NBA FASTBREAK COMES HOME - Major Havoc Fix, Paperboy Troubleshooting, and NBAFB Pinball Fixes!
HTML-код
- Опубликовано: 6 сен 2020
- Join this channel to get access to perks:
/ @johnsarcade
Enjoy the vids? Consider supporting me! Thank you, John! youtube.streamlabs.com/johnsa...
Check out my weekly podcast: www.videogameoutsiders.com 
Игры
Man, I'm so glad these videos are back.
It's great stuff, no doubt.
I remember watching ur 2010 videos touring your game room. I was 8. Now I’m 18. Time flies
It fulls my heart with so much joy to know that the videos are back keep up the great work John! 👍🏻
John, take a trip over to Jay’s basement. Let’s see his cabaret collection!
GOD it's been a minute!. Been busy fixing arcade games at my work in AZ. Also a pinsetter mechanic and I love your videos. Glad to see another video from you, John!
So glad you're back!! Awesome vid 🤟 love that NBA Fastbreak! Its FANTASTIC!!
Glad to see John working on the arcades with Jay, open the door to the garage 🤣 (so iconic) nba pin get some love , checking that juicy pork , perfection! 😂
Very happy John's back! I'm finding myself pausing the videos just to make them longer.
I miss these repair videos so much.... So glad youre back!
dude its sooo good to see you again john missed ya bud...great video as always!!
Glad your back! Thanks for another great video!
The repair vids are back - wonderful! 👍👍👍
So so glad you're back, John. I've really missed your videos.
Welcome back! You put out quality content
Jay is a great cohost, love that you guys are back. I blew the same fuse in my fastbreak, couldnt figure out how. Also the previous owner subbed in some Home Depot fuse that wasnt quite up to spec. ps Look into LED OCD for your Fastbreak! If only to smooth the GI dimming, love mine.
Glad to see you back John!
Glad you are back, John! Can we get a video tour of the basement? So much has changed! Like, where's Journey? You worked so hard on it. It's sad to not see it there. Love to you and your family.
Can't wait to see the shop work on the NBA fastbreak, I like how unique that pin is
John - Great to see you again man!Keep it up
Keep the videos coming. I know your probably bored of games in the garage, but enjoy them cause that is a amazing variety.
John you are the man. Thanks again for -ANOTHER- great video. Famine for a while but now it's time to feassssttttt!
The cabinet and pinball collection is awesomee man 🔥😍
Glad you are back!
Nice house call from Dr. Jay. I bet he'll get those arcades open even if he has turn them into a casino!
Entertaining video, per usual. Thanks. Cheers for now.
'Jays Arcade Game Reviews & Tech' in this epirsode with John and TIm.
Woot, Jay back at it again
Nice!! Another episode of Jay’s Arcade!!! 😄
Massachusetts logic:
- Video arcade and pinball games will spread COVID-19.
- Casinos and slot machines will not.
It makes sense when you realize that it's hopelessly corrupt on Beacon Hill, has been for generations and people are probably being paid bribes.
John... i love that you are back man.. i missed you!..
Great Vid!
LEDs in pins are cool but if I get old pin I would keep ald types bulbs.Gives you that amber analogue 80s lighting look and feel from led but less are still awesome.
I had my theater of magic overhauled and the guy who overhauled my machine went overboard and the game looks like crap... I might switch back to incandescent if it is not too expensive
John. Get a powerful tool magnetizer/demagnetizer. They are cheap and it will be the best money you ever spent. Keep one in each toolbox. Second. More and more I now see the value and needs of 3d printers. You don't need an expensive one but one that can be setup quick and ready to go out of the box with a little learning curve. I am pretty sure there's likely a community that 3d prints all sorts of things you cannot find anymore. Think about just this video alone. 3dprint a corner brace you can use to screw and secure both boards together tighter for Major Havok or 3dprint plastic standoffs and and odd parts you cannot get anymore for these older machines. New motherboard brackets. Someone's probably made these already in file for you can just upload to a printer and test print them. Get a decent starter 3dprinter that won't break the bank. I am sure many have some suggestions. (I am just starting to look myself) . So glad you are back!
quality tuesday evening entertainment this, thanks
Great Video..!!!
If the van is a rockin', don't go knockin'
I've noticed a few of the last times while you doing viewer mail, that spaceball game in the background the vertical keeps bouncing around.. might be a shorted tube in the vertical section..
I switched over to Comet Frosted Sunlight LEDs for GI. Its the best, not too warm not too white.
John you are the reason for my existence.
my life feels complete now.
John, please be careful using that microfiber cloth on the lexan/plexiglas, I made the mistake of using one of those on lexan and the fibers of the cloth melted into the surface of the lexan as they are both plastic. I highly recommend you only use cotton cloths on plastics. Lesson learned for me, fortunately is was something that was easily replaced in my case.
I didn't see any scratches or anything. I think it worked great.
It’s nice to see NBA Fastbreak back in the basement.
If you have a short, you could use a FLIR camera to see what part gets hotter than usual. Yes, touching each part could work as well, but if you have more games and locations, you could use FLIR camera during normal maintenance to locate problematic parts that are on their last leg and it's much faster, if you check multiple games.
I think what happened is that loop made switch wasnt registering, so that mean the game wont go into "in the paint mode" which uses the defender. I had the same issue with the right loop made switch, which is a harder shot to make. Also the diverter on that right loop is a pita.
Hi john, something that looks a bit dodgy on those power supply’s is the glue that’s holding down the big caps. That stuff starts to become conductive when it turns brown so might want to check it’s not shorting any tracks or solder joints or via’s. man I wish I had that arcade set up during Covid lock down you wouldn’t of seen me for months .
Jay's got a Transit!!! So great that they're sold in the US nowadays :)
I highly recommend trying orange Titian rubbers. Found they play and clean much better than the regular white rubbers
When you started Viewer mail, is TRON's screen kinda flickering or twitching? Maybe it's just the camera shutter speed?
John, forget about that ARIII in the Paperboy. Power the video board with another switcher or get a 15 amp switcher and power both boards with that.
Could you check your power supply by bridging the +5v and ground with a suitable sized resistor (several hundred ohms I think you said), and then measure if the same drop in voltage occurs as when you plug in the board? If so, the PS is bad.
John, I'd definitely be re-seating all the chips and even check all the ROMs...
I've had ROMs bring down the voltage on one of my games...
Im still using Radio Shack solder as well Tim ha. Agreed John, working on games with a few guys is better; you should hang with us monday repair nights at Freeplay in Prov.
Cool vid.
-Mitch
Still have batteries on your board too, you should consider upgrading to nvram when you get a chance; then its 1,000%
ha ; )
Nice work.
*Clean the edge connector fingers with a fiberglass pen, on the MH, then hit it with some DeOxit. And do it for both the game board and the adapter board. This should be done once every few years, and especially if you've never done it. That will keep 99% of Atari power issues away.*
This is life, Buddies!!!😄👍👍👍👍👍👍👍👍👍👍👍👍👍👍! You are really (still) free, over there in the US!
Dear Diary, Hi it's me John, I am in the basement, i have replaced the voltage regulators...........Great tag team, John, Jay and Tim , loving the videos
Major Havoc L Bracket www.arcadeplastics.com/major-havoc-to-tempest-conversion-pcb-stabilizer
Hi John. Great to see you back. Just wondering if you know of someone I can contact for a Time Pilot upright control panel with hinge. No need for the controls. Cheers 🍻 John
Tha Golden Tee was a DDR before
You some Titan colored silicone rubbers John! They are fantastic.
John any chance we might see or hear from Gregg like in VGO? I miss seeing colabs with Gregg and his crew too.
I was so waiting to see the update to Hanger like year and half years ago,but now my heart went to wtf moment ,it so sad.I hope it pick up John,miss the video from the past.
Hey John I have a cruis n world that after 10 minutes of running it started to glitch out and now when I turn it on the screen and marquee turns on but nothing displays on the screen and I don’t hear any sound. Any idea what could be the problem?
You should have sprayed some deoxit into the switch and worked it in to see if it got any better ?
Only the grounds are common between those two power supplies.
holy cow..I thought a regular arcade would have tons of mess inside..but that's nothing comparing to the pinball..it's a jungle in there.
Popcorn machine, check. Stable table...
Countdown in Pole Position never gets old. 🤔🙋😎
are you talking about his cab or Adam's FPGA version :)
@@808v1
Whichever one that was providing background noise during the repair. 🤔✨
I use to put John on ,and sleep to his Videos before Joe Rogan's podcast.KEEP THE CONTENT FLOWING BRO.
I think the Arcade1Up cabs are great for what they are. If you’re expecting the quality of an arcade machine that would have cost you 10 times as much when they were new, obviously you’re mistaken. But if you don’t have money or space for real cabs, and you want some to bang around on and give you an arcade like experience with friends, or with your kids, they’re perfect. Plus, supporting companies like A1U will only be good for the hobby in the long run, imo.
I really did miss the kill screens music, any physically CDs available?
NBAFB is so dope
FYI... Good solder flow is from the FLUX core infused in the solder...not the LEAD content in the solder...smh
an arcade with a couple thousand roms vs the real ones. Which one gives you the classic feel to the retro world?
Was this live god dam,i miss it.....
JAHN I've got some spare time on the weekends if you ever need a cameraman.
What's the control panel height on the ms Pacman cab
It is illegal to sell lead to consumers here in eu now so it's impossible for me to get leaded solder anymore. When I run out of my good roll of leaded solder I'm not sure what to do, might order some solder from aliexpress and hope it gets through customs lol.
Bought my camper in Westfield!
39:40 I'm surprised you don't own a Snake Light
never check a fuse in the holder!
John: Releases new video
Me: Fan girl noises
My wife: What the fuck is wrong with you?
Me: More fan girl noises pointing at the screen.
My wife: Are you going to watch that guys ass again?
Me: Fan girl noises intensifies
I also collect arcade games. I understand and agree with you completely on the Arcade 1-Ups. However, when it comes to TMNT and Burgertime, I own them. Why? I just cant see paying 2000+ dollars for either game. Those two specifically have just gotten so insanely expensive that I wouldn't own them otherwise. I'll probably eventually own the Golden Axe Revenge of Death Adder cabinet for the same reason.
Also, isn't a Holy Grail game one you don't yet own because it's unobtainable?
Can’t you order the parts online
always always always shut the coin door before pulling the glass...
I can't stop looking at the computer space ball because its monitor keeps bouncing and collapsing in the background
Lol....The games i play most in my game room are donkey kong and dragons lair 2
Theres no way to 3d print some of these parts?
Someone should start selling a mini triangular bracket that would keep that board in place. The board has holes already. That's a good item to sell.
Feel bad not John. I bought a WOZ YBR pinball machine NIB and had to take it back to the distributor to fix several issues!!! Disgusting!!!
John, you don’t like working on the machines alone, so why don’t you do more live stream shows. Than the viewers can give you input on the problems you have.
If there's a pinball machine I would love to own is an F14 TOMCAT...
I am so jealous.
I ordered similar fuse box from Amazon, should be fast blows and not slow blows
Why don't you start a repairs record for each machine?
for me Gyruss is awesome...
Acknowledge Arcade!
What’s the music from,I’d be interested in buying it
John's band The Killscreens: soundcloud.com/thekillscreens/want-and-need-mastered
The first album is on Amazon music: www.amazon.com/Science-Fiction-Movie-Kill-Screens/dp/B005BGWG5A
Flux is your friend!!
HAI! Premieres rule!
T2 was and is the shit! And Earthshaker
Where is Journey ???
Please update us as you haven't said anything about it ?