@@simoncoher4841 no but I hear they are very good and have lot of features to measure air usage etc . It’s also very handy to charge it instead of taking it apart to change the battery
Thanks for your review. I installed EDMU and made more than 100 shots, but the AVG and other values are not displayed. According to the manual, "If there is still no data to analyze (you have not made a single shot yet), a dash is displayed". How do you do "Single Shot Made"?
hello good morning the cables of the bases were cut and I only soldered but the manometer does not work, I put pressure on it and it does not mark the pressure bar or psi ,,,,,, will the position of the cables be ??? help greetings
Any one heard of this , I have a wika gauge and it read 135/140 bar , when I put the digital edgun gauge it read 156 bar , can wika really be that off , or it the edgun reading wrong ? Thanks
That’s strange 🤔 the EDgun should be very precies but if I had to choose I would trust the analogue wika . With electronics you never know what’s going on , even EDgun is going back to analog wika gauges
Just bought this gauge. But i have no manual. Where do i find the manual??
This I don’t know , never have seen a manual myself 😉
@@Airbuks
Oh....would be nice to know all functions. Someone must know what is it all for!!!!???
Do you have to let the air out of the gun to change the battery? Do you have to remove the gauge from the gun to replace the battery?
No , you can change the battery while the gauge is still in the gun
Will this guage fit 1/8 NPT which is very popular and common in Airguns?
I don’t know , I thought 1/8 bsp was the most popular 🤔
Do you have electronic pressure gauges for sale
No
Hi mate this gauge does it fit the FX impact M3 do you know ?? Where the first reg goes I've been told they do ..
Thank you Simon..
They do fit as they share the same connection threads, but to be honest there are better alternatives on the market 😉
@@Airbuks Hi mate been looking at the Digital schkmet gauges do you know much about those ?
Thanks..
@@simoncoher4841 no but I hear they are very good and have lot of features to measure air usage etc .
It’s also very handy to charge it instead of taking it apart to change the battery
@@Airbuks very true mate , i am going to order over weekend my fx 1 on my first reg is stuck on 200bar and don’t move now ..
@@simoncoher4841 the one on the first regulator is still that old style one no wika or did FX puts wika on the 1st aswel now ?
Good day, I changed to a Huma Regulator (set at 110 bar) in my Leshiy and wanted to know do I need to change my EDMU setiing to 110 bar as well?
If you want to use the full potential and functions of the EDMU then yes 😉
Thanks for your review.
I installed EDMU and made more than 100 shots, but the AVG and other values are not displayed.
According to the manual, "If there is still no data to analyze (you have not made a single shot
yet), a dash is displayed".
How do you do "Single Shot Made"?
Do you have to let the air out of the gun to change the battery?
Normally not , but always be careful when working on high pressure airguns . Letting the air out is quickly done 😉
@@Airbuks Letting the air out is quick but pumping it back up is not.
hello good morning the cables of the bases were cut and I only soldered but the manometer does not work, I put pressure on it and it does not mark the pressure bar or psi ,,,,,, will the position of the cables be ??? help greetings
The position of the cable are very important for it to work 😬
Thanks for sharing this.
Well I was in there I'd give it a touch of CarossionX! 😅 just a personal choice... do at your own risk 🤪
🥃 cheers 🍻
good job
Any one heard of this , I have a wika gauge and it read 135/140 bar , when I put the digital edgun gauge it read 156 bar , can wika really be that off , or it the edgun reading wrong ? Thanks
That’s strange 🤔 the EDgun should be very precies but if I had to choose I would trust the analogue wika .
With electronics you never know what’s going on , even EDgun is going back to analog wika gauges
Thanks 👍
Hola .disculpa tengo un manómetro de esos i no me marca la presión. Lo e reseteado i marca 5
English plz ?
sorry .my edge gauge stopped showing pressure. mark 5 brs i 120 .but I reset it and still does not raise pressure!
Facebook?
@@dsdaviddse have you tried changing the battery?
Yes change batery
Thanks
Music extrem loud.
Sorry about that , it’s a video I made when I started videos on RUclips 😬