It is wonderful to see the support and to hear of more than 5+ yr survivors (I know you know what that means to us survivors)!I am at 4 yrs and 4 months after my 5 months of 3 different chemo medications 🤭 so I am a little more nervous again bc the 5 yr mark is approaching,,,, but as always we have to try our best to stay positive. Again, I am so happy for your 16 yr blessed journey. 😍😍😍😍
@@virginiarector4376I am approaching my 5 year mark of surviving breast cancer. If you know you know. I know and thank you for your Breast Cancer Awareness.❤
I did mine at 370 for 120 degrees with no rotating and I place my full wrap just above the bottom to reduce the ghosting. Since I started doing that, I've had no ghosting on any of my tumblers :)
I just ran across your video after ordering mine a few hours ago. Makes me a smidge nervous about the ghosting but girl if you can possibly do an update when you try again for possible tips to do, I would greatly appreciated it!! Btw, fell in love with your personality and content, & will definitely be a continued follower! Thank you for doing this!! God Bless you!
I pressed mine successfully using 370 for 240 seconds without rotating the tumbler. Also, I have my paper size longer than the tumbler allowing the paper to overhang the top and bottom. I did tape around the top and the bottom very tightly to act as a band. So far I have no ghosting.
I watched another video earlier and the lady had Go sing as well on her Tumblr. Using the same machine. And what she did was she did not cut the paper down to size and said she let it overhang on the bottom and on the top and she taped it really good and that was the only way she was able to get rid of the ghosting....
I ordered mine, it is supposed to arrive Friday. I can hardly wait! I saw other crafters using the same press & not turning their tumblers & just placing butcher paper loosely with no tape after taping their design on. The tumblers came out perfect, with no ghosting. They also used full bleed on their designs. No criticism intended, just sharing what I saw. Thank you so much for sharing this.
Yeah I heard from someone else. But, all the ones I saw were not full wraps. But it’s all good. Appreciate the feedback I’m gonna try it again. I know someone who couldn’t get it to work either. But HTVront did a full wrap on a small tumbler and rotated it. It depends on the the width
Girl HTVRONT did a presale!!!!! 🙌🏾🙌🏾🙌🏾🙌🏾 I couldn’t wait for amazon to drop! I’m sooooo excited as well! Got the heat press when that came out too! Letssssss gooooooo! Thank you for what you do for us! Continual Blessings ❤
Got mine I used your link it was more than 199. I was praying it would drop on Amazon and it did. I'm so happy you dropped the blessing in the video. Thank You...
@@SametraKnight777 appreciate it. I think the more people started buying they raised the price I don’t know. Crazy. Right after I did the video I saw it for $209 at one point. Glad you were able to get it.
I usually leave a small gap at the bottom so my paper doe not fold over the edge. I use an oven now with silicone bands at top and bottom. Will be interesting to see how this does without the bands :-) Beautiful colors!
Thank you for your honest review. I had trouble with my tape burning onto the glass tumblers. I think I am returning because there is no way to adjust the pressure.
That's how I feel about the HTVront heat press. & I have seen a lot of complaints about there isnt enough pressure (esp with DTF prints). I wasted several prints/shirts & when I thought it was going to be good, I had to replace customers shirts after they washed them. Absolutely so disappointed. I still with my oven for my tumblers and my cheap amazon heat press that I purchased over 3 yrs ago. Thank you for a great video and information.
You gotta go with what works for you. So sorry about that. But I have never replaced a shirt after a customer wore it and washed it. That’s weird. Who is to say they washed it right? I hope they sent you pictures.
Im starting my own little business and I got mine over a month ago.. Still haven't used it since i've been so nervous about starting, I've been petrified to mess up which I know is inevitable.. watching your videos and other channels I'm feeling a bit more confident now:) I'm definitely going to try doing my first tumbler sublimation tomorrow :) wish me luck!!!! THANK YOU!!
Thank You!!! I've actually been doing so well.. I'm very much shocked but ver proud of my self.. As a beginner ive had only 3 tumblers which had ghosting and a bit of the seam.. definitely RUclips videos have helped me get it together and creating less ghosting and no seam... I'm feeling so confident I've actually sold 7 cups thus far and very much proud on the outcome!! @@katrinasgracefulcreations3711
not sure if this will be helpful to you but i dont get ghosting on my tumblers at anymore what i started doing is using card stock from walmart and setting my htvront to 385 and time to 185 and making sure my designs are wrapped so there is n o extras on top or botton wrap it with cardstock and pop it in and they come out perfect for me every time
So I just bought this too. Totally from influence because I have a Circuit Press but this one can do tumblers so I though it was worth the buy. Can’t wait till it gets here to use it. QUESTION: how do you seal the tumblers after you sublimate them or do you even have to seal the design? If you have a vid on that I will try to find it.
Katrina, Katrina, Katrina!! Let me start off by saying that your design is Beautiful! See, this is why I appreciate you so much because you show the good, the bad, and the ugly! I'm sort of kind of disappointed because I was hoping that we finally had an auto tumbler press so that we didn't have to do anymore twisting and turning any knobs for the correct pressure for a quick 1 or 2 tumbler job but I guess the sublimation oven or continuously using the manual tumbler presses are going to be the best options at this point. 😞 I think this press is probably only good for mugs rather it be 1 or 2 at the same time. And thank you for showing us that mugs can also fit as well!👍🏽😉💝
Thanks for the feedback. I have to do it again. Some keep saying they saw people do it without rotating or. It there was a gap in mines and every rumbler isn’t the same size. The people I saw do it they had a small seem in theirs. Even when HTVRONT did it they rotated it. I don’t mind that at all. I just don’t want any ghosting. So I will be doing it again. Thanks though.
Who because I saw other videos. They either didn’t do a full bleed or there was a small seem left out. I watch HTVRONT’s videos and they rotated it always. I showed the gap in my tumbler. Every width of every tumbler is not the same size.
I would love to start making tumblers and mugs with design. Do I need a sublimation printer or can I use a normal printer? Also, do you have suggestions on where I can purchase the mugs?
I trust your opinion, i finally ordered mine it came yesterday i came back here to watch again before using it. Im tired of burning myself in that toaster oven 😂😂😂 and i got it new for $120 on mecari free shipping
Challenge for you can you do an enamel camping mug the ones with a rim seems not to give them enough pressure unless it's me .. thanks Katrina 🙏 love your videos
I just got mines a few days ago I know I'm extremely late lol but this is what happened to me with this tumbler press I mess up 6 tumblers lol I'm going to try to make the print longer on the top and bottom and not tape and see what happens if the same I'm returning
I should of explained better, my apologies. After wrapping the tumbler and shrink wrap then put butcher paper on. Then put into the press. I apologize again.💐
There is no need for shrink sleeve bags in a tumbler press it's only mainly used for a sublimation oven because there is no pressure. Not required for a press...just butcher paper.
Hi Katrina, may I ask what Epson printer you printed those images from? I have the Epson SureColor F170. I would love to be able to print larger! Thanks!
Does the htvront work good I am first timer and I am trying to decide I want that Tumblr heat press, so is it worth fine? I already know I’m getting the heat press for that brand. I want to know about the Tumblr press please comment back. Thank you.
I am very OCD about my taping method but still end up with inconsistent results using this press. Same designs end up hit and miss on their HTVRont 20 oz tumblers. Some end up with faded areas - not ghosting. I flip end for end and rotate 180° but still inconsistent results no matter what time and temperature combination.
@katrinasgracefulcreations3711 blessings Katrina I'm awaiting my oven. However, I want to do the infusable ink hack, and from what I came across from 1 person is with this method I'd definitely need a tumbler press vs the oven. Would you mind providing your input ?
how long and what tempdid you use? also you never had to turn it around? can you post a picture of the one you did not turn. thanks@@katrinasgracefulcreations3711
I got the auto heat press during prime days, but I didn’t see this. It’s $239.99 now. 😢 I’m gonna keep watching it though. So far I love all the HTVRont products I’ve used.
Hi Katrina! still love the mug and cup you did.😊I've been kinda collecting different machinery here and there but have not used them yet. I want lie, I'm not computer savvy at all, but i have a question for you. Like when you buy your different machinery, do you figure out how to use it yourself because when I see you tubers doing the mugs etc. I feel a little intimendated but i guess that's because I have not actually used my stuff yet, My nephew is gonna help me but I still need to know for myself, if this makes sense.
Yes I read the manuals like you see me do on my videos. But when you know one machine you know them all. Heat presses are easy to use right out the box. It’s just the times and temps and that’s what our RUclips videos and the manuals are for. But the best way to learn is by practice
Thank you for the info. I am waiting on my press to arrive today. Your video was very informative. One thing that I did notice was the ghosting on the top and bottom. Have you come up with any remedies for the ghosting? I plan to use my press to sell tumblers and want to provide a good product. Any help will be greatly appreciated. Thank you in advance for your response.
Hi, if I was to make a full wrap on the mug, does this heat press able to press heat right up to the edge of the mug handle? My print comes faded as it gets close to the handle with my current mug press.
Thank you for representing breast cancer month. I am a 16 year survivor. God bless you.
Praises💕💕
It is wonderful to see the support and to hear of more than 5+ yr survivors (I know you know what that means to us survivors)!I am at 4 yrs and 4 months after my 5 months of 3 different chemo medications 🤭 so I am a little more nervous again bc the 5 yr mark is approaching,,,, but as always we have to try our best to stay positive. Again, I am so happy for your 16 yr blessed journey. 😍😍😍😍
@@virginiarector4376I am approaching my 5 year mark of surviving breast cancer. If you know you know. I know and thank you for your Breast Cancer Awareness.❤
I did mine at 370 for 120 degrees with no rotating and I place my full wrap just above the bottom to reduce the ghosting. Since I started doing that, I've had no ghosting on any of my tumblers :)
Ok I’m gonna try it again.
can you show us the update please?@@katrinasgracefulcreations3711
What do you mean ‘above the bottom’ please?
That's what I do. I have the print a little longer at the bottom and do not tape. When I use tape it makes it worse.
My name is Denise you just have to figure out your pressure they're beautiful and I like the one for cancer
I just ran across your video after ordering mine a few hours ago. Makes me a smidge nervous about the ghosting but girl if you can possibly do an update when you try again for possible tips to do, I would greatly appreciated it!! Btw, fell in love with your personality and content, & will definitely be a continued follower! Thank you for doing this!! God Bless you!
I pressed mine successfully using 370 for 240 seconds without rotating the tumbler. Also, I have my paper size longer than the tumbler allowing the paper to overhang the top and bottom. I did tape around the top and the bottom very tightly to act as a band. So far I have no ghosting.
Awesome
I watched another video earlier and the lady had Go sing as well on her Tumblr. Using the same machine. And what she did was she did not cut the paper down to size and said she let it overhang on the bottom and on the top and she taped it really good and that was the only way she was able to get rid of the ghosting....
Hi do you mind sharing the video with me I have this press and I’m have the same issue thanks
I ordered mine, it is supposed to arrive Friday. I can hardly wait! I saw other crafters using the same press & not turning their tumblers & just placing butcher paper loosely with no tape after taping their design on. The tumblers came out perfect, with no ghosting. They also used full bleed on their designs. No criticism intended, just sharing what I saw. Thank you so much for sharing this.
Yeah I heard from someone else. But, all the ones I saw were not full wraps. But it’s all good. Appreciate the feedback I’m gonna try it again. I know someone who couldn’t get it to work either. But HTVront did a full wrap on a small tumbler and rotated it. It depends on the the width
Girl HTVRONT did a presale!!!!! 🙌🏾🙌🏾🙌🏾🙌🏾 I couldn’t wait for amazon to drop! I’m sooooo excited as well! Got the heat press when that came out too! Letssssss gooooooo! Thank you for what you do for us! Continual Blessings ❤
Yeah I was so busy and went away my video was late. Lol
Got mine I used your link it was more than 199. I was praying it would drop on Amazon and it did. I'm so happy you dropped the blessing in the video. Thank You...
@@SametraKnight777 appreciate it. I think the more people started buying they raised the price I don’t know. Crazy. Right after I did the video I saw it for $209 at one point. Glad you were able to get it.
The HTVRONT auto tumbler heat press really helps craft lovers a lot! really love it!
Thank you for your honest opinion. I was debating on getting one but I think I will stick with my oven. I appreciate you!
You’re very welcome I love my oven too.
New subi here. I love your energy and your “we gonna do it again” attitude
I ❤ your personality. May God continue to bless you abundantly
Thank you much. Likewise
I really enjoy watching your videos, your very professional, I love your setup, I had my business for 14 years and I love your presentation ❤❤❤
This look like game changer mugs and tumblers!!!! Thank you for sharing. Hope to be making some soon myself!!!!
I usually leave a small gap at the bottom so my paper doe not fold over the edge. I use an oven now with silicone bands at top and bottom. Will be interesting to see how this does without the bands :-) Beautiful colors!
Thank you for your honest review. I had trouble with my tape burning onto the glass tumblers. I think I am returning because there is no way to adjust the pressure.
Sorry it didn’t work for you. Did you try other mugs or tumblers as well?
👋🏾
Are you using heat resistant tape?
Great to see you Katrina. Always with the new new.
Always trying to come through for you guys.
Thank you Katrina for the video. I think I’m just going to purchase the PYD Sublimation oven.
Excellent choice
That's how I feel about the HTVront heat press. & I have seen a lot of complaints about there isnt enough pressure (esp with DTF prints). I wasted several prints/shirts & when I thought it was going to be good, I had to replace customers shirts after they washed them. Absolutely so disappointed. I still with my oven for my tumblers and my cheap amazon heat press that I purchased over 3 yrs ago. Thank you for a great video and information.
You gotta go with what works for you. So sorry about that. But I have never replaced a shirt after a customer wore it and washed it. That’s weird. Who is to say they washed it right? I hope they sent you pictures.
Hey Katrina happy Tuesday and here watching.
Hello and thank you
Got a mug press for doing coffee mugs. They come out prefect every time. Pioneer works is the mug press we use.
Great! How do you keep the tape from burning?
I ordered the tumbler press!!!!!
Im starting my own little business and I got mine over a month ago.. Still haven't used it since i've been so nervous about starting, I've been petrified to mess up which I know is inevitable.. watching your videos and other channels I'm feeling a bit more confident now:) I'm definitely going to try doing my first tumbler sublimation tomorrow :) wish me luck!!!! THANK YOU!!
You got this. Wishing you all the best
Thank You!!! I've actually been doing so well.. I'm very much shocked but ver proud of my self.. As a beginner ive had only 3 tumblers which had ghosting and a bit of the seam.. definitely RUclips videos have helped me get it together and creating less ghosting and no seam... I'm feeling so confident I've actually sold 7 cups thus far and very much proud on the outcome!! @@katrinasgracefulcreations3711
not sure if this will be helpful to you but i dont get ghosting on my tumblers at anymore what i started doing is using card stock from walmart and setting my htvront to 385 and time to 185 and making sure my designs are wrapped so there is n o extras on top or botton wrap it with cardstock and pop it in and they come out perfect for me every time
Very beautiful mug and bottle you made. I really love the design and thanks for sharing.
Thanks so much 😊
New subs😮😊I was saying I finna start doing this and your video popped up after I was watching something else 😮😊and you show how to do everything 👍🏾❤
Welcome to the channel ❤
Hey Katrina, maybe try a shrink wrap sleeve on the tumbler? I love the idea so i may try it. Thanks for the video.
The shrink sleeves are really for a oven in my opinion. there is no need in a press. The pressure is still the same
So I just bought this too. Totally from influence because I have a Circuit Press but this one can do tumblers so I though it was worth the buy. Can’t wait till it gets here to use it. QUESTION: how do you seal the tumblers after you sublimate them or do you even have to seal the design? If you have a vid on that I will try to find it.
Katrina, Katrina, Katrina!!
Let me start off by saying that your design is Beautiful!
See, this is why I appreciate you so much because you show the good, the bad, and the ugly!
I'm sort of kind of disappointed because I was hoping that we finally had an auto tumbler press so that we didn't have to do anymore twisting and turning any knobs for the correct pressure for a quick 1 or 2 tumbler job but I guess the sublimation oven or continuously using the manual tumbler presses are going to be the best options at this point. 😞
I think this press is probably only good for mugs rather it be 1 or 2 at the same time.
And thank you for showing us that mugs can also fit as well!👍🏽😉💝
Thanks for the feedback. I have to do it again. Some keep saying they saw people do it without rotating or. It there was a gap in mines and every rumbler isn’t the same size. The people I saw do it they had a small seem in theirs. Even when HTVRONT did it they rotated it. I don’t mind that at all. I just don’t want any ghosting. So I will be doing it again. Thanks though.
@@katrinasgracefulcreations3711 You just might have a defective tumbler press.
I don't know how you ended up with ghosting, but I saw others do it with a 20 oz tumbler without rotating, and it turned out fine.
Who because I saw other videos. They either didn’t do a full bleed or there was a small seem left out. I watch HTVRONT’s videos and they rotated it always. I showed the gap in my tumbler. Every width of every tumbler is not the same size.
Hi Katrina! You don’t actually have to rotate the tumbler. I just got my unit and the first one I tried I didn’t rotate and it came out beautifully.
How long and what time? I did 370 for 120scs twice😂😂. I can’t stop rotating. But the ghosting was gone and tumbler perfect.
@@NxtLevelidl I bumped it up to 385 for 240 secs. I’ve only done 1 but I did get ghosting at top & bottom.
In their official video and their docs, HTVRont advises rotation at 120 seconds.
I got mine from Wal-Mart online last week !! love it...using it as my 2nd tumbler heat press
Oh ok cool I didn’t even know Walmart had them.
Do you prefer this machine or the oven? Do you prefer hippo over cosmos?
I would love to start making tumblers and mugs with design. Do I need a sublimation printer or can I use a normal printer? Also, do you have suggestions on where I can purchase the mugs?
Hi Katrina, very nice as always.
Thank you! 😊
I trust your opinion, i finally ordered mine it came yesterday i came back here to watch again before using it. Im tired of burning myself in that toaster oven 😂😂😂 and i got it new for $120 on mecari free shipping
You’re burning yourself with the oven? Use gloves for protection
@@katrinasgracefulcreations3711 I do I burnt my arms. Reaching in to get them out
Thank you for the sharing! Really love it!
I use shrink wrap after taping too
I usually dunk my mugs in cool water after I take it out of the press
Challenge for you can you do an enamel camping mug the ones with a rim seems not to give them enough pressure unless it's me .. thanks Katrina 🙏 love your videos
I fixed my ghosting!!!🎉❤😊 I’m soooo happy…..
Awesome
How did you fix it?
@@NailsbyAmbie 370 at 120 twice rotated after 120. I’m not sure if you need the full 120 but at 60 I had the ghosting.
@@NailsbyAmbiewhat did you do?
Thank you so much Katrina!!!
385 temp 120 rotating then another 120. Perfect or you can shrink wrap to stop the ghosting same temp. The temp needs to be higher for sub to work.
I just got mines a few days ago I know I'm extremely late lol but this is what happened to me with this tumbler press I mess up 6 tumblers lol I'm going to try to make the print longer on the top and bottom and not tape and see what happens if the same I'm returning
Katrina . can you do this without sublimation ,I use brothers canvas workspace . ? with htv
Great video! Keep up the good work!👍
Thanks! Will do!
Thank you for demo. Why not try shrink wrap to see if that works on the tumbler. Have a wonderful day.
The shrink wrap can't go into the tumbler press
From my experience, shrink wrap leaves a mess in the tumbler press. Butcher paper is better.
I should of explained better, my apologies. After wrapping the tumbler and shrink wrap then put butcher paper on. Then put into the press. I apologize again.💐
There is no need for shrink sleeve bags in a tumbler press it's only mainly used for a sublimation oven because there is no pressure. Not required for a press...just butcher paper.
@@Melkeller3628do you shrink wrap with your press machine
btw love your videos so fun to watch
I a beginner what should I start with. Whats the best temperature to use.
Hi Katrina, may I ask what Epson printer you printed those images from?
I have the Epson SureColor F170. I would love to be able to print larger! Thanks!
You have to do a full bleed at the top and bottom for the tumbler.
Awww I did
Awesomeness, question please, where did you purchase the gray mat, after you taken the hot the mugs out ?
Oh those mats came with the small cricket and my other manual press
Awesome 🤩 stay blessed love 🥰
Thank you! You too!
Does the htvront work good I am first timer and I am trying to decide I want that Tumblr heat press, so is it worth fine? I already know I’m getting the heat press for that brand. I want to know about the Tumblr press please comment back. Thank you.
I used blue painters tape top and bottom
I should have taped the top as well but I never do
Were you able to press one without ghosting?
I am very OCD about my taping method but still end up with inconsistent results using this press. Same designs end up hit and miss on their HTVRont 20 oz tumblers. Some end up with faded areas - not ghosting. I flip end for end and rotate 180° but still inconsistent results no matter what time and temperature combination.
I saw people with this same auto press that sublimate tumbler for 120 seconds without rotating. Maybe yours came damage?
My friend said she had to send hers back so I will have to check mines again to be sure
❤what tumblr do you use for your heat press machine patty in Westminster md
Beautiful! ....I just wish it wasn't so expensive.
I just got mine for $179 with free shipping. It was a little cheaper since it was the white one. The other colors were a little more expensive.
What kind of paper did she use there to print the images?
I agree with the colours nice tho x❤
I'm so jealous Katrina. I tried to get one and they were sold out.😢😢😢
Someone just told me they got it. Keep checking. 🤞🏽
Love your energy!
Thank you 😊
Good video thanks looks good I don’t like heat presses that you can’t adjust the pressure
Yeah I prefer controlling my own pressure as well
@katrinasgracefulcreations3711 blessings Katrina I'm awaiting my oven. However, I want to do the infusable ink hack, and from what I came across from 1 person is with this method I'd definitely need a tumbler press vs the oven. Would you mind providing your input ?
Thank you, Katrina!
I have done two tumblers, and both have ghosted. I have no problems using a convection oven. I am not happy with this machine it has to go back.
Thank you! Mine just came today!
I did not have to rotate mine at all came out great no ghosting at all
Really? In the same press. You have this one already?
how long and what tempdid you use? also you never had to turn it around? can you post a picture of the one you did not turn. thanks@@katrinasgracefulcreations3711
What site/app do you use to edit measurements for your projects?
Would the flat bottom instead of a rounded bottom would work better with the HTV ront tumbler press
Can it do tapered tumblers also?🤔
I got the auto heat press during prime days, but I didn’t see this. It’s $239.99 now. 😢 I’m gonna keep watching it though. So far I love all the HTVRont products I’ve used.
Yes the price went up guessing this is the regular price. Not sure
Hi Katrina! still love the mug and cup you did.😊I've been kinda collecting different machinery here and there but have not used them yet. I want lie, I'm not computer savvy at all, but i have a question for you. Like when you buy your different machinery, do you figure out how to use it yourself because when I see you tubers doing the mugs etc. I feel a little intimendated but i guess that's because I have not actually used my stuff yet, My nephew is gonna help me but I still need to know for myself, if this makes sense.
Yes I read the manuals like you see me do on my videos. But when you know one machine you know them all. Heat presses are easy to use right out the box. It’s just the times and temps and that’s what our RUclips videos and the manuals are for. But the best way to learn is by practice
thank you.@@katrinasgracefulcreations3711
Hello, so you don't have to adjust the pressure at all on this??
@@craftydc no you can’t it’s auto
May I ask what’s your measurement for your tumbler on your Cricut explorer, mines doesn’t come out right, thank you Katrina you’re the best 👍🏽👍🏽👍🏽👍🏽
Huh? I don’t have a cricut explorer. The measurements are the same. I showed it in the video
what software do you use to design and print please.
Where did you buy your printer 🖨️ at please let me know where you got it patty’s in Westminster md l have a small business making shirts 👚 and stuff
Thank you, also can you tell me what is the name of the print that you used on the tumbler
It’s in the description box
can you do two mugs at a time with the exact same dimensions?
Hello, you mentioned that you have a six color printer. What other colors do you have, and does it make a difference?
It’s shown in many videos. ruclips.net/video/Wn6zH4PDH9A/видео.htmlsi=pBxPnWxTfkc4G33s
@katrinasgracefulcreations3711 Thank you, you are amazing. I wanted to get the 8500, but it has the additional tank.
What's the size of the tumbler wrap
Hi can you do other tumbler sizes like a 15oz cup
I gave the measurements in the video of the sizes for the width
I saw another video saying it can't do 15oz so I was confused by that
It can go up to 30 oz skinny straight tumblers according to manufacturer
I heard the cricut mugs don't fit in it very well but that other brands do
You think the hippo ink better the cosmo
They are both great
Yesssssss baby. It’s cute
what kind printer do you use?
I ordered mine on Ebay
Thank you for the info. I am waiting on my press to arrive today. Your video was very informative. One thing that I did notice was the ghosting on the top and bottom. Have you come up with any remedies for the ghosting? I plan to use my press to sell tumblers and want to provide a good product. Any help will be greatly appreciated. Thank you in advance for your response.
Are these prints still available
What mugs are you using?
Question.. can you sublimate over an original design with a darker colour? Eg. the tumbler design put over the defectected mug design?
I saw someone do a tumbler but, they didn't have to rotate it.
Hey Katrina, how about if you use shrink wrap on the tumbler to try and prevent ghosting?
There's no need for shrink sleeves in a press
How much for the printer
I started yesterday and I feel defeated already. I have done 4 tumblers and I cannot seem to get rid of the ghosting.
This is for sublimation printer only correct?
You have to have a sublimation printer and ink yes to use this tumbler press
Hi, if I was to make a full wrap on the mug, does this heat press able to press heat right up to the edge of the mug handle? My print comes faded as it gets close to the handle with my current mug press.
It doesn’t you have to leave like 1” to 1”1/2 for full wrap I use my toaster over with a silicone sleeve
With the HTVRont I always get ghosting on my sippy cups no matter how tight I wrap and tape.
All over or just at the bottom? Try another press to see if you get better results this is not the best press for full wraps
Question: can we use heat wrap on this one? The one We use when we sublimate in the oven?
You can if you want but I never have in a mug press
Hi does this new tumbler do the mugs that are small on bottom and larger on the top?
I don’t think so due to the inconsistency heat and pressure it won’t be even through the mug
what ink for the printer?
It beautiful