Milwaukee tools are very good. They take rough service well. I used them in the power house when I worked for the power company in Georgia for 44 years.
Just bought that same exact hammer drill. Then the 2953 impact. Got 2 free high output batteries with it too. Thanks to your videos. My Makitas are now my autistic sons tools.
@RougeDeBlah cause I've always been an makita fan. Till I started watching this channel. Realized what I was missing. Why I mentioned my autistic son. Plus, it's a good start for him. Though he loves to steal my Milwaukee impact. Lol
I have that exact one .. boy, I love it. Nothing that I threw at it in the last 3 months, that would make it even flinch . Yet another great milwaukee tool.
That is totally impressive but you know what I think I'm gonna just do aside with all the audities and just simply get myself ah 3/8 Impact wrench and put a 1/4 attachment to it For all my Drill bits and what have you And call it all power I'm done going through all the hoop jumping just go for all power and you can't go wrong.
Finally got me one of these bad boys today! I’ve been holding out cause I refused to pay the 200 for the bare tool and every time a good deal with free battery comes up at HD it sales out before I can get it. Found one brand new for 80 bucks today from a guy so I couldn’t pass it up
The number reason I didn't go with Milwaukee when I replaced all my power tools, was simply because I discovered Flex's lifetime warranty. I'm still a lover of all power tools that can get the job done when they're called upon.
Excellent tools, we use them in our small gold/silver mines we own in high county Colorado, they support our animal rescue military boarding home/ homestead! Atvs and crawler loaders all have packout. Thanks for the great review!🇺🇸
@@pyro323 got the brushless 20v Bauer drill for car detailing, specifically drill brushing and shampooing seats. Works great because it spins fast and doesn’t use much battery
2980-20…..free gen 4 hammer drill. 13amp 6 in grinder with free battery or tool. One of the option for free tool is the gen 4 hammer drill or free battery or 3/8 impact wrench.
@@kevinragsdale6256 not true at all, they’re newest half inch mid torque and high torque slightly beat the two year old 2767 and one year old Milwaukee mid torque by about 5% on the curve, while both of them being quite a bit bigger in size than the milwaukees. When the third gen milwaukees come out they will probably make a bit more, but both of them are great tools. Neither of them “spanks” the other they’re very very close in performance and in normal operation you would never see a dofference
If you build cages and Mount TV's on walls can I probably just use the Milwaukee M18 1.2 inch hammer drill and be fine . Those other hammer drills are more for construction because Milwaukee has the M18 compact hammer drills with out the handle
Did you try it on different settings. Like speed 2 or screw setting. Or hammer drill setting if it has. Also try with low battery and completely full battery. Also maybe different type of wood or bolt. Just to see if the torque changes alot
Take this as you will but ive turned over an engine at compression at a pretty decent speed with a milwaukee drill. Itll rip your damn arm off if you arent careful
Can you do the new Ridgid hammer drill. I have both Milwaukee and Ridgid hammer drills and I can mix concrete faster on the Ridgid compared to Milwaukee fuel. Would like to see power of Max output Ridgid hammer drill
@@ToolswithSoAlz that’s great! I guess I learned something knew, I always thought that battery capacity played a significant role in amount of power a drill could produce for a torque test. You should do a test with different sized batteries and different charge levels on them
the torque value of the tested product is more as factory data.So even when we convert the Ibs value to torque, factory data is not obtained, do you know the reason for this, can you explain?Please.So how are we supposed to calculate?
I just dropped 400 on the pack with the gen 4 impact and gen 4 hammer drill with a charger and 2 5ah batteries. I kept my receipt because ive yet to really use them but as a diehard dewalt fan. I was let down with atomic. Its gets HOT under medium duty work so i got milwaukee. Lets hope i didnt waste the money
@ToolswithSoAlz update : I've since bought * all m18 fuel latest gens* the shop vac. The side grinder. The hackzall. 2 impact drivers (one for spare) a hammer drill. A 1/2 impact wrench with a metric and imperial deep well set. Then I got 2 3 ah high OPs. 2 5 AHs and 2 3 ahs and a 6ah forge. Lol I've COMPLETELY switched
Milwaukee claims 116 ft. Lbs. 😂. I think you can eek out a bit more torque by bumping the trigger again after it stalls out. I say manufacturers should be required to be transparent about testing method used to calculate max torgue
I would say this isn’t a proper test set up and these things bog down when they hit a wall. That wall being non predrilled wood which is a lot of resistance to a tool for a bolt that size. I appreciate the test no less because that is impressive still.
Not worth it jus wait till gen 5 comes out but I just got the gen 3 on sale your not going to miss much or notice unless you got your gen3 when it first came out and you need new ones fine because you know Milwaukee will have gen 5 in 2 weeks!
De verdad no compredo el tema de Nm torque. Un taladro dewalt DW130V de mezclar dice que tiene 11nm y tiene tanta fuerza que a estado a punto de romperme los brazos haciendo perforaciones en metales. con brocas de 1 pulgadas Yo creo y pienso que los taladros mas potente son los taladros de mezclar y pienso que es por su sistema de engranajes o transmisión. Algun experto que me explique
@@jhonimastersipayung5874 is diferent this 150 n-m is from the motor... but is diferent output of the drill.. i ben see other utubers.... germans,the tool delivery arround 75-80 newtons
@@jacobhicks3016 no, but if he's testing tools to compare them to each other and he's doing some tools with fresh batteries and others with not so fresh batteries it makes things misleading
44 foot lbs is only 528 inch lbs. That ain’t much at all, for what the gen 4 specs at. 1400 inch lbs is the highest torque it develops, currently. What am I missing?
Obviously people do not realize that is not the purpose of a drill and just because it can do something doesn't mean it's suppose to. An impact driver is made for driving or removing fasteners even some impact guns depending what it is but anyone who says you should use a drill like this Obviously has not had a drill kick back on them from the torque being applied not to mention you never apply a load to the tool your using like it appears he was doing you let it do the job itself and if it can't then you need a different tool.
Milwaukee tools are very good. They take rough service well. I used them in the power house when I worked for the power company in Georgia for 44 years.
Just bought that same exact hammer drill. Then the 2953 impact. Got 2 free high output batteries with it too. Thanks to your videos. My Makitas are now my autistic sons tools.
Lol
Great job
Why did you need to mention that your son is autistic?
@@RougeDeBlah it was a joke because he always says makita tools are terrible
@RougeDeBlah cause I've always been an makita fan. Till I started watching this channel. Realized what I was missing. Why I mentioned my autistic son. Plus, it's a good start for him. Though he loves to steal my Milwaukee impact. Lol
I have that exact one .. boy, I love it.
Nothing that I threw at it in the last 3 months, that would make it even flinch .
Yet another great milwaukee tool.
Me being a pipe fitter in the union let me tell you Milwaukee was the most reliable and powerful tools we used for our jobs.
UA?
@@TheLastPrime38there isn’t any other pipe trade/mechanical unions past in house UAW or like unions
It just kept going and going and going lol I'm seriously impressed with that!
It's impressive
Thanks for using a 6 ah, too many channels use the 5ah to perform these test. Now with the Forge batteries, they hit harder now. Good times.
Thank you!
That is totally impressive but you know what I think I'm gonna just do aside with all the audities and just simply get myself ah 3/8 Impact wrench and put a 1/4 attachment to it For all my Drill bits and what have you And call it all power I'm done going through all the hoop jumping just go for all power and you can't go wrong.
Seems legit
Finally got me one of these bad boys today! I’ve been holding out cause I refused to pay the 200 for the bare tool and every time a good deal with free battery comes up at HD it sales out before I can get it. Found one brand new for 80 bucks today from a guy so I couldn’t pass it up
44 ft lb that's as much as a Honda has
It's amazing
and much higher than vw
😂😂😂😂
@@automoto95
My TDI golf III: at 149ftlb 🗿
@@automoto95an old TDI makes more torque than the whole honda dealership combined
The number reason I didn't go with Milwaukee when I replaced all my power tools, was simply because I discovered Flex's lifetime warranty.
I'm still a lover of all power tools that can get the job done when they're called upon.
That’s beautiful right there. Great video my man!
Thank you
That's a torture test FER SURE! Wow!
Love stick’s NCIS reference, lasers or the outdated pen and twine method 😂
Excellent tools, we use them in our small gold/silver mines we own in high county Colorado, they support our animal rescue military boarding home/ homestead! Atvs and crawler loaders all have packout. Thanks for the great review!🇺🇸
Enjoying these a lot. Could you do some Bauer stuff as well to show difference between professional and diy use?
Absolutely
Stay away from any tools that come from Horrible Freight! Most of them are broke before you buy them!
@@pyro323 got the brushless 20v Bauer drill for car detailing, specifically drill brushing and shampooing seats. Works great because it spins fast and doesn’t use much battery
@@pyro323 it's horor-freight, but close enough
@@nathanbedford3443the hazard fraud
I bought one yesterday, I've always had DeWalt gonna see how I like Milwaukee for a change
I think you'll be pleasantly surprised
what’d u think? 😊
@@samonaballs123 I wouldn't go back to dewalt
@@rickygervaissgyno4081 yessir #milwaukeegang 🤘
Keep up the great work 👍🏼
I will try. Thank you
Awesome piece of equipment
Yes it is
Man if that goes on sale as a combo on Turkey day I’m going to pick it up.
It's great
It’s already on sale at home depot for as low at $290 +tax
@@miggythegreat I’m talking about a sale with extra free battery or free tool. I believe that is what will come on Turkey day.
@@miggythegreat plus I got the gen 4 for free with the purchase of the m18 fuel 3 sec breaking stop. That deal is still on.
3 sec breaking stop m18 fuel grinder 2989-20
Entonces el torque maximo de ese taladro es de 44 Lb ft. Convirtiendo a 59 Nm ???? Y no asi los 158 Nm que dice el fabricante? Rayos que decepcion😢😢😮
They're all like that
Ridgid and Milwaukee for me only
But I want some
2980-20…..free gen 4 hammer drill. 13amp 6 in grinder with free battery or tool. One of the option for free tool is the gen 4 hammer drill or free battery or 3/8 impact wrench.
Just got this Drill. Most likely will never have to drill 44 ftlbs. But good to know I have that Juice !
Undeniably a power house. Milwaukee never fail to impress it strength. That's why they have been the king for so long.
I would agree with you
Every dewalt impact in 3/8 and 1/2 drive that has just come out stomps everything Milwaukee and everyone else makes
@@kevinragsdale6256 and then you woke up
@@kevinragsdale6256 not true at all, they’re newest half inch mid torque and high torque slightly beat the two year old 2767 and one year old Milwaukee mid torque by about 5% on the curve, while both of them being quite a bit bigger in size than the milwaukees. When the third gen milwaukees come out they will probably make a bit more, but both of them are great tools. Neither of them “spanks” the other they’re very very close in performance and in normal operation you would never see a dofference
@@achilleaustin I think it's a bit of back and forth, the newest DeWalt stuff is pretty impressive like the 891 900 and 961
If you build cages and Mount TV's on walls can I probably just use the Milwaukee M18
1.2 inch hammer drill and be fine . Those other hammer drills are more for construction because Milwaukee has the M18 compact hammer drills with out the handle
Ok
My grandpa showed me to take a bar of soap and apply it to the theads.strange but works, then you can clean up afterwards
Nice I think the 3 is more powerful try that next!
I will
Is not, is faster
Gen 4 44 foot lbs
Gen 3 48 foot lbs
Would love to have one but my gen 2s are still kicking butt!
2853-22 gen 3 hex impact kit with 2 batteries + free battery or free tool.
48-59-1852PD….. Milwaukee rapid charger dual bay with 2 5 amp hour batteries….199.99
48-11-1837……High output CP 3.0 two pack for 119.00. regular price for one is 119.00
Did you try it on different settings. Like speed 2 or screw setting. Or hammer drill setting if it has. Also try with low battery and completely full battery. Also maybe different type of wood or bolt. Just to see if the torque changes alot
Could you do Craftsman impact driver vs Craftsman hammer drill, I wanna see which one I should be using (if you have them)
Or 2804-22-48-1850 gen 3 with three batteries no hack.
Great Video
Thank you.
2804-22…Gen 3 hammer drill comes with 2 batteries + free extra battery or free tool.
No boy another new tool
Strong like street military.
Bu uzaylı,Alien teknolojisi gibi birşey olmalı.Ohaaa😮
Ok
Still happy with my 2704
Take this as you will but ive turned over an engine at compression at a pretty decent speed with a milwaukee drill. Itll rip your damn arm off if you arent careful
Use the "B" stick
Milwaukee the best ... flex tools are right there some tools are even better than the Milwaukee put never had been tested in crazy wheather:)
Great point!
Can you do the new Ridgid hammer drill. I have both Milwaukee and Ridgid hammer drills and I can mix concrete faster on the Ridgid compared to Milwaukee fuel. Would like to see power of Max output Ridgid hammer drill
I can and I will. I also plan on doing this when the new Ridgid hammer drill comes out next month
You should use a fully charged battery for a test like this
Check out the retest. Numbers are the same but you know
@@ToolswithSoAlz that’s great! I guess I learned something knew, I always thought that battery capacity played a significant role in amount of power a drill could produce for a torque test. You should do a test with different sized batteries and different charge levels on them
Ok
Ma'am, why did you use that handle? 😉
I'm just kidding. 😊 I own that drill and love its power to size ratio.
Drill for drilling impact for driving
Whichever is closer is what I'm going to use
Right, but I think the purpose of this was to test the drill’s torque rating
Yes, that's the reason for the video
the torque value of the tested product is more as factory data.So even when we convert the Ibs value to torque, factory data is not obtained, do you know the reason for this, can you explain?Please.So how are we supposed to calculate?
It's in lbsft so divide that number by 12 and you'll get the inch pounds.
I just dropped 400 on the pack with the gen 4 impact and gen 4 hammer drill with a charger and 2 5ah batteries. I kept my receipt because ive yet to really use them but as a diehard dewalt fan. I was let down with atomic. Its gets HOT under medium duty work so i got milwaukee. Lets hope i didnt waste the money
You'll be happy I think
@ToolswithSoAlz update : I've since bought * all m18 fuel latest gens* the shop vac. The side grinder. The hackzall. 2 impact drivers (one for spare) a hammer drill. A 1/2 impact wrench with a metric and imperial deep well set. Then I got 2 3 ah high OPs. 2 5 AHs and 2 3 ahs and a 6ah forge. Lol I've COMPLETELY switched
Milwaukee claims 116 ft. Lbs. 😂. I think you can eek out a bit more torque by bumping the trigger again after it stalls out.
I say manufacturers should be required to be transparent about testing method used to calculate max torgue
I agree but I am going to test all of the big brands in the same fashion
@@ToolswithSoAlz yep apples to apples so to speak.
Yes sir. I am trying
I would say this isn’t a proper test set up and these things bog down when they hit a wall. That wall being non predrilled wood which is a lot of resistance to a tool for a bolt that size. I appreciate the test no less because that is impressive still.
The reel is mirrored
Yes
Ive really been debating upgradinf my m12 and m18 to new gen but definitely seems worth it.
I think it is worth it unless you find a great deal on the Gen 3
Not worth it jus wait till gen 5 comes out but I just got the gen 3 on sale your not going to miss much or notice unless you got your gen3 when it first came out and you need new ones fine because you know Milwaukee will have gen 5 in 2 weeks!
De verdad no compredo el tema de Nm torque. Un taladro dewalt DW130V de mezclar dice que tiene 11nm y tiene tanta fuerza que a estado a punto de romperme los brazos haciendo perforaciones en metales.
con brocas de 1 pulgadas
Yo creo y pienso que los taladros mas potente son los taladros de mezclar y pienso que es por su sistema de engranajes o transmisión.
Algun experto que me explique
gotta put it in 2nd speed mode
Lol! Not for this task.
Is the sound of the motor still as high pitched as on the 2804? I couldn't take it and sold it off because of this.
Not quite
i really wanna know if these are real milwaukee tools or the home depot cheap chinese brand that milwaukee sells
Would it matter or do you just look for a reason to not like something?
Cool can you run that test with flex gamer drill
Yeah
Is that model reliable?
It's amazing
Wow
А чего резьба левая?
Impacts have over 200ft lbs of torque
You wrote that just to tell me you didn't understand the video. Ok
i personally would have used an impact driver for that with the risk of the drill spinning and possibly breaking an arm
That's what the handle is for
This drill have anti kickback protection 🤫
Why use a deep socket?
Why not?
Milwaukee is elite man can't be touched
2853-22-11-1850….M18 fuel Gen 3 hex impact driver kit with 3 batteries. No hack.
I wonder if the battery was still at 4 bars after 🙃
It didn't start out at 4 bars
@@ToolswithSoAlz my bad, just wondering how long the battery will last on that tool. It's impressive !!
A 6 would normally last.me a day in the field, maybe more
44 ft /punds is 59 newtons metro?? I dont understand (bosch have 80 newton)
One of the reasons for doing this series is to show the differences between what company's say their tools do and what they actually do
I agree, the results must to be totally real if you use only one test gadget on the diferents brands... please make a converssion newtons
I will try to remember to do that
The newest Bosch have 150Nm (110 ft pounds)
@@jhonimastersipayung5874 is diferent this 150 n-m is from the motor... but is diferent output of the drill.. i ben see other utubers.... germans,the tool delivery arround 75-80 newtons
Dope device… amazon?
Harbor Freight
@@ToolswithSoAlz thanks. Subscribed. Waiting for that gen4 redo.
Probably this weekend on that
Only 59.6 Nm torque ? Unbelievable
I believe that is the second highest measurement to date
Don't hurt yourself, that little thing is stronger then you.
Nope
Left hand thread?
Nope
Um you dont know that 44 ft lbs is nothing?The impact wrench is near 800 ft lbs.
Thank you for your instant expertise
Its stated that it can go up to 158ft lb online?
It isn't
@@ToolswithSoAlz that's what it states online
Did you watch the video?
@ToolswithSoAlz that was my mistake, it's max 158Nm which is still 116ft lbs
Do you read the specs of them before you try and compare
@oOMXROo Did you see the video? They can put a trillion ftlbs on the box and special needs folks will just believe it
Gotta redo with a fully charged battery
Ok
Not always gonna have a fully charged battery but then again lag bolt are kinda an impacts job not a drill
@@jacobhicks3016 no, but if he's testing tools to compare them to each other and he's doing some tools with fresh batteries and others with not so fresh batteries it makes things misleading
It didn't finish the drive!
Ok
“Hammer drill “not wood drill… let’s see the concrete bud!!
You do realize that this is a torque test? Putting it in hammer mode, as if it were going into masonry, would make no sense.
But it's an already drilled hole? Not really sure I see the point tbh
Some people just think they know everything but show everyone they know nothing.
@@ToolswithSoAlz not sure what you're getting at. 🤔
The vibe I'm getting here is, instead of responding properly to a viewer, you attack them because you don't know what they are asking. Nice.
How much in nm? I am too lazy to convert) Is it soft or tough moment?
Idk
Puedo batir lodo???
K
44? Hmmm odd
Try again with speed 2?
Quisiera que pruebes el DeWalt DCD999. Veamos que dato sale
I've done it
Use the other camera on your phone. Being in reverse image makes me dizzy!
can you test their Super Hawg?
If I can I will
スポーツカー並のトルクやん😮
44 foot lbs is only 528 inch lbs. That ain’t much at all, for what the gen 4 specs at. 1400 inch lbs is the highest torque it develops, currently. What am I missing?
They lied
@@ToolswithSoAlz Well, that’s just disappointing, ain’t it?
Obviously people do not realize that is not the purpose of a drill and just because it can do something doesn't mean it's suppose to. An impact driver is made for driving or removing fasteners even some impact guns depending what it is but anyone who says you should use a drill like this Obviously has not had a drill kick back on them from the torque being applied not to mention you never apply a load to the tool your using like it appears he was doing you let it do the job itself and if it can't then you need a different tool.
Yes sir
Very good assessment.
And in metric please?
Google
That’s it?
The third strongest
Flex 💪
3/8 or 1/2 inpact wrench.....
Did you understand the video?
Imagine taking something 12 inch
Sounds like the voice of experience
That's less than half of its specs. millwaukee says 1400in. Lbs which is 116 Ft. Lbs
Still one of the highest
You will if you put it in speed 2.
How do we not know you already pre drilled the hole
You are welcome to try to do the test yourself and see
@@ToolswithSoAlz next time you should do a video showing maybe pre-drilling in the hole half an inch so the bolt can stay
The hole isn't a half inch deep. It's about six inches so the tool has time to build momentum.
@@ToolswithSoAlz ok so now it makes sense
No worries
If you change the power setting to level 2 you will have much more torque
Absolutely not. Speed two is for high speed with low torque. Speed one is low speed bit high torque
@@ToolswithSoAlz i did not know that
Is OPP high torque?
Opp?
How is it in Nm ?
About 60
Maybe put it in 2
For what? Speed two is for high speed and low torque
My ryobi impact DRIVER has 183 ft lb 🙃
Not really
That’s pathetic. Just get a 3/8 impact and put the attachment on it. You’ll have 200ftlbs. Then.
Ok
What size hole did you pre-drill?
Did you see the drill stop?
@@ToolswithSoAlz that doesn't answer my question. Fail
It does
5/8 lag bolt doesn't mean you drilled a 5/8" hole first