Это видео недоступно.
Сожалеем об этом.
NEW Glock Micro Roni X Gen 4 Stabilizer Desktop Review
HTML-код
- Опубликовано: 16 авг 2024
- You can support this channel here: amzn.to/2eyc1ya
In this video I go over a desktop review of the new Micro RONI X Stabilizer Gen 4 conversion kit for the Glock 17. Per YRSInc, the redesign of the Micro RONI X Stabilizer Gen 4 allows this one device to fit not only the Glock 17, but all the following Glock pistols:
• Compact Glock 19 - 9x19mm, Glock 23 - .40 S&W & Glock 32 -- 357 SIG - .40 S&W
• Full Size Glock 17 - 9x19mm, Glock 22 - .40 S&W & Glock 31 -- 357 SIG - .40 S&W
• Glock 19X Gen 5
• Compatible with TRUGLO® TFX
Micro RONI Gen 4 is also available for the following Pistols:
• Micro Roni for Glock 20, 21
• Micro Roni for Glock 26, 27
• Micro Roni for Beretta APX
• Micro Roni for CZ P07 and CZ P09
• Micro Roni for CZ P10C
** Does not fit any Glock RTF with "Fish Gills"
*** Not compatible with Glock 17 / 19 GEN 1 & 2!
**** Not compatible with compensated "C" models!
And right from YRSInc website:
You've heard of the Glock Carbine Conversion Kit called Micro Roni Stab, people have said that it is one of the best upgrades for your Glock, and now you are interested in getting more information about it, to understand what does it do and how does it helps you with using your Glock? Well, my friend, you came to the right place! here you can find all the information about the Glock Carbine Conversion Kit from CAA Gear Up - the Micro Roni Stab for Glock 17,22,31.
The Micro Roni Stab for Glock Conversion Kit is a great option to use if you want to be better with your self-defense skills, it can be used in various positions and in a perfectly convenient way!
If you are looking to upgrade your Glock to be more than just a pistol, the micro Roni stab is the perfect fit, it is fast transforming and it gives a lot of advantages that are described below!
With the Glock Carbine Conversion Kit, you can use your pistol and feel like you are holding a rifle with benefits.
Here is the description of all of the features and a warranty that comes with it:
•Equipped with a right-folding stabilizing brace, instead of the original folding stock.
•Brace is firmly fastened on user’s forearm with an adjustable nylon strap.
•Provides stability and enhances performance during single-handed shooting.
•No pistol disassembly required - Just drop it into the kit and lock within seconds.
•Long Picattiny rail - Allows combining two devices (i.e. red-dot, magnifier or NVG).
•Two extra right and left Picattiny rails for mounting additional accessories.
•Ambidextrous, easy and fast cocking handle.
•Ambidextrous trigger-guard safety.
•Right and left serrated thumb-rests for better control on recoil and muzzle rise.
•Front integral tactical light (Optional).
•A right-folding stock for easy concealment and carry, yet the pistol can be operated (grip, cock, and shoot).•Mill Standard! 10 Years Warranty! Pat-Pending! No Gunsmith Required!
New, Micro Roni X Stab Gen 4 Features:
•All Gen 3 Features.
•Captive Charging Handle - In the other versions, the charging handle could be pulled out with the gun. CAA has received many complains about it and decided to upgrade the kit so the charging handle is locked inside. The charging handle won't fall again.
•Larger and flared ejection port - allows better ejection, especially of weaker ammunition.
•Open hatch with access to the pistol's slide-stop.
•New triangular-shaped barrel shroud - Allows the mounting of CAA "Plus" muzzle accessories: MR-CMP (compensator) and PMD (serves as a flash suppressor, a close-combat tool, and a standard window-breaker).
•An extended brace which allows a better holding of the Micro Roni. This too, was changed due to many customer requests.
•Gun Compatibility: the generation four of the Micro Roni is compatible with generation 5 Glocks and Glock 19X. In addition, the previous versions supported Glock 17 or Glock 19 while the Generation 4 supports both of them.
•Interchangeable front grip which allows you to hold an angled grip (stab version) or mag holder (regular version). CAA may add additional accessories that will connect to the button rail and provide you with additional functionality.
Also, YRSInc has (at the time this video was uploaded) a launch price for the Micro RONI X Stabilizer Gen 4 of $249 vs. $299 MSRP.
Accessories for this:
www.yrsinc.com...
www.yrsinc.com...
Thanks for watching and be sure to subscribe. If there's something you'd like to see, let me know. If I can make it happen I will.
The forward "trigger guard, spare magazine holder" is mislabeled as a "forward grip". The forward "non-feature" would be part of the trigger guard. It is not a standalone feature as putting your thumb around it is unnatural at best, and at worst, would fill the trigger guard with your off thumb in addition to your index finger. That's why the ATF are not a bunch of idiots. They would never call this a forward hand grip. As for California, they should in fact demand that these non-features be added to such accessories to encourage their use, and to save a perp from the argument who wouldn't use this thing anyways, from the argument, that a shooting was an accident, from the inaccuracy of shooting such a thing ONE-HANDED.
The lack of verticality (90-degrees) would be irrelevant, which it is by the way, angled (and to a very eaily measured degree. This is why that additional piece would not make this an AOW, and that is why all the other products like this are already deemed to be non-AOW, non-NFA accessories.
Thank you. I was debating getting this if I had to register it as an aow because of the mag holder. Guess I'm free to get one without the bullshit paperwork and stamp. Once again. Thank you
So glad you mentioned about the Truglo TFX, i bought it and freaked out cause other vids of older model micro ronis say you cant run Truglos. I got about 2 weeks till my micro roni arrives
Just ordered mine for the APX full size, can't wait, thanks for the video!
Thanks for watching. I'm sure you'll enjoy. Let me know your thoughts once you've run some rounds through it.
@@PacificTacWest I certainly will, Thank you for your message, "Long Live The Republic".
"A subsidiary they are not affiliated with". Whaddey-wut-wut? I bought one myself for my G22 from Israel and can't wait to play with it. Great breakdown!
Thanks for watching. Let me know your thoughts once you've had a chance to shoot yours.
Very well presented and articulated!
Thanks for the clarification on the MCK.
You're welcome. Thanks for watching.
The absolute best Micro Roni vid I've found thank you! Your explanation of the Roni X vs. MCK helped me a lot.
Thanks for watching. Happy to help.
Hypothetically speaking, what might happen if I just so happened to trip... fall... and accidentally install the fore grip/mag caddy? Also does the mag caddy come with? Asking for a friend.
Thanks for watching. ATF finds out...likely not end well. Mag caddy came with one I recieved. Hope this helps. Let me know if you have any follow up questions.
@@PacificTacWest I do have one more question. Wouldn't the mag caddy be legal since it isn't a 90° angled grip?
When I asked NFA branch they said it would consider it foregrip.
How is that the same size? Its not excluding the brace theyre not the same lenght. X is longer and bigger
nor cal here, the future state of Jefferson! Good vid..
Thanks...and thanks for watching.
If you have a glock with a stamp i suggest trying the new Fab defense cobra glock stock. I sold my micro roni gen 3 because it baked my slide and would get ridiculously dirty with only 50 rounds through it. I sold mine and went with the stock and vfg. This is half the weight of the Roni, and with a red dot it is a very accurate effective system when shooting on the move .
Thanks for the recommend.
The concept is great, unfortunately the execution still requires some work. The largest issue is that the charging handle fails to consistently grip the slide on my Glock gen 3 strong enough to allow it to chamber the first round of a new magazine (even with their latest version). The first time I shot one at the range was outdoors on a hot day. Whether due to the temperature combined with the plastic materials used, or some defect in the unit, the charging handle kept slipping over the slide, and would fail to chamber every time. It simply was not strong enough to 'grip' the slide in the right grooves. This is an issue I have read others having as well, but was hoping had been resolved through the newly designed handle with Gen 4. Makes me wonder whether they should not have considered a different material for that charging handle besides plastic, which quickly wears over repeated use. Otherwise, it is still an excellent concept, but there is ample room for improvement (I also had issues installing the sling, but these were resolved through their CS team). Some will reply that you don't need to even use the charging handle, now that the slide release is accessible through the opening- fair enough, but when you spend this much money you want the product to work as advertised.
Thanks for watching. Sorry your experience with this was what you described. Having shot the majority of the RONI product line I haven't had any issues with the charging handle or failure to fire/load rounds even when shooting in heat or humidity (aside from issues with budget ammo).
I’ve only tried mine once G23 Gen3 and experienced the same issue. Next time I’m also going to ensure proper seating of the rear-bottom locking mechanism as I’ve heard someone say that was it fixed their issue
FYI, I purchased my MIC-RONI G4 about two years ago so maybe a correction was made to the charging handle by now
I like that the rails accept slices of american cheese.. Everyone loves micro roni and cheese.
No
Will it fit with the Night Fision optic ready sights? They aren't quite as tall as suppressor sights but taller than normal
Can you remove the barrel shroud to use a suppressor?
Hallo I need one help,I have Glock 17 Gen5 MOS system, did my glock fit's in Micro Roni G4X?This is Glock with red dot cut up (modular optic system)
I don’t think that’s right.. I don’t believe ATF considers that a forward grip.. similarly they don’t view a pistol brace as a stock even though it looks like one. Anyone who knows for sure feel free to correct me
darwin5763 it's an "integrated angled fore grip" if it has the brace then you can have the extra mag piece on there and it's still a pistol. At least in Kansas where i live
My understanding is that a 90 degree vertical grip on a pistol is illegal. This is not 90 degrees so I think this extra mag grip is legal but use your discretion. I also had a friend in the gun industry confirm this to be true
On the CAA SITE I see they now sell a model for suppressor sights and a can
Ive been looking for a video for this particular model Roni. I purchased one from Botach for $149 (what a steal!) but havent recieved it yet, due to backorder.
Thanks for watching. Good deal. Hope they deliver. YRS Inc has them available.
@@PacificTacWest I just bought one from YRS.
Nice. Thanks for watching. Let me know your thoughts.
You stated that CAA calls the MCK a counterfeit, but why does CAA, as of today, sell the MCK on their site?
Thanks for watching. CAA USA is not the actual CAA website. MCK is another production that CAA did not authorize and has filed suit as a result.
Right, exactly. I just made a similar comment.
@@PacificTacWest sorry for my ignorance, I'm coming into this late. Just recently I've become interested in a conversion for my Glock 19, just trying to figure out the most reliable route to go, but I want to keep it as a handgun with a brace for vehicle use.
All good. If you go to site below you can see letter from owner of CAA (scroll down to bottom) www.yrsinc.com/product/micro-roni-stab-gen-4-caa-gearup-pdw-converter-for-generation-3-4-5-glock-17-22-31-19-23-32/
To address a few misconceptions caaindustries.com is the original Israeli design and the forward mag extension is not a 90 degree grip in relation to the barrel so according to mrgunsandgear’s letter from the ATF it “IS” legal for a pistol (also confirmed by a gun dealer friend of mine).
I spoke with caagearup.com customer service today where you’ll find the MCK that said they haven’t been affiliated with CAA Industries in about a year or so which after looking at their products leads me to believe they’re base is from the older designs and less innovative, or a reseller if older designs mocked up with interchangeable parts.
These are my opinions based off my research so use your discretion
So
Yrs inc is the original micro Roni
Yet
SB tactical just came out and said that only the MCK is allowed to sell the SB tactical brace
What a headache 🤕
What I did notice from yrs website was that it was easier to use
Just ordered mine yesterday!
Nice. Hope you enjoy it. Love mine. Thanks for watching.
Dont shoulder it cheek it
Wait the CAA USA is A knock off I thought it was the same company.
Not sure if they updated it but on the yrsinc website it says gen 4 x version with the removable grips dosent require a SBR tax stamp, and it’s not considered an AOW. I could be wrong but if that’s what they say looks like there’s no worry. Unless they’re only talking about the angled grip part and how if you put on the fore grip then it’s an AOW..and you explained that in the video so I guess I’m repeating myself and in turn sounding dumb idk lol it was confusing on the site.
After zero in, the gun can only shoot into target only about 3 rounds. It shifts after shooting a few rounds and can never lock in place. It is seem tight, but it is always shifts.
The pistol once it's locked in? Never had that on any of the versions of the RONI's.
@@PacificTacWest mine is CCA Gen1, it is shifting even it is completely lock.
I wonder if there's a Micro Roni Gen 4X for a Glock 26 Gen 5, I see there's one on the older version Gen 4, but not for the new Gen 4X.
Thank you for your clarifying video. I am waiting to arrive my gen 4 micro roni fo rGlock 19 5 gen, hope arrive soon. I already bought sights from Macpul and Holosun red dot. I would like to ask you, what do you think about buying a muzzle extension device?Best regards, Calogero
Thanks for watching. I can't give much advice here as I haven't purchased a muzzle extension for this.
Excellent design! I wasn't a fan of the angle grip from the previous model. I like the MCK concept, but it looks too bulky. I can't wait for the new accessories coming out.
Thanks for watching. Links should be in description field but some accessories are available and ready to ship now.
@@PacificTacWest awesome! Thank you
You're welcome
Can you help me out with the legality of ordering these things? If i buy the version with only the angled foregrip, can i just order it to my door without paying any fees or registration no problem? I own a glock 17 already, do i need to pass another background check/fill out the paperwork as if i was buying another gun if i just buy the angled foregrip version or do i order it without having to go through that? I live in FL and i know when you order guns online you have to get them shipped to a store and pay a fee. Any input would help
Thanks for watching. I'm not an attorney and encourage you to review local gun laws. That being said, my understanding is this can be ordered but if any ATF paperwork is needed, this must be filed and approved before you put pistol in device. Hope this helps.
Isn't there something about the distance from the trigger to the back of the brace to be legal has to be under 13.5 inches
Thanks for watching. My understanding (and I'm not an attorney) is that is length of pull is greater than 13.5 inches that the brace can be reclassified as a stock.
Will it work with a multi switch on the back of the glock?
Thanks for watching. Space is tight. Looks like it would allow for the selector to the right of slide but not the rear.
What is the gun that fits in this? please and thank you.
Thanks for Watching. This had my Glock 19 Gen 4.
Got mine for $195 with the longer brace! Gen 4 also.
Nice
Is there a way to replace the serrations/charging handle on the new one? Mine after a few range trips I noticed that the slots started to worn down is that normal?
I haven't seen replacement charging handle for the RONI. I've have different models for years now and I haven't experienced any wear in regards to what you described.
Have you tried a Glock 34 Gen 4? I called CAA and they said buy it and give it a try. If it dosen't work send it back. They don't sound too sure
Thanks for watching and sorry for the delay. I haven't tried the Glock 34 Gen 4 in this. I will say YRSINC does a pretty good job of keeping model list up to date and I didn't see Glock 34 on it.
Well done
Thanks
How do you change the forward grip?
Each one clips on and can change out with relative ease. Out of the box neither is attached.. you can choose which one you want to use.
Available from YRS Inc: www.yrsinc.com/en/micro-roni-stab-gen-4-caa-gearup-pdw-converter-for-generation-3-4-5-glock-17-22-31-19-23-32
Does it fire with the stabilizer brace folded and whats the difference between the gen 4 and the 4x does the gen 4 not have a front mag holder?
Thanks for watching. Yes, this will fire when brace is folded. Difference is that the 4 has integrated angle grip and mag holder while the 4X has the option to have a foregrip or the mag holder.
Take a look at this link.
www.yrsinc.com/product/micro-roni-stab-gen-4-caa-gearup-pdw-converter-for-generation-3-4-5-glock-17-22-31-19-23-32/
@@PacificTacWest thanks I wanted to buy from them but they won't get back to me it makes me nervous where as caagearup has been responding to every question I had
I get that. I have only purchased from YRS and have had no issues.
Why didn't you show us with the grip installed? Is is secure or floppy or do u have a video showing both variants.
Thanks for watching. Don have an answer for you as to why I didn't show both variants. I cam say that with either grip it is secure in place and pistol locks into the RONI with no wiggle.
It’s a very well made piece. I think he held off due to a possibility that it could be a legal issue as it comes with a letter stating if installed it may become an NFA item which as an Israeli company I think their just covering their ass. It should be legal here in the states
Anyone know exactly what form numbers have to be filed for the AOW front grip install ?
Should still be Form 1
My question is if I have a 22 model do I have to move the shroud to the 22 or is it to the 17 and how do you know what the setting is is there a Mark or a number or something
Thanks for watching. No adjustment needed if using 17, 22 or 31. There a screw to adjust for full or compact Glocks. One setting for 17, 22 or 31 and another for 19, 23 and 32.
Thanks
So quick question- do we have to file paperwork regardless of which grip we keep on since we get both different forward grips?
In other words if I never plan to use the mag caddy but since it came with the weapon and is in my possession does it require me to file the paperwork for aow?
Also is this a legit place to buy it from: www.caaindustries.com/product/micro-roni-x/
Other than yrsinc? They(yrs) had really bad reviews and don’t want to risk it.
Thanks for watching. Based on my conversation with NFA branch they said a stamp needs to file if you want to attach the mag caddy grip. That conversation was some time ago but I can only speak to what I've been told.
What is the difference between this stab x model and the micro roni gen 4
Thanks for watching. Gen 4 I have is SBR version. Stab X has a mag caddy where previously the stab version had angled grip.
Pacific TacWest Thanks
What is a Tax stamp and how do I get it I'm in Dallas Texas and I wanna get this for my glock 19 gen 3
Thanks for watching. Tax Stamp registers your gun under the NFA as a Class 3 firearm. You would need to file a Form 1 with the ATF. I believe you can begin the process online. Some changes to this in the last few years but essentially file the form 1, pay the fee and wait for approval.
@@PacificTacWest who much was it when u paid
Sorry for delay...$200 for the tax stamp on the Glock.
@@PacificTacWest thanks
so confused, CAA's website sells the MCK, the Glock Store sells the MCK and even did a video on the MCK. Did CAA just go ahead and absorb the rights to the MCK and start selling them as their own because its a better design?
Thanks for watching. My understanding is the MCK is not an authorized CAA product and is manufactured by a different company all together.
@@PacificTacWest but if its not an authorized product then why would they sell it on their website and advertise with their name on it? I spoke with a CAA rep and they confirmed that the MCK is a CAA product. I dont know if they bought the rights or sued for the rights of the MCK design but it is an official CAA product now.
MCK only stands for Micro Conversion Kit, so i think they can have knockoffs with that acronym legally on other websites. The real website has MCKs that are real. And are made by the company 100%.
Can i add my own flip ups sights such as the MagPul flip ups?
Thanks for watching. Yes. I've used the MBUS on this.
@@PacificTacWest Did it come with the front mag holder or did you purchase it separately?
Can I use an MCK flashlight on the Gen 4 X?
the "MCKFL" fit my Israeli made "Gen 4 stab non-nfa" micro roni that I purchased from yrsinc perfect - the single point QD sling was also a perfect fit - I purchased my light and sling (brand new) from a seller on ebay at a better price than what yrsinc or caa usa offers them for .... and both are the real McCoys - they would likely be a perfect fit for the gen 4x version also - the ebay seller has sold lots of them and has them regularly
Can.micro.roni
Fit.a sti.2011 callatto 🔫 pistol?
Thanks for watching. To my knowledge this will not work with 2011 pistols.
What is the website to buy this one right here....
Thanks for watching. Looks like the replaced this one with one that incorporates the mag caddy and angled grip. www.yrsinc.com/product/micro-roni-stab-gen-4-caa-gearup-pdw-converter-for-generation-3-4-5-glock-17-22-31-19-23-32/
So I'm kinda late but will this work with a threaded barrel?
Thanks for watching. Yes it should work with TB but I unfortunately space doesn't allow for a suppressor once on shell.
Following up to this, is an extended threaded barrel? If so this would not work.
@@PacificTacWest ty I though I would ask before I purchase one from the GlockStore it's the Double Diamond threaded barrel
I'm personally not running one but I've seen videos of people doing so. Only thing I could find to share with you is that it won't work with an extended TB. Good luck.
will these work with a glock 20?
Thanks for watching. Based on YRSINC's website it doesn't look like it does.
The forward grip is not a vertical foregrip. It's not 90 degrees. Therefore, there should be no reason to give extra money to a domestic terrorist organization to ask them for permission
So let me get this straight. The CAA website shows the MCK. All of the reputable retailers list the MCK as a caa product and I have watched literally over 20 reviews (and several of them are the big time gun reviewers) and this is the first one that says that the MCK is not a CAA product. Some might say something like “latest generation micro Roni, or what they are now calling the “MCK”...”. At any rate, I based my purchase on all of those MCK reviews. Something is wacky here.
but both the MCK and RONI are on the CAA website?
Thanks for watching. If you are looking at CAA USA site they will be. The MCK is distributed by ME Technology not CAA. CAA sent them a letter in regards to TM infringement.
Pacific TacWest hit up caaindustries.com for the real deal or YRS. caagearup.com seems to be the knock off and is more expensive with older designs
Would this work with a glock 43x?
It won't.
coming soon! - the Israeli made one from yrsinc will probably be offered at a better/lower price
www.yrsinc.com/product/nano-roni-g43-caa-new-roni-micro-conversion-kit-for-glock-43/
caagearup.com/product/new-mck-43-43x-48-preorder/
I'm looking at 2 different sites with these devices. The CAA gear up site looks like absolute garbage and I don't see any gen4 stuff. can someone share a link?
Here is a link to YRSINC
www.yrsinc.com/product-category/pdw-conversion-kits/micro-roni-g3-g4/
@@PacificTacWest Do you recommend the gen 4 or the gen4x?
I prefer the Gen 4. That's what I run with my Glock 17 which has the tax stamp.
@@PacificTacWest Thanks for all the responses! One more question. Whats the difference between the gen4 and gen 4x
Gen4 X has the ability to swap out mag caddy grip for angled grip (similar to Gen 4 X Stabilizer). Another option to consider is the KPOS Scout. This thing is solid.
Is the top rail plastic or aluminum?
Thanks for watching. Everything is polymer on this.
an aluminum rail is available for the US made MCK - google "MCKTPR" to find it - I can't promise that it would fit the Israeli made micro roni.... but I wouldn't be surprised if it was a perfect fit - I know for a fact that the MCK flashlight and QD slings are a perfect fit for the Israeli made gen 4 non-nfa stab version micro roni sold by yrsinc (as of this time)
@@panheaddude1960 The MCK has a plastic rail. I bought the MCK gen 2 and it has an aluminum rail and it is suppressor ready. But it is huge so I looking for something a bit smaller.
@@fatherof4kids Gotcha - If the Israelis offer an aluminum rail for the micro roni, I'm not aware of it - if they don't have one yet I wouldn't be surprised if they have one in the works - both companies will probably be trying to keep up or one-up the other - you could contact them and ask - www.yrsinc.com/contact-us/
the available aluminum rail for the MCK might be able to be modified to fit the micro roni? - I hope you're able to find something that meets your needs/wants - good luck
@@panheaddude1960 never thought of that. Thanks
When I received my micro Roni the elastic strap was not attached correctly. Can you post a video on how to thread this, or point me to a video on how to attach this correctly. The company is no help. Their customer service is non existent.
I have never once called, and was able to speak with customer service. This company is dubious at best. Any instructions from anyone out there would be greatly appreciated.
Thanks in advanced.
Thanks for watching. Sorry you experienced that. Can you send me a picture of what you're talking about to pacific.tacwest@gmail.com?
@@PacificTacWest I was sent a video from the company, but it was a lady speaking Hebrew, but was easy to figure out, so not an issue anymore. Here is the link. drive.google.com/file/d/15IV3XjZHpTYoh8awRXsHCeOjxd79zpxg/view
Does the G45 fit in this?
Thanks for watching. Based on YRSINC's website it doesn't look like it does.
yes it does
RO not RA.... for fuck sakes...
What website do I go to purchase a real one??
I've gotten mine thru YRSINC
Pacific TacWest do they ship fast and from where?
Yrs is where I got mine, or caaindustries.com (the actual business site)
If the MCK is a counterfeit, does that mean TFB was fooled into reviewing it (positive review that he didn’t get paid for) and Optics planet that sells it has been hoodwinked as well?
Thanks for watching. Couldn't speak to that. There was a copyright infringement case filed against makers of MCK.
Pacific TacWest I researched it, and the court ruled in favor of CAA USA. I don’t have a dog in fight either way but I wouldn’t consider it counterfeit. I just wish I could get a mag caddy without a tax stamp and have a trigger guard all in the same package...
I agree
CAA did a revision to this one. I haven't had a chance to try it so can't tell you more than what's in this link.
www.yrsinc.com/product/micro-roni-stab-gen-4-caa-gearup-pdw-converter-for-generation-3-4-5-glock-17-22-31-19-23-32/
Is this legal in NY.
Thanks for watching. Not sure on this. I would defer to your local law enforcement.
Micro Roni with cheese
Haha...thanks for watching.
really with this model would fit a glock 34
Thanks for watching. I can't recall if this will work on G34 but you can check out yrsinc.com to see new lines and what's available for G34.
Is yrs inc a legit website?
Yep. I've ordered many times with them thru their website www.yrsinc.com/
I have recently purchased the MCK for my Glock 21, with just over 225 rounds through it I have experienced concervataly 35% failure to feed. I have used factory mags, after market mags, 10 rounders, 13 rounders and happy sticks and all have the same results. My Glock works flawlessly out of the MCK unit. I will say the groups in the unit out to 20-25 yards are great, but it is unfortunately unreliable so far. I have not used it since I put dry lube in the slide of the MCD, but truthfully I do not expect much from that, and I am quite disappointed to say the least. I bought the whole package so it looks like a wasted $400 from my perspective.
Thanks for watching. Sorry to hear about your experience with the MCK. With authentic CAA RONI's I have had no issues.
Ive read online, that putting pressure on the unit when shouldered, compresses the polymer chassis, causing the failure to feed.
on the MCK that is.
@@jeffchum_photo It's not meant to be shouldered.
Had this problem with my RONI. These systems are essentially molded plastic. Take the glock out and look inside the MCK. Run your fingers along the inside anywhere you find some molding lines. take some very fine (I think i used something above 300 grit) and get rid of those mold lines. even if your not feeling mold lines, sand down everything that slide is touching because even the most minute contact can cause problems. I haven't had any FTF or FTE's since. Hope this helps.
Thanks for the video! I recently did a video on my channel of the Micro Roni as well.
ruclips.net/video/3dFKbbfPAOA/видео.html
I’m curious though about what you said about the MCK. CAA is touting it all over their social media, so where did you hear that it’s a fake or they’re unaffiliated with it? It doesn’t make much sense for them to be bragging about a product they don’t approve of.
Thanks for watching. Notified by my contact in Israel and was provided a copy of the letter that CAA Industries in Israel sent out.
Forgot to note that MCK is made by ME Technolgy Inc using CAA Industry's patents without their permission.
Micro 'Ronnie' lol
Thanks for watching.
Ii
I ordered one Micro Roni X Gen 4 Stab from yrsinc and they sent me one with a built in angled grip and built in magazine holder. I am screwed.
Email me when you can. pacific.tacwest@gmail.com.
@@PacificTacWest emial sent.
Thanks but didn't see email in inbox or spam. Can you try one more time? Pacific.tacwest@gmail.com
@@PacificTacWest ooppsss i sent it to the wrong email address. Email re-sent.
Are the Roni X Gen 4 from yrsinc problematic? was looking to order one
ALL GUN LAWS ARE UNCONSTITUTIONAL. THE CONSTITUTION IS THE SUPREME LAW OF THE LAND
1. Congress, a state, local , or a President can not write rules, regulations or laws that supersede the Constitution. The right of the people to keep and bear arms, shall not be infringed. Any law that limits this right is an infringement.
2. Your rights do not come from the government. Your rights come from natural law or GOD whatever your beliefs are.
NOT THE GOVERNMENT per the founding fathers and all founding documents. Government’s job is to protect your rights, not remove them.
Will this work with a G17l? Will it accommodate the extra length of the long slide?
Thanks for watching. Will work with standard G17. That's what I run with it.