How to Make a Carbon Fiber Parts Clone [DIY] (Making Mold & Air Scoop)
HTML-код
- Опубликовано: 5 июн 2024
- #carbonfiber #airscoop #mold
How to Make a Carbon Fiber Parts Clone [DIY] (Making Mold & Air Scoop)
How to Make a Carbon Fiber Parts Replica
Making a Carbon Fiber Parts Clone
Making Fiberglass Mold
How to Make a Carbon Fiber Air Scoop
카본 파츠 복제품 만들기 [DIY] (몰드, 에어스쿱 만들기)
카본 에어스쿱 만들기
유리섬유 몰드 만들기
FRP 몰드 만들기 - Авто/Мото
When the flange broke my jaw dropped, but then that squirrel screamed and I cracked up. Thank you for that great edit. I subbed just for that.
Hello, Buddy!
Thank you.
I'm still studying both carbon and video.
I'm going to make a more fun and informative video.
Stay tuned for my channel.
Thank you for watching.
Your videos are just awesome. I'm a beginner in making carbon fiber parts and your steps influence my works so much.
I love the editing and how you tossing the parts around...shit is funny 😄 great vid
Hello, Buddy!
I will make more fun and useful videos.
Look forward to the next video.
Thank you for watching.
@@ECOLAPStudio Hope You will go viral, You totally deserve it ^^
I just found your channel and I'm really grateful for the content you put out. Very nice editing and formula altogether. What's most import are the steps and details which you didn't skip.
I almost passed out when I saw the vacuum bag. I never knew that existed ! I have so much carbon cloth from failed attempts at making things with no vac ! Thanks !😨
Why did you fail so much
kevin bailey because the vacuum helps tremendously in getting the epoxy to spread into the fiber evenly and helps the fiber conform to the mold ! also leaves a smooth finish rather trying to brush it on and sand it down etc over and over again. some parts just can’t be done without a vac bag !
4:24 has me laughing to tears
your VDOs are so addictive to watch lol been sitting here for hours just going though them. thank you for sharing
I just want to thank you for all of your videos. They are precious resources. I want to launch a car modification atelier and this has helped me very very much.
이게 리얼 카본 제작하는거맞나요? 영상 흥미있게 잘보구잇습니다 차 관련 카본파츠 만드는 영상 많이 올려주시면 좋을거같아요
완전 금손 이시네요. 이런 아이디어와 솜씨에 감탄하고 존경합니다.
감사합니다!
아직 많이 부족하지만 더 열심히 노력할테니 지켜봐주세요!
Nice parts🔥🔥 , learned something outta this video
You. Sir. Have a good sense of humor. Subscribed.
this is the only channel I clicked subscribe on my first watch.
기다리고있었어요❕
기다려주셔서 감사합니다~
금은방이선생 채널 유익한 영상 잘 보고 있습니다!!ㅋㅋ
man i love these channel please do some forged carbon and other patterns
Hello, Buddy!
Ok. I received your requirement.
I know how to make forged carbon fiber.
But now there are many other woks.
If I have a chance, I'll make a video.
Thank you for watching.
Dude you are amazing! I will do the same in my car! Can you please make full carbon bucket seats and outter aero mirrors?
You are making really great job and this is funny. Keep it work
Cool video, that editing is wicked, also very interesting contents
Very nice Channel Dude!
You deserve more subscribers
올려주신 동영상 항상 재미있게 보고 있습니다.
질문 하나 드려도 될까요?
매번 파츠위에 카본을 래핑하는 작업만 하다
이번엔 풀카본을 만들어 보려 합니다.
몰드는 있는데..
위 동영상 처럼 몰드에 릴리즈왁스 바르고
탑코트에폭시 올린뒤 카본을 씌우면 모양이 잡히지 않습니다.
겔코트 작업할때는 2시간 정도 지촉경화 후 작업하면 잘 잡히는데요..
에폭시도 일정 시간 경화후 카본을 올려야 하는지요?
아니면 최초 올릴때는 탑코트 에폭시 같은 제품이 아닌 클리어 겔코트 같은 별도 제품을 써야 하는지요?
Soo cool process - very clean. Thanks!
Inb4 this channel goes to 100K+ subs. Great videos man keep making them
What is the white cloth you used around the blue perforated release film before putting into the vacuum bag ? Also what fibreglass weight cloth do you use ? Keep up the videos !!!
Thanks for sharing knowledge.
Huge respect for you sir
You do really clean work!
It's realy cool and u make it look so easy...I wont to try somthing out on one day by myself,Just as test 1'st on somthing little 2 start...Great video's and how 2,And yeah Extreme Funny how you handle and toss those beautiful Carbon parts around LoL 😁 Grtz from Belgium
❤ Carbon Fibre
Excellent video. Thank you.
Dunno if it's a byproduct of a quiet workshop, but the audio kinda reminds me of those creepy ASMR vids.
Amazing job man, How do you evaluate the quality compared to the original part and overall quality out of 10?
볼때마다 신기해요 🙄 잘보고갑니다!
고맙습니다!!
다음 영상도 기대해주세요!
더더욱 재미있고 즐거운 영상 만들겠습니다~ ^^
Good video
If I may make a suggestion. Make your flanges wider, take more time to make them more smooth. Also make your mold more robust, more bulk up of course. Good job though
I laughed at the gloves breaking, great job!
beutiful and fun video. can i ask how much you wait when you make the mould after the gelcoat? in the video seems that you put gelcoat and after fiberglass and resin
After two vids of this channel. I subs
Excelentes videos! En donde podré encontrar los materiales? Y cómo mezclar las resinas?
7:38 to 7:39, the second when eco knew he fu! lol. Ouch. 4 carbon fiber shards under finger nails. Great vid
Este tío es la ostia, lastima que no haga turoriales explicando todo más, yo no me entero de nada y me gustaría saber hacerlo
Great vid!!
진짜 볼수록 멋져서 구독,좋아요 눌르고갑니다!! 이런제주있으시면 너무좋겠어요! 저도 M오너 인데 진짜 카본제품들 너무비싸서ㅠ
안녕하세요~
정품 카본은 참 무지막지하게 비싸죠ㅠㅠ
근데 막상 작업을 해보면 작업 시간과 난위도를 생각해보면 말도 안되게 비싼 것은 아니라는 생각도 듭니다.
그래도 뭐 비싼건 사실이긴 하죠^^
구독 감사합니다!!
ECO-LAP Studio 맞아요 정성과 시간이 들어가니까요!ㅋㅋ
Great video
Nice job. Fun video.
Good job brother
God bless you
Muito interessante. Me ajudou muito.
If you only had one part and you would like to make a mirrored copy, how would you do it (without a CAD model)?
Стиль съёмки- огонь!
hahahah nice job dude and you make me laugh with the scenario of directing the video hahah ,that is it nice job
Hola una opinion yo uso un velo de superficie primero bien mojado con saca burbujas despues que tira empieso con fibra para garantizar que no te quede aire saludos
😂😂😂😂😂 nice Video with some good laughing Moments for me
Haha oh my God your videos are so nice and funny 😅 extremely good channel. Greetings from Germany!
i like the video simple clears all Thanks
The beaver scream made me laugh so fucking hard.
Awesome work! How much The weight of fiberglass you used?
Can i vacuum withouth the breather and bleeder cloth or any alternatives for that cloth because i cant find it here in my country
If you keep posting carbon fibre stuff, your Chanel will explode and hit 1 mio subs still in this year!
Hello, Buddy!
I appreciate you.
Thank you so much.
I'm going to make a fun and informative video.
Stay tuned to my channel.
Thank you for watching.
Amazing videos~ I have watched all of them :). Would you attempt to make the "Forged Carbon Fiber"? Thank you :) :) much love
Hello, Buddy!
Thanks for the comment.
I know how to make forged carbon fiber.
But now there are many other tasks.
If I have a chance, I'll make a video.
Thank you for watching.
Hello, can you link below where did you buy the plastic bag with valve and the pump to do vacuum? Txs
Where do you get the air bag and other materials like perforated material etc
That was awesome
which is best for use of fiberglass, epoxy resin or polyester resin
Bravo! Trovo il video molto interessante e fa capire quanto la materia sia alla portata di molti ;-)
Yours compared to the originals would've been nice ! But great job, for parts that I'm sure are worth a few hundred $$$.
Nice vid again bud😁
Hello, Buddy!
Thank you for your comment.
Please look forward to the next video.
I'll make an interesting video.
Thank you for watching.
Erstmal Daumen hoch zu deiner Arbeit... Echt gut.
Was mach mal interessieren würde wie man einen stabilen und leichten Splitter bzw. Unterfahrschutz als Sandwich baut.
Im bestenfalls dann um die 10 mm stark.
Gerade für uns im Bereich Rennwagen interessant.
Amusing yet educational
Is there another name for the polyester gel coat? Seems hard to find on eBay ..
Were can I buy the soft yellow wax?
La pregunta es si reciste alta temperatura
Could you please write out a list for the items needed for this, i want to make these fiberglass moulds for lots of other items please
Hello, Buddy!
I will briefly tell you the ingredients you need.
* Making Mold *
Yellow wax
Epoxy gel coat (or polyester gel coat)
Epoxy resin (or polyester resin)
Fiberglass cloth
* Making Parts *
Carbon fiber cloth
Epoxy clear gel coat (can be replaced with epoxy resin)
Epoxy resin
Perforated release film
Vacuum bag and vacuum pump
It is a basic material.
@@ECOLAPStudio Thanks, also when you apply the first gel coat, how long is the wait till you apply fiber glass, and then the epoxy rein and 2nd fiber glass?? What are the wait times please
@@ECOLAPStudio don't forget the release wax.
Thanks for a well thought out video.
Nice your video, always make content a carbon
Sehr geil! Und so einfach, wenn man weiß wie es geht…😉👍👍
Hola,muy buenos videos, pero podrías colocar los materiales q usaste en español en la descripción 😅
Thank you for not talking for 5 hours about what you're doing!
Sei un grande! adoro come li fai venire nonostante non hai attrezzatura professionale e ti vengono benissimo! dove compri i prodotti?
Hello, Buddy!
Thank you for your comment.
I do not make carbon fiber for sale.
I want to share how to make carbon fiber easily and simply with many people.
Thank you for watching.
Tenes que usar cera y agente de despege pba
4:21 is gold
すごいですね!!僕のミニクーパーのパーツも作って欲しいくらいです。
can you provide link to the hand suction pump? and/or the vacuum bag too? Thanks for the great tutorial videos!
Hello, Buddy!
I used vacuum bags and pump for clothing and food.
It will be available to you too.
ECO-LAP Studio gamsahabnida!
How did you polish?
Can you provide a link for the materials you are using
Ciao realizzeresti anche rivestimento per carene moto?
장인지로 파란색은 처음보네요
특별한가요??
안녕하세요!
내용물은 기존의 것과 다르지 않습니다.
그냥 최근에 스티커 색상만 바뀐 것으로 알고 있습니다^^
Your actions speak louder than words !!
¡Hola! me encantan tus videos, gracias por compartir!!! tengo un par de dudas, tu que tipo de fibra de carbono usas? 3k, 6k? estos son los grosores? Muchas gracias.
Hey man , may you make a carbon helmet? Thanks!
Where did you get that wax???
When you use Carbon fiber why it's not get stretched while handling????
작업시 필요란 물품은 어디서 사시나요?
Hast ein Link, wo man sich die benötigten Materialien besorgen kann?
Good video
+Michael Ritchie Hello, Buddy!
Thank you for your comment.
I will make fun and informavite videos.
Please, look forward to next video.
Thank you for watching.
Whats that black fluid?
Where do you buy the wax?
where are you getting that style vaccum bags?
Hello, Buddy!
The vacuum bag is nothing special.
The vacuum bag is for clothes.
I bought it in the online shop in South Korea.
Maybe you can buy it easily in your country.
I hope you helpful.
@@ECOLAPStudio Thanks for the reply seems like a cheap and easy way to level out the resin. When you do have a vaccum set up
@@BisforBoost
Yes, That's exactly right.
When it is vacuumed, unnecessary resin is absorbed by the bleeder breather.
And the carbon fiber cloth is pressed into the mold.
What an awesome chanel, Im dying for new videos, when i first saw it I smashed the subscribe button 😁 some of our friends are waiting you do to a video of small details getting carbon wrapped. We have s lot of problems to lay carbon on fiat 500 abarth buttons on steering wheel because it has 2-3 millimeter of plastic and cant get the hole cut properly on the middle. Any suggestions?
Hello, Buddy!
It is difficult to judge the exact situation.
Can you show me the picture?
Let's solve the problem with me.
I want to help you.
ecolapstudio@gmail.com
Does he always use a brand new package of wax? I don't think I've seen him open a used one...
Bro please provide links of the products 🙏
Ciao, volevo costruire un cofano in carbonio, posso seguire lo stesso procedimento che hai fatto qui?? Grazie mille
Hello, Buddy!
Making a carbon fiber hood is very complex and difficult.
I haven't tried it.
I think it will be similar to the method in this video, but I can't give any exact help.
I am so sorry.
Hey mate, can you link the products you use? Also, have you ever considered selling some stuff? Example phone cases etc..
Hello, Buddy!
I bought epoxy resins on Korean online shop.
However, Korean online shops do not ship overseas.
I'll give you a UK online shop.
You will find what you want.
www.easycomposites.co.uk/
I'm not selling carbon fiber.
I have a different job and want to convey information and fun to many people through video.
Please comment or email me if you have any questions.
Thanks for watching.
ㅋㅋㅋㅋㅋㅋ 재밌다는!!
아니!! 그 유명한 드리프트 히어로!! 카자마 콴님께서 친히 이렇게 댓글까지 달아주시다니!!
가문의 영광입니다!!ㅋㅋ
SEHR geiler Kanal! Ich überlege schon länger, die Motorabdeckung vom N52 325i zu individualisieren. Dachte an lack. Aber das Kohlefaser wäre natürlich ne weitere Ebene! Glasfasermatten und zeug müsste ich noch von ner stoßstangenreparatur haben... Wo bekommt man die Kohlefaserlappen her? Und welche Harze/Hersteller bevorzugst du?
Ansonsten: weiter so! Sehe es mir supergerne an!
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
www.easycomposites.co.uk/
Mhh. Warum Schimmel? Oder ist das gemeint wie eine "Dachschimmel"? Wie immer Top Videos. Großes Lob für den Inhalt und die Art der Präsentation. Einfach eine Freude dabei zu zuschauen. Schon mal dran gedacht was in Richtung Sim Racing zu machen? Hab gesehen du hast ja schon ein nettes kleines Rig. ;-) Besten Gruß und weiter so!
which resin are u using ?
no wax or with wax?
Hello, Friend.
I used laminating epoxy resin when laminate the carbon fiber cloths.
Release agent such as wax or PVA is required for demold.