The removal of the B pillar went perfectly fine based on your tutorial. The problem I am facing now is to fit the pillar again properly in order to allow the seat belt mechanism to slide up down. What is the trick there?
@@xXdeathisanilusionXx Slider is controlled by a plastic part maybe its stuck with some stopper. Its like a guide. If you want more detailed just e-mail me sobzsunny@gmail.com.I can share you teardown images of the Back side of B pillar
I've tried to remove the B pillar trim on a4 B9 following this video but i cannot remove the right bottom edge part no matter what.. the left goes easily off
@@RomanDoes yeap, i was thinking that q5 is similar to a4. This is from a4 b9, seems 4 clips too.. images.recar.lt/images/XkVM6XXlNE/800/10010464_2c1c1c22-6745-4d64-a65d-688e291b570b.jpg (8W0867294 & 8w0867244e)
Hi I have a Q2 and want to remove the A pillar trim. I can pop the top open but the second clip wont disengage no matter how hard I pull. And before someone says it there is no "AIRBAG" symbol on it hiding a torque screw like you see in other videos. (there is however an airbag there) Any help guys would be appreciated.
@@RomanDoes I have a 2010 Combi A4. The plastic cover I meant is located on my car just next to the door grab on the backside of the car just on the left side up of the B pillar. Meanwhile I figured it out that it was a torx there that was needed to be removed and then the cover comes loose.
@@RomanDoes no vent on the c pillar. Also the trim piece is much deeper toward the rear and hard to access. Have you done removed this part before, I don’t want to force or break anything. Thanks!
@@kevinstrawbridge3981 oh wait, you talking about C pillar. Sorry I misread your first message on the go. C pillar is evil. Let me ask you, what are you removing it for? Is it for dashcam wires?
Thanks Roman, used this to the trim from our Mk 7 VW Golf great information worked a treat thank you
Thank you, it really helped
Thank you.
Anytime!
My 2019 Q8 B pillar has an airbag icon at the top. Will removing the panel cause the issues with this airbag? I’m trying to replace the seatbelts.
Disconnect car battery before disconnecting and reconnecting airbag. Otherwise there is no issue from touching it.
nice bro
thx ya, for this video
Thanks ✅
glad it helped!
The removal of the B pillar went perfectly fine based on your tutorial. The problem I am facing now is to fit the pillar again properly in order to allow the seat belt mechanism to slide up down. What is the trick there?
Still you are facing the problem?
@@sobysunny123 I still am yeah
@@xXdeathisanilusionXx is the seatbelt mechanism on the B-pillar trim to bottom limit? Make sure it is
@@xXdeathisanilusionXx Slider is controlled by a plastic part maybe its stuck with some stopper. Its like a guide. If you want more detailed just e-mail me sobzsunny@gmail.com.I can share you teardown images of the Back side of B pillar
Thanks for taking care of it, somehow I missed this comment
How do you remove this piece to replace with a new one? I think the seatbelt is bolted into the floor of the car and attached with a metal rope.
You answered your own question! You need to undo the belt and then replace the panel.
what's the name of the part under the B Pillar. I mean the black part that goes to the door side
Its called lower or bottom B-pillar trim. And the part you see on the video is often called upper or top trim
How can you replace one with a new trim piece? How to remove seatbelt?
for that you need to remove the bottom part too and unscrew the seatbelt
Hello, so you can remove the upper pillar without removing the lower plastic one??
Yep
@@RomanDoes Nice, thanks mate!
I've tried to remove the B pillar trim on a4 B9 following this video but i cannot remove the right bottom edge part no matter what.. the left goes easily off
This is Q5 on the video, A4 might have some additional clips...
@@RomanDoes yeap, i was thinking that q5 is similar to a4.
This is from a4 b9, seems 4 clips too..
images.recar.lt/images/XkVM6XXlNE/800/10010464_2c1c1c22-6745-4d64-a65d-688e291b570b.jpg (8W0867294 & 8w0867244e)
Hi I have a Q2 and want to remove the A pillar trim. I can pop the top open but the second clip wont disengage no matter how hard I pull. And before someone says it there is no "AIRBAG" symbol on it hiding a torque screw like you see in other videos. (there is however an airbag there)
Any help guys would be appreciated.
Hi Ray, can you send me the pic of your A-pillar, I've put dash cam wires on quite a few cars and wonder what yours looks like.
@@RomanDoes email sent
@@RaytheRussian replied 👍
Hi there
Do you know how to remove the plastic cover located on the right side of the grab handle?
You mean A-pillar? What model is your car?
@@RomanDoes I have a 2010 Combi A4. The plastic cover I meant is located on my car just next to the door grab on the backside of the car just on the left side up of the B pillar. Meanwhile I figured it out that it was a torx there that was needed to be removed and then the cover comes loose.
Same process to remove 2017 Q7 C pillar ?
Correct, tried it on 2018 Q7. Just watch out for the vent, pull it out first otherwise you might damage it.
Excellent, thank you. Is the vent removal straightforward?
@@RomanDoes no vent on the c pillar. Also the trim piece is much deeper toward the rear and hard to access. Have you done removed this part before, I don’t want to force or break anything. Thanks!
@@kevinstrawbridge3981 oh wait, you talking about C pillar. Sorry I misread your first message on the go. C pillar is evil. Let me ask you, what are you removing it for? Is it for dashcam wires?
@@RomanDoes Might remove to fix an annoying rattle. I looked at the repair manual and it's several steps that I don't want to attempt.
Thanks!
Do you have any idea how to do the same on an Audi a3 8vs 2017?
I would assume its the same concept there
No money to afford an Audi
you don't need money to take an audi apart 😁
nice bro