Yo Bizzy!!!! Love your upgrade game cuz. I’m about that too. Did you at least give it a rip stock??? It’s not bad for its size. Very enjoyable stock motor and esc.
@Booth73 .Them are Protek RC Tru Torque screwdrivers and Drill bit drivers, you can get off Amain Hobbies. the drill is Milwaukee 3/8 impact I got from the Home Depot
Dam this thing looks sick very creative might do it to mine when I open it it’s currently wrapped under my Christmas tree lol…Do you have a link for the exact hubs you used?
@TheK20eg . Thanks 🙏🏾…I have feeling it might be opened before Christmas 🤣😂. The hubs are part# TRA9085 and the hex’s are TRA5353A Traxxas also have a aluminum upgrade set part# TRA9086 just google the part# are see if you LHS has them in stock 👊🏾💯
@@LBizzyRC You’re welcome and you right my birthday is next Tuesday lmao. I might just open it then and install the wide kit and thanks for the part numbers you are the best 🔥. I just ordered the hubs and hexs nice cheap upgrade 🤪
@@LBizzyRC Sooooo i opened the maxx and did the upgrades 🤣 Do you have any 3s battery recommendations none of my battery fit i currently switched to the 3s system aswell
@TheK20eg . Nice 👍🏾!!! Try looking at CNHL 3s lipo they have some I got a couple of CNHL G+Plus 2200mAh 11.1V 3S 70C Lipo Battery with XT60 coming, they are just a couple of mm taller hopefully they fit👊🏾💯
@@Schmidt3850 With no intentions to buy you sure are worried about it. You should go and watch ARRMA videos. Then maybe Traxxas won't be so deep in your head. 😉
That’s pretty cool upgrades don’t worry about the negative comments. I’ve seen several $800-$1000 rigs being upgraded with motors and ESC, suspension parts gearing and so on. I own an off-road RC track and I’m building a track for smaller groms and the mini maxx inside of my off-road track. It’s going to be epic. I also ordered a mini max and don’t plan to do any upgrades, just run it on my track. Most of these people are just jealous because they want one. I don’t want to admit it.👍🏽👍🏽
Enjoyed your video !
Great vid brother!!! Great upgrades, i still haven't driven mine yet.🤘🤘🤘
@jdsrcs8061 .Thanks 🙏🏾…it’s a fun little rig no doubt 👊🏾💯
Sick bro! Can’t wait for the run vid mane
@georgewilson4614 . Thanks 🙏🏾
GREAT JOB! I'M EXPRESSED. I WANT ONE👍
@mariomozie2102 . Thanks 🙏🏾
Great video man awesome ideas with the jato hubs. can't wait to see more of it
@philhull29 . Thanks 🙏🏾. It definitely looks a lot better with the jato hubs.👊🏾💯
Doc, the Maxx looks good! You have made me reconsider buying this rig! 12.7.24
@jhicks1774 . Thanks 🙏🏾 it’s not all that bad glad I was able to help make your decision on it👊🏾💯
Well Done Mate!
@bogdanradiodj . Thanks 🙏🏾
best review champ😍👌
Very nice
Thanks 🙏🏾
That esc and motor combo should be awesome i mite need to order one for mine but im not sure if i should go with castle creations or hobbywing
@nickkoepplinger9204 . It’s just personal preference for me easy to program and with the new G2 system it’s sensored a win win.
Yo Bizzy!!!! Love your upgrade game cuz. I’m about that too. Did you at least give it a rip stock??? It’s not bad for its size. Very enjoyable stock motor and esc.
@chrisdoval7205 . Thanks 🙏🏾… I was thinking about it, but the Max10 was calling😂😂
Did you use the new jato's hubs that just came out or the nitro version jato? And are they 17mm ? Cause that is awesome
@nickkoepplinger9204 . Yes them are the new jato BL-2’s hubs. 17mm 👊🏾💯
Nice 🦇
Thanks ✌
What brand tools are u using and where can i grab them?
@Booth73 .Them are Protek RC Tru Torque screwdrivers and Drill bit drivers, you can get off Amain Hobbies. the drill is Milwaukee 3/8 impact I got from the Home Depot
Dam this thing looks sick very creative might do it to mine when I open it it’s currently wrapped under my Christmas tree lol…Do you have a link for the exact hubs you used?
@TheK20eg . Thanks 🙏🏾…I have feeling it might be opened before Christmas 🤣😂. The hubs are part# TRA9085 and the hex’s are TRA5353A Traxxas also have a aluminum upgrade set part# TRA9086 just google the part# are see if you LHS has them in stock 👊🏾💯
@@LBizzyRC You’re welcome and you right my birthday is next Tuesday lmao. I might just open it then and install the wide kit and thanks for the part numbers you are the best 🔥. I just ordered the hubs and hexs nice cheap upgrade 🤪
@TheK20eg . No problem bro hope you enjoy the setup 👊🏾💯
@@LBizzyRC Sooooo i opened the maxx and did the upgrades 🤣 Do you have any 3s battery recommendations none of my battery fit i currently switched to the 3s system aswell
@TheK20eg . Nice 👍🏾!!! Try looking at CNHL 3s lipo they have some I got a couple of CNHL G+Plus 2200mAh 11.1V 3S 70C Lipo Battery with XT60 coming, they are just a couple of mm taller hopefully they fit👊🏾💯
I have a orange one I put wheel wideners on mine and a 4500kv motor
@ritty975 . Nice 👊🏾💯
nice!
Thanks!
What kv you running
@nick_stag . That’s the 3300kv motor
Welcome to the world of Traxxas. Passing up the cost of the truck with upgrades by a long shot
😭💦💦💦🌊🌊
“The lesser of two evils”
@@Schmidt3850
With no intentions to buy you sure are worried about it. You should go and watch ARRMA videos. Then maybe Traxxas won't be so deep in your head. 😉
Call it what you like. The reality of it is it is a Traxxas rip off.
@@Schmidt3850
And you claimed that you bought one🤡
Nice video my guy. New subscriber 🦾🫡
@ikonzrc .Thanks bro 👊🏾💯
Its cool making something into what you want it to be but I know what your making, it's called a 1/10 scale truck.
@chriszak3283 . 1/10 Mini Monster Truck 👊🏾💯
Hello avec un moteur plus puissant et des roue plus lourde les diffs arrières vont casser il sont fragile
@jeromeaurejac7520 . I think the diffs will hold up just fine the wheels are not that much heavier just a tad bit bigger 👊🏾💯
The gears are way to tight
@zip-tieracing4307 . Stock pinion same motor mount holes haven’t had any issues yet 🤫
Of course everyone buying it just to spend more money on upgrades.
@Harvz78 . Some do some don’t it’s just the fun of the hobby.
That’s pretty cool upgrades don’t worry about the negative comments. I’ve seen several $800-$1000 rigs being upgraded with motors and ESC, suspension parts gearing and so on. I own an off-road RC track and I’m building a track for smaller groms and the mini maxx inside of my off-road track. It’s going to be epic. I also ordered a mini max and don’t plan to do any upgrades, just run it on my track. Most of these people are just jealous because they want one. I don’t want to admit it.👍🏽👍🏽
@IMGONEIN60 . Thanks 🙏🏾…That’s pretty cool you got your own track
My merv diffs held up on 3s…. Waaay better, this thing is a joke
@M14armorer . I think it can handle 3s with no problem. And might be the sweet spot for it .