Incredible! I have piano black on my center console and window switch bezels in my 2015 Lexus GS350. I see myself doing this project someday in the near future. Probably when my wife is away visiting her sister for the weekend, because she just doesn't understand that level of obsession over car stuff. 😜😜
Great video! Going to do this to my car’s interior… people at the car wash didn’t seem to understand how to clean piano finish. They were abrasive and the surfaces are all scratched up and dull.
Thx for the video, is it a good idea that after you remove the scratch put a transparent vinyl protection like you put on you hood, so it does not happen again before reinstalling everything? YThx.
Gotta admit I only watched this video because the thumbnail was very familiar and I was curious ;) Great video though! really informative and your other videos look good too 👍
@@Amddetailing hvala ti na odgovoru ,j os me nesto interesuje konkretno u vezi vune za cut fazu ,kada se koriste duga i kratka vlakna,tj u kojim situacijama ? Svako dobro maestro 💪
Amazing! Could you please list the pastes used? Or in general what characteristics it should have because its hard to know which polishing pastes will work on plastic. Thank you very much 🙌🏼
What is PPF coating? And, can I use P2500 instead of 3000? I couldn't find any 3000s around me in them shops. Perfect vid, solves all of my problems I had :)
I'm so glad that I found your YT and FB page - it is true and pure paint correction and detailing work. I wish to have 10% skill like you have!
Tnx my friend and enjoy
Very well detailed video. Touched all key points and not too long. Thank you
Incredible! I have piano black on my center console and window switch bezels in my 2015 Lexus GS350. I see myself doing this project someday in the near future. Probably when my wife is away visiting her sister for the weekend, because she just doesn't understand that level of obsession over car stuff. 😜😜
Hahahhaha
Hi. So happy to have found you Can you list the products you used ? 3000 grit sandpaper with water and what from
There. Thanks so much. Be well
Great video! Going to do this to my car’s interior… people at the car wash didn’t seem to understand how to clean piano finish. They were abrasive and the surfaces are all scratched up and dull.
Great video! Straight to the point. Thanks for all the information. :)
Really love watching your videos I’ve learned a lot after following you last year.
Tnx my friend
How did you polish the controls without damaging or erasing the detailing marks
Hi, thanks for the video. For polishing, did you use only ewocar 2fine cut or first ewocar heavy cut and then 2fine cut?
first heavy cut
any ideas on what compounds and ceramic coating should i buy from Amazon UK? I cant find ewocar there, any other relatively cheap alternatives?
great video ! what type of polish or compound did you use on the buffer ?
Ewocar
God job! Following from Brasil
Tnx my friend
Great !! Looking showroom !
Ultra superb.... Quality job ❤❤❤
Great video. Thanks for sharing!
That was excellent. Very informative. Thanks.
Tnx my friend and enjoy
Amazing work. Very well done video.
Can you post info on the products used? Paste?
Ewocar Compoud, you have video in my channel
Awesome job! Did you treat the control modules (the ones with the clock, piano switches etc.) with the same procedure, or only with fine cut? Thanks!
the keys on the console are made of glass and are treated with fine
Awsome brother!🤩🤩
Tnx my friend
whats the compound and polish you used?
So, do you use 2 different cutting grades of the same compound? heavy cut with the wool pad and fine cut with the foam pad?
Did you use the same compound with the wool pad also?
yes
You are fabulous
What about the same problems, drop a tutorial how to fix the ones made with wood please
Thank you
Ok no problem😉
Thank you for sharing us!
Enjoy😉
Fantastic video! I have the same issue with the same model of car. Is there a way of polishing the silver trims around the piano black?
Yes,you can
@@Amddetailing thanks for your reply, is the method the same as the trims are metal and the panels are plastic?
Does this apply to clear plastic? There's clear plastic that covers the gear indicator next to the console in my car
Thx for the video, is it a good idea that after you remove the scratch put a transparent vinyl protection like you put on you hood, so it does not happen again before reinstalling everything? YThx.
Yes it is best protection
Gotta admit I only watched this video because the thumbnail was very familiar and I was curious ;) Great video though! really informative and your other videos look good too 👍
Tnx my friend and enjoy
Did you sand over the logos of buttons too? I’m afraid that they will fade if I do
the buttons are made of glass
Maestro ,svaka čast 👌 koja roto polirka je u pitanju ? Pozz
Hvala Dewalt je polirka
@@Amddetailing hvala ti na odgovoru ,j os me nesto interesuje konkretno u vezi vune za cut fazu ,kada se koriste duga i kratka vlakna,tj u kojim situacijama ? Svako dobro maestro 💪
@@SS-jv2em sve zavisi od laka nema pravila tu probas jednu i druga i koja bolje radi tom radis
@@Amddetailing hvala, pozdrav
Torx(r) not Torex
Sir is it possible to remove small scratches on Plastic trim that around the wheel tires without using many tools?
Yes,try
Can the polishing & buffing be done by hand also?
very hard
awsome job fella
Tnx😉
A much better thing would be if they stopped putting this crap in cars….everyone hates it, but they still persist in using it.
I love it! Very classy
How do you know if there's enough material there for standing without burning through anything?
that is why it is done with fine granulation
@@Amddetailing Thanks for the info....are there any times when you decide not to sand and just use foam & polish?
Can you recommend a polish compound that’s available in US?
McGuires 105 for rough cut and 205 for fine cut
Looks great. Good job. The manufacturers need to move on to using something else.
that's why they did this, so they could make money from spare parts
When to know when to use dry or wet sanding,great video keep it up👌
Dry sanding is fast
Nice video
Thanke you
Hi may i know how to remove alcohol parfume stain from piano black gloss panel? Thx so much
If it is a matte console, you have to paint it, and if it has a coating over it, ie if you polish it in gloss
How did you polish buttons?
the buttons are made of glass and can be polished
Amazing! Could you please list the pastes used? Or in general what characteristics it should have because its hard to know which polishing pastes will work on plastic. Thank you very much 🙌🏼
Ewocar compound
Amazing
Tnx
How do you know when to sand with water or when wet sand and dry sand?
Never sand the interior
What type of polish do you use?
Ewocar
Can you begin with the 6000 grit?
No
what would you charge someone for this job?
100 euro
THANK YOU
What is PPF coating? And, can I use P2500 instead of 3000? I couldn't find any 3000s around me in them shops. Perfect vid, solves all of my problems I had :)
Oh, I'm dumb, I figured it out with the pinned vid already :)
❤️❤️❤️❤️❤️❤️👌👌👌👌
Our PB trims look absolutely terrible and I always used a microfiber cloth to clean them. Such a terrible interior trend.
Am I missing something? What is “the paste?” Great vid but…
Polish compound
Torques tore x
I'd rather vinyl wrap this b******* and never deal with it again...
The music...seriously?!
Amazing
Tnx