Thanks. I very much appreciated this video. I'm a fellow artist and don't like using 2 part resins for a few reasons. But this gives me some hope of finding a way that may work better for me. Blessings!
Thank you, Yvonne, this is exactly what I was looking for, this morning. I really enjoy the way you explain things so clearly. Today you did the same. I have both kind of resin, and often use the UV with nail polish painted pendants. I am having a heck of a time figuring out how long the molds need to stay in, but your layering approach makes so much sense, I'm going to give that a try.
Ty ty ty I've been watching you practically since you started I am just not accustomed to leaving comments all the time but I had to stop and say thank you especially for your Electro forming videos and I found yours after I found Jason Welch videos. So now I'm doing that too. Thank you for all these awesome lessons. :-)
I just did a VERY small test of this UV resin... just three cabs poured in a silicone mold. To be fair, I've never worked with resin before, but there was no mixing (obviously) and I left them under the UV lamp for 2 timings of 2 minutes each since one of them felt a bit tacky after 2 minutes. It looked like they were going to be okay as far as hardness went, but they were still a bit tacky so I used alcohol on them and they turned cloudy. Can't tell whether it was all throughout or just top or just bottom, but, I tried a couple of different "fixes" just to see if I could figure it out and NOPE! ... I'm off to try the Ice Resin as I have a couple of project pieces that I don't want to put ANY resin on until I know what the hell I'm doin'! You make things look easy! LOL
Hi Yvonne. Love your tutorials because they're so varied. Looking at the round cabs on your table, is there any way you can do a wire wrapping tutorial on round cabs with round wire? I can't seem to find any. Thanks in advance if you have time to do one!
I'd like to see more video's using this resin. Can you incorporate thing in this like flowers or something small like that? I have some ideas that I'd like to try. Thank you for this video and all of your videos They get my creative juices running.
Hi Yvonne, your bezels (sorry, I call them bezels, not trays!) look absolutely gorgeous. I've bought some UV Resin but I've never used it before - I normally use Ice Resin which is a 2-part epoxy resin. So, thank you for this great tutorial. Love Amanda
Very NICE!! Ok .so for my resin " uv resin " I have had great success with Monicure Rapid Resin, AND they also have special resin pigment. I use it for both my crafts and my 3d resin printer :)
I thought that was our crickets :D and my cats could hear through the headphones they were gonna jump me :D lol Love this project, but I'm still trying to master copper wire wrapping :P /hugs tight
Awsome Von, where did you get tear shaped Cabs? I remember watching you do the Dragon eye Braclet cuff, I was hooked on your videos and I knew you were and are my Guru Teacher for jewelery , Thank you!!:)Silly me, Just found the link for tear drop trays! In Va, Bad weather here ...Florence.
Love your creations! This is the resin I use (the only one I've tried so I don't have anything else to compare it to lol) but I really like it! As a beginner with resin I find it pretty easy to work with. I do use some mica pigments in it sometimes and I find it cures great as long as you don't overdo it or use too thick of a layer but for my projects it works really well! And if I want to color it without the shimmer of the mica pigments, I've been experimenting with using gel food coloring and it seems to work really well as long as you don't use too much. I made some pretty cool dragon wing earrings with polymer clay and this resin the other day, I'll tag you on my insta post so you can check em out if you want :) Thanks for all your awesome vids, you inspire me to keep creating! :)
Very Cool! I have that same UV resin, and I want to dome my daughters picture in one of the circle trays that you showed. But I don’t want to ruin the pic. What would you do? P.S. Your work is AWESOME! 😁💯❤️
A customer wants a walking stick with glowing runes carved into it. I was thinking of putting in a thin layer of red metallic nail polish and then pouring this stuff over that to fill in the rune carvings. Think that would work?
A dark color like a dark red against a dark wood would be dark. You night not see the color. Experiment with doing a thin white layer first and then your color
Hi! I loved the tutorial. I’m starting to work with resin making pendants with an item inside and did the layers, as suggested, then hardened with my UV lamp. I added the item then a layer on top, however, the layer with the item hardened with a bubble under it! How can I ensure this doesn’t happen again? I tried sliding the item in rather than plonking it in but the same happened again! Do I just leave it for a bit before putting it under the UV light? Many thanks for your help!
Do those metal pendants tarnish, or effect the skin? You could do a layer of resin on the back first, to completely protect skin from the metal, then fill in the front. An extra step, but it protects the skin more. It's my method.
Gorgeous as usual :) i want to be on your level of craftsmanship one day :) I have a question though, if i watch one of your tutorials and make something am i able to sell it since it wasnt technically my idea?
Foxflame 1014 Von is so sweet and kind! She has mentioned before that she supports anyone that wishes to sell any item made from one of her tutorials. She is brilliant and wishes to share the creativity and wants everyone to prosper. 🙂
@@silkandcottonhawaii thank you :) i just didnt want to sell anything and be in trouble. But i doubt id be skilled enough to make anything as well as she does.
Heya, Fox! Please sell your creations made from my tutorials ♥️ my only request is that of someone asks you how its made, where to buy beads, etc that you pass along what you have learned 🤗
So pleased to have found this excellent video. I've been looking for a good resin that can be used straight from the bottle. Yvonne, do you know whether the cured resin would be heat- and dent-proof if it were used on ceramic tiles (to be used as coasters for cold or hot drinks)?
Hi Yvonne! TFS so much knowledge with us. I want to try my hand at UV resin. I have that same resin ( no smell to me. It's my nose though😂). I thought the lamp I purchased would stay on for as long as I wanted it too. But I was pressing the 60 sec button a few times consecutively for each layer. Good Grief Charlie Brown Rosetta! But I heard you say 1 1/2 minute curing time? I was trying to also check out ur lamp but the link is broken. What must I do? TIA❤
Hi Yvonne, might I ask where you find the silicone work surfaces that you use? I have been searching for them for so long and thus far have been unsuccessful,
Hello, Michael! A lot of the tools I use in my older videos are no longer available, but here are the two types of silicone mats that I currently keep in stock: amzn.to/3mXVLqU and amzn.to/3h38mFA I hope this is helpful to you!
@@backtoearthcreations Thank you so much. I looked at these and they look pretty good, especially the honeycombed ones which will be great for dome effects.
Hi, thank you for the tutorial. How to prevent dried resin from falling out from the tray? I use the same trays as you do and a pretty popular uv resin type. And keep on having the same issue - it just falls out. I even tried adding super glue before pouring the resin in 😅 - doesn't work
Hi! I was wondering whether I should coat my uv resin. It is not sticky or anything but it feels somewhat plastic and not very hard, I'm afraid it may get scratched. Does anybody know? Should I do varnish or nail polish clear coat?
With the Decorum how long do you put it in the UV lamp for? I will be mainly using as a finish for my pieces. I'm just starting and actually don't have my resin yet,in waiting And purchased the one from China(Quioa Quioa) have you ever tried it?
can you please share where you got your up lamp? i believe it should be 36w but am having difficulty finding one....love your videos thank you for sharing your talents
What are you using to film? I'm curious because I want to start making videos as well and my mom makes cards and we're trying to figure out how and what people are using to film their videos with. If you could help me that would be so lovely!! Keep crafting!!
I can’t seem to use the colors for uv resin. Just a globby mess. Do you have information on that? Bottle is in Chinese, company told me to look on internet for directions!
For your non-UV resin projects you should look at this video ruclips.net/video/JfJCHW-VyJ4/видео.html he did some interesting tests for differnt things to dye resin.
How freaking weird, I was just looking this stuff up on Amazon to see how it worked, and this video popped up. Must be a sign from the gods...😃
trekguy66 or a sign that Big Brother is watching us 😂😂😬
Thanks. I very much appreciated this video. I'm a fellow artist and don't like using 2 part resins for a few reasons. But this gives me some hope of finding a way that may work better for me. Blessings!
I just became a patreon. Love watching you teach us how to do so many things. Thank you.
Thank you, Yvonne, this is exactly what I was looking for, this morning. I really enjoy the way you explain things so clearly. Today you did the same. I have both kind of resin, and often use the UV with nail polish painted pendants. I am having a heck of a time figuring out how long the molds need to stay in, but your layering approach makes so much sense, I'm going to give that a try.
Ty ty ty I've been watching you practically since you started I am just not accustomed to leaving comments all the time but I had to stop and say thank you especially for your Electro forming videos and I found yours after I found Jason Welch videos. So now I'm doing that too. Thank you for all these awesome lessons. :-)
I can't wait to get some of that UV Resin, I'm wanting to get into making resin pendants and stuff. Yay!!! 😊💜
I just did a VERY small test of this UV resin... just three cabs poured in a silicone mold. To be fair, I've never worked with resin before, but there was no mixing (obviously) and I left them under the UV lamp for 2 timings of 2 minutes each since one of them felt a bit tacky after 2 minutes. It looked like they were going to be okay as far as hardness went, but they were still a bit tacky so I used alcohol on them and they turned cloudy. Can't tell whether it was all throughout or just top or just bottom, but, I tried a couple of different "fixes" just to see if I could figure it out and NOPE! ... I'm off to try the Ice Resin as I have a couple of project pieces that I don't want to put ANY resin on until I know what the hell I'm doin'! You make things look easy! LOL
You are supposed to wipe with make up cotton pad and rubbing alcohol to get rid of the tacky layer. Ali Express has uv reasonablely priced
Beautiful, I have just started the UV, & really like it. Thanks Deb
Exactly what I needed! You are the BEST!
Hi Yvonne. Love your tutorials because they're so varied. Looking at the round cabs on your table, is there any way you can do a wire wrapping tutorial on round cabs with round wire? I can't seem to find any. Thanks in advance if you have time to do one!
Thank You! I can't wait for your video on how to make silicone shapes and things!
I'd like to see more video's using this resin. Can you incorporate thing in this like flowers or something small like that? I have some ideas that I'd like to try. Thank you for this video and all of your videos They get my creative juices running.
Hi Yvonne, your bezels (sorry, I call them bezels, not trays!) look absolutely gorgeous. I've bought some UV Resin but I've never used it before - I normally use Ice Resin which is a 2-part epoxy resin. So, thank you for this great tutorial. Love Amanda
They're beautiful. Great job.
Very interesting tutorial! Keep up the great work!
Is there a reason why the uv resin stays sticky after curing for a while?
Very NICE!!
Ok .so for my resin " uv resin " I have had great success with Monicure Rapid Resin, AND they also have special resin pigment. I use it for both my crafts and my 3d resin printer :)
Oh darn I don't have any dog hair ... I will have make sure my hair stays out of it.😂
I thought the crickets were coming from my house. Great tutorial Von!
I thought that was our crickets :D and my cats could hear through the headphones they were gonna jump me :D lol Love this project, but I'm still trying to master copper wire wrapping :P /hugs tight
Awsome Von, where did you get tear shaped Cabs? I remember watching you do the Dragon eye Braclet cuff, I was hooked on your videos and I knew you were and are my Guru Teacher for jewelery , Thank you!!:)Silly me, Just found the link for tear drop trays! In Va, Bad weather here ...Florence.
You can buy the trays/bezels from companies like: 'iceresin.com' and other online stores. Just google: 'where can I buy bezels?' Good luck.
Lovely. I’ve never used uv resin but I’d like to. But it IS expensive, especially here in the UK. £20-30 for a small bottle. 🇬🇧👍👍
Love your creations! This is the resin I use (the only one I've tried so I don't have anything else to compare it to lol) but I really like it! As a beginner with resin I find it pretty easy to work with. I do use some mica pigments in it sometimes and I find it cures great as long as you don't overdo it or use too thick of a layer but for my projects it works really well! And if I want to color it without the shimmer of the mica pigments, I've been experimenting with using gel food coloring and it seems to work really well as long as you don't use too much. I made some pretty cool dragon wing earrings with polymer clay and this resin the other day, I'll tag you on my insta post so you can check em out if you want :) Thanks for all your awesome vids, you inspire me to keep creating! :)
Very Cool! I have that same UV resin, and I want to dome my daughters picture in one of the circle trays that you showed. But I don’t want to ruin the pic. What would you do? P.S. Your work is AWESOME! 😁💯❤️
I use mod podge to seal printed images before using resin on top (at least 2 layers). Hope this helps
A customer wants a walking stick with glowing runes carved into it. I was thinking of putting in a thin layer of red metallic nail polish and then pouring this stuff over that to fill in the rune carvings. Think that would work?
A dark color like a dark red against a dark wood would be dark. You night not see the color. Experiment with doing a thin white layer first and then your color
Awesome tutorial
Hi! I loved the tutorial. I’m starting to work with resin making pendants with an item inside and did the layers, as suggested, then hardened with my UV lamp. I added the item then a layer on top, however, the layer with the item hardened with a bubble under it! How can I ensure this doesn’t happen again? I tried sliding the item in rather than plonking it in but the same happened again! Do I just leave it for a bit before putting it under the UV light? Many thanks for your help!
Do those metal pendants tarnish, or effect the skin? You could do a layer of resin on the back first, to completely protect skin from the metal, then fill in the front. An extra step, but it protects the skin more. It's my method.
Whoot! I loves me some resin! :)
That's pretty nifty.
Do you have to go through with sanding and all that like the 2 part resin? Can you use it with the silicone moldsS
Hello my friend
Is this strong material that does not scratch easily
Gorgeous as usual :) i want to be on your level of craftsmanship one day :)
I have a question though, if i watch one of your tutorials and make something am i able to sell it since it wasnt technically my idea?
Foxflame 1014 Von is so sweet and kind! She has mentioned before that she supports anyone that wishes to sell any item made from one of her tutorials. She is brilliant and wishes to share the creativity and wants everyone to prosper. 🙂
@@silkandcottonhawaii thank you :) i just didnt want to sell anything and be in trouble. But i doubt id be skilled enough to make anything as well as she does.
Heya, Fox! Please sell your creations made from my tutorials ♥️ my only request is that of someone asks you how its made, where to buy beads, etc that you pass along what you have learned 🤗
My first experience with this coming up on Friday. Where do I get the U V light and what kind is best? I love how you demo. You get right to it.
Thanks once again Von mine is in the post. 🙂
Use a bbq lighter and swipe over your piece quickly, removes all the bubbles
I want dat one, and dat one, and dat one, and dat one ...
What’s the brand of the sponsored resin? Decoram? I cannot find it. Thanks! :)
very pretty creations what kind of uv lamp do you use here
Hello. Beautiful work. Do you have a tutorial on how you did the swirly color layer on the teal pendants in the upper left? Thanks.
Do you have a update on what these look like now three years later?
can't find the link for the resin, would love to try it however, next stop, Ali Express
Hi Yvonne! Thanx for the resin tutorial! Can you explain how long do we place the cabs under the UV light for different sizes? Thanx 😉👍😍
What do you use for the color layer?
So pleased to have found this excellent video. I've been looking for a good resin that can be used straight from the bottle. Yvonne, do you know whether the cured resin would be heat- and dent-proof if it were used on ceramic tiles (to be used as coasters for cold or hot drinks)?
Any vhan e you could show us how to do those beautiful teal pendants?
Hi Yvonne! TFS so much knowledge with us. I want to try my hand at UV resin. I have that same resin ( no smell to me. It's my nose though😂). I thought the lamp I purchased would stay on for as long as I wanted it too. But I was pressing the 60 sec button a few times consecutively for each layer. Good Grief Charlie Brown Rosetta! But I heard you say 1 1/2 minute curing time? I was trying to also check out ur lamp but the link is broken. What must I do? TIA❤
Hi Yvonne, might I ask where you find the silicone work surfaces that you use? I have been searching for them for so long and thus far have been unsuccessful,
Hello, Michael! A lot of the tools I use in my older videos are no longer available, but here are the two types of silicone mats that I currently keep in stock: amzn.to/3mXVLqU and amzn.to/3h38mFA I hope this is helpful to you!
@@backtoearthcreations Thank you so much. I looked at these and they look pretty good, especially the honeycombed ones which will be great for dome effects.
How to overcome the sticky uv resin
Hi, thank you for the tutorial. How to prevent dried resin from falling out from the tray? I use the same trays as you do and a pretty popular uv resin type. And keep on having the same issue - it just falls out. I even tried adding super glue before pouring the resin in 😅 - doesn't work
Could you tell me where you got your uv light from please?
Uv light what do you use.. what watts?
Hi! I was wondering whether I should coat my uv resin. It is not sticky or anything but it feels somewhat plastic and not very hard, I'm afraid it may get scratched. Does anybody know? Should I do varnish or nail polish clear coat?
Beautiful thx
They are gorgeous! So no more mixing for resin?
With the Decorum how long do you put it in the UV lamp for?
I will be mainly using as a finish for my pieces.
I'm just starting and actually don't have my resin yet,in waiting
And purchased the one from China(Quioa Quioa) have you ever tried it?
Nice
could you do a video on wire wrapping an uncut stone?
Are you able to lay this resin on top of plexiglass aka acrylic sheets?
What do u use as a surface for your jewellery
How do u stop the resin leaking
I just bought that same resin today 😂
36 W Nail Lamp can ui use this one for resin uv>?thank
does this turn yellow in the sun after a while
can you please share where you got your up lamp? i believe it should be 36w but am having difficulty finding one....love your videos thank you for sharing your talents
lol sp UV
never mind, just saw how thoughtful you are the link was posted. 🤪shame on me
Hi, I just wanted to know what is the best uv resin for mako jewellery?
I am late to this video. Could you recommend any other lamps? The one you have linked is a dead link now.
Have try combining two part resin with uv resin?
What are you using to film? I'm curious because I want to start making videos as well and my mom makes cards and we're trying to figure out how and what people are using to film their videos with. If you could help me that would be so lovely!! Keep crafting!!
Heya! I just use my phone: this was filmed on a galaxy 7
What lamp are you using? The link won't work. :(
Lol Dog Hairs... Now you can see why I call my fibre company "Just a lil Corgi". Want dog hair just ask for more lol
oh it's crickets ,I thought it was my computer acting up.I had my ear up to my computer (eeh? something grinding in there?).
Спасибо за видео. От меня лайк.
Do you know if it will get cloudy or turn yellow over time?
That is the next thing I will be testing, time will tell!
That's my question too. I've seen tests for different brands of mixed resin, but I can't find anything on the UV resin.
I can’t seem to use the colors for uv resin. Just a globby mess. Do you have information on that? Bottle is in Chinese, company told me to look on internet for directions!
How long under uv or sunlight does it take for.the resin to dry
We can use Nail Lamp to dry
For your non-UV resin projects you should look at this video ruclips.net/video/JfJCHW-VyJ4/видео.html he did some interesting tests for differnt things to dye resin.