Resin Wave
HTML-код
- Опубликовано: 22 май 2024
- I have been practicing waves for years now and still have times when they don't work out. There are so many videos out there but so many are on huperlapse (I have posted them also) and it's hard to follow "how" it was actually done so hopefully this helps at least 1 person. I am the worst at overworking the white trying to get the cells to appear. As you see, the cells continue to appear after you stop pushing it with the heat so many times you have to just stop and watch.
Formulas will be different for each resin because they react differently based on their cure time and viscosity. I am using Jdiction 4 hour cure resin in this video. It is thicker, and your wait time won't be as long (30 min), but when I use thinner resins that have a 12 hour or 24 hour cure time, I wait 45 min to an hour before laying down the clear and the white to push the waves.
Another huge factor that comes into play is the temperature of your work area. check with your particular resin for the recommended temperature. Mine are typically 73° and above. My room temp was 83° when I created this piece.
*Always work in a well ventilated area and wear prpper PPE when working with resin. protect your family and pets by sealing off the area while working and curing.
Here are my Amazon links for the products used. *I am an Amazon associate and earn a small commission from qualifying purchases. I appreciate all that support my channel and the amazing feedback that helps me to continue this journey.
JDICTION resin: amzn.to/3Xcpj6r
Let's resin white pigment paste: amzn.to/4bNgy6G
Silicone pouring cup: amzn.to/4bvneGG
Clear disposable cups: amzn.to/4blEoGR
Nitrile gloves:amzn.to/3yA9H2b
Respirator: amzn.to/3Vel6h8
Extraction Fan: amzn.to/3yrWDf4
It’s absolutely beautiful! ❤❤❤ I love the natural look it gives.
Thank you so much. I love it when the wood grain shows through.
I’m so glad you added to your first comment ‘these are so easy to do’ later in the video, by explaining that getting the waves right can be tricky. They may be quite quick to do, but they’re not easy… it is something that most people need to practice a lot before getting them right. As you said, there are a lot of factors… is it too soon? have I used enough white? is it too thick?
I just hate the thought of people trying it, not getting it right, then thinking they’re useless because ‘it should be simple’. I nearly gave a couple of times, because I just couldn’t get a good wave, but I kept at it and now (most of the time) I can get a beautiful beach!
Yours is just stunning Lisa… and a great tutorial too!
Much love, Nat. ♥️♥️🇦🇺
I agree 100% I almost gave up also but I'm too stubborn for that 😆 The hyperlapse videos are fun to watch but are not helpful when first learning because it is a slow process. Too much heat has always been my downfall. I'll have the perfect cell action and then ruin it by not leaving it alone. We all learn from our own mistakes. Thanks for the feedback. ❤️