Project 4mil Part 10 | Banshee Lock Up Clutch
HTML-код
- Опубликовано: 28 авг 2024
- Trick clutch cover came in with a badass lock up set up!
Project 4mil Part 10 | Banshee Lock Up Clutch
Here's a quick video of the new lock up clutch cover and some other goodies from Farm and sand toys! If you want one of these bad boys for yourself, check out farmandsandtoys.com!
If you enjoyed, please comment, like, share and subscribe!
Thank you for watching!
Want to reach me? Email me at..
michaelsabo350@gmail.com
Add me on Facebook and Instagram
Facebook: / atvcrazy91
Instagram: / michaelsabo350
Miscellany Art
Website: www.miscellanyart.com
Instagram: miscellany_art
DBC Racing
Website: www.dbcracing.com
Instagram: dbc_racing
I own the license to use any and all music in this video.
Thats where I go for my raptor jeff and cody do amazing work!
I had Jeff and cody from F.A.S.T build my whole 4 mil motor and it sure does SCREAM definitely really good guys to do business with
That colt 45 just made this video that much better you are my hero
Hahaha 🤣
Of all the channels I follow this one is by far the best. Detailed videos on rebuilds and just down to earth guy thanks for the upload brother !!
Thanks so much for the positive feedback man! This means a lot to me!
It's beautiful.
Don't cheap out on parts thats for sure but definitely cheap out on beer. Please tell me you don't drink that on a regular basis. Badass build!
mike this series is awesome! now im building a 4mill cause of it! this helps more then you know. thanks
F.A.S.T. Racing is the G.O.A.T.
Keep up the good work.
Colt 45 ayeee 🤘🏽🤘🏽🤘🏽
Sweet vid Mike, that banshee is gonna look sick!
What up Austin! Thanks for the love man 💪👊🤘
Really enjoying these build videos. I’m doing a compete build on my blaster the same way your doing your banshee. I got a Vito’s crank with a wiseco 68mm piston, trail ported with boyesen dual stage reeds and pro circuit exhaust.
Nice video!👌 Never seen a lock up clutch set-up before. Engine is looking insane😍
Thank you brother! 💪👊
Awesome vid and bike
Water pump impeller stock is best cause they have a hard lubricant coat that high volume aftermarket dosnt have and the seal wears the shaft in no time at all then you have a problem of coolant leaking into trans oil plus the high volume one cavatates the air.
Ive run both .ive run stock water pump in my 4mm serval ported by redline 85hp for hundreds of hours no wear at all and cool as with standard rad as well.
Awesome Mike《☆》Good choices :*: It would be cool if there were some way to light up the inside now with the clear cover ☻
Daamm Colt 45! Good shit! Can’t find it out here in Cali
That clutch ‘lock-up’ is a Slipper style clutch. This is an older idea, that was being developed in Drag bike Racing community. As for the Aluminum Composit, just means that there is less Tin and more nickel alloy and possibly more titanium, depending on the foundry or cast house who made it and how much they wanted to spend to make. It looks to be an “investment Casting” which is a higher end cast housing. Instead of using the basic sand casting. This entire clutch works purely off centrifugal mass rotation . If you want it to engage faster, use less weights, a slower lockup then you use heavier weights. This is all to maintain a certain RPM range for maximum power band. Everything on a 2T is to dial it into a certain maximum power band. If you do not understand these concepts, the first thing to happen is you’ll burn up a clutch so fast and probably get stranded out in the sand or woods. I would strongly recommend having a PRO do this mod, unless you understand it and are a really good mechanic.
Nice parts to
Great vid
Loving this series bro 👍👊
Thanks for watching man! I'm glad you like it!
Hell yeah!
Wow that is nice
Thank you man!
I would like to see how the gasket waste from the cylinder heads and cylinders is cleaned. Please!
The head does not use a gasket on this build; it uses o rings to seal. The lower gaskets do have some excess but it's in areas that dont bother me. If I really wanted them cleaned up I'd either do a dry run and mark with an pencil where to cut them and then put it together or trim them with a razor.
IF YOU NEED TO READ WHERE YOUR KICK STARTER IS AT YOU GOT SOME PROBLEMS😂😂❤️
Lol 😂
Michael Sabo made my day😂 when you said that
Wait aren’t you going to replace the plastic water pump gear with aluminum one ???
Where’s the two zig zags?
😂😂😂
Do a 1987 trx250r build!
It may be next!
Definitely a 250r build but do a 88 or 89. They were by far the superior model out of the 4yrs honda made them.
jason wagner oh yeah for sure!
@@jaywagner13 My dad had an '89 bone stock. I'm a little bummed he sold it about 8 years.
Did they send the colt 45 to lol. But that cover looks amazing.
Finally yessss
💪👊
Michael Sabo loving the build man. You seriously inspired me to work on my bike. I sent you pics on Instagram that way you can post it. Ig is TIFELIXJR
Calt 45 is that the name of your drink 😁😁
U touching the suspension at all on the bike?
@Jared Stevenson I swear that is the one thing stopping me from pulling the trigger on a banshee.
@Jared Stevenson I think the banshee is a fun quad to ride in short blasts. But a yfz450 might be better for hitting the trails all day.
As far as the trx250 conversion, does it dramatically help with handling? Jumps, trail riding, track?
Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly! Assembly!
I’m ready to see this fucker scream!!!
💪👊🤘
hello friend I have a problem in my 2006 yamaha banshee when I put the first one it turns off that could be??
Cant you just put stronger springs instead of that lock up piece?
Porque no le ponen subtítulo en español para los que no sabemos inglés 😢🌝
Aren’t these bad for trails their more drag bikes with straight cut gears or no ?
They're for dragging racing. You gotta be careful with the way you downshift them. Or you're going to have a problem. 🤦🏾♂
I would like to know your take on a recluse clutch
Recluse is a clutch where you wont a tall out if I'm not mistaken? I've never run one but I can see how it would be a big help in woods or xc riding.
Are you gonna race that banshee ?
Broooo! R u really drinking a Colt 45? That crap gives u the shitsssss in the morning hahahaha. U want a Cobra or natty daddy Sir lmfao 🤣
Cuantobale un namakina desa
When will it be done, waiting on that video
I am hoping within the next two weeks it will be running 🤘
You do Great work, watching your videos and STB videos keeps me in my garage. Much success
First comment again
And like
👊 thank you man!
Michael Sabo no problem man
9th comment
🏁
Hgddu SwiftKey