Good, easy to follow video. It’s short and to the point! Most people talk forever to get to the point 🤣🤦♀️. Thank you so much and your product is darling!!
I think Porcha did a great job with her tutorial. The negative comments are BS. The hack works IF done correctly. You’re gonna make a mistake or two as you’re learning a new process. If you’re not sure about a technique then practice on fabric rather than t-shirts.
20 years in the nail business, yours are beautiful, now I'm starting a new business and look forward to all the advice ,thanks a lot , greetings from Croatia(Eu)
@@ColorMePorcha I was thinking about your nails, yours are beautiful. even though I don't do them, I have working girls in the salon who do it, I can always recognize beautiful nails . Thanks in advance
Hi Porcha!! I've been watching your videos for a little while now and I love them. they are very easy to understand and you get right to the point. and I have to say you are quite creative as I love the designs you create in Canva. I have a question for you - I converted my Epson printer to a sublimation printer. I noticed that your colors are incredibly vibrant and they pop! May I ask, do you have a converted printer or a printer for sublimation? If it is converted, would you share your printer settings or guide me to where I can find them? I even got the ICC code from Printers Jack (the ink I use), and my reds are still to orangy. I've tried everything....... I'm wondering if I need to bite the bullet and get a sublimation printer?......😝. TIA!!!😊
Thank you Porcha for all the great information and the tutorial. I am just getting started and all your information was very helpful especially the information with WORD. I will definitely return for more content.
Hi Porcha, I am so glad I found you. You did such a wonderful demonstration and I will be purchasing some DTF powder to try it out very soon. I wish RUclips would add the share images feature so that I can show you the finished product. Have a great day.
Thank you so much for the helpful tips. My ink rubbed off my shirt. I believe it was because I used my inkjet printer. I will try with my sub printer tomorrow.
Nice video and a nice tip to put the tape on the film. I get black streaks on the film too many times, do you have any tips to keep that from happening? My printer only feeds from the front so that may be part of the problem. Thanx for the info.
I love your videos, you are very straight forward. My question is, I have a HP Envy 7640 Printer, so can I use this printer to print on the film paper?
Hi Porcha, absolutely love this video 🙂.I dont have a large heat press only a small cricut one. When you put the powder on then heat would that be similar to using a heat gun for embossing powder, do you think that would work.
Hi Porcha! New subbie here. After watching this video and others, I decided to try this hack out. You seem to get some really great results. After much trial and error, adjusting cure temp and time, press temp and time, multiple times, I just can't seem to get there. My images are coming out grainy looking and/or cracking. I thought the powder wasn't melted all the way so I adjusted the temp and time for that. Didn't work. I followed the instructions to the letter that came with the Yamation kit, no luck there either. I am using the HTVRont auto heat press to cure and press. The platen on that press is about 2 inches from the press mat so I increased the temp and time for curing to make sure the powder was completely melted. And it was! Images still coming out bad. Any suggestions on what I'm doing wrong? I am using 100% cotton to test on. Any help would be greatly appreciated. Thanks!
Yes, you could. Because we're using sublimation ink, the same rules apply. Sublimation Ink works best on white and next light colors. So a lighter pink should work.
Hi Portia, loved all your videos, i just got my Sub printer and all your videos have helped me so much. May i ask what’s the difference from normal Sub paper Verses the DTF powder ? Loved your Mickey shirt. I tried to buy the image but its no longer for sale. Im a huge Mickey fan. Would you consider selling your design with the words on it, would love to put this on my craft bag. Keep up the great Work. Thanks Vicki 😊
Regular sub paper is for polyester apparel and can only be printed on white, doesn't require special powder. If planning on trying the DTF hack seen here and elsewhere on YT, you will need DTF film/powder which can then be pressed on 100% cotton white, light and dark.
Hi there, love your shirt by the way, I'm quite new to this but I want to be able to create sublimation shirts and DTF shirts using this Hack, I was wondering would an Epson EcoTank ET-8550 be good to do this with and would i have to change the ink or can I use the same sublimation ink that comes with it?
They Porcha new sub. And I love this hack & very beautiful image & color. But I had a question. What kind of printer did you use? I have an inkjet but looking into getting a sub printer. Thanks a lot ! ❤
I do have a question though, I'm thinking of creating my own t-shorts, I have the Epson ET8550, what software do you actually use to print your DTF transfers? I've been doing research and so far what I've been seeing is expensive, any suggestions?
If you were to buy an Epson Eco tank it can be converted to sublimation, just know that the minute you put sublimation ink in the tanks it will void the warranty. Don't use the ink that comes with the printer, that is for regular inkjets. You would need to buy sublimation ink.
Hi @colormeporcha do you do sell custom T-Shirts? I want to buy 4 custom T-shirts I can design them … I just need them printed and heat pressed. I was trying to find Black Own Business to work with. If so please let me know the cost and how long it would take as I need them by October 13 for a birthday party. Thank you and have a blessed day🙏🏾
What temp did you use to melt the powder? I have tried so many times, wasted t-shirts, and can still not get it right. When I pill it, some of the ink pills off the shirt 😩
I let my heat source hover as close as possible with out touching the image at 320° for 90 seconds; Depending on how large your image is and how close the heat source is you may need more time. Also be sure to press twice and peel cold both steps are important. Best wishes ✨
Good, easy to follow video. It’s short and to the point! Most people talk forever to get to the point 🤣🤦♀️. Thank you so much and your product is darling!!
I think Porcha did a great job with her tutorial. The negative comments are BS. The hack works IF done correctly. You’re gonna make a mistake or two as you’re learning a new process. If you’re not sure about a technique then practice on fabric rather than t-shirts.
Thanks Marletta!
I tried everything to get the paper to go through my printer and nothing worked until I tried your way. Thank you so much for making this video :)
Glad it helped!
20 years in the nail business, yours are beautiful, now I'm starting a new business and look forward to all the advice ,thanks a lot , greetings from Croatia(Eu)
Heeeeey! Best wishes ✨️
@@ColorMePorcha I was thinking about your nails, yours are beautiful. even though I don't do them, I have working girls in the salon who do it, I can always recognize beautiful nails . Thanks in advance
Love it! Great tutorial. I just bought a manual heat press. This helps if I want to make my own designs.
Love THE idea of the shaker thank you for sharing 💙
You're welcome!
@@ColorMePorcha 💙
Those colors are popping in about to start sublimation dtf also thanks for sharing
Best wishes ✨️
Hi Porcha, I have just tried your DTF Sublimation Hack and it worked a treat. Thank you so much 😘
You're welcome 😊
Hi Porcha!! I've been watching your videos for a little while now and I love them. they are very easy to understand and you get right to the point. and I have to say you are quite creative as I love the designs you create in Canva. I have a question for you - I converted my Epson printer to a sublimation printer. I noticed that your colors are incredibly vibrant and they pop! May I ask, do you have a converted printer or a printer for sublimation? If it is converted, would you share your printer settings or guide me to where I can find them? I even got the ICC code from Printers Jack (the ink I use), and my reds are still to orangy. I've tried everything....... I'm wondering if I need to bite the bullet and get a sublimation printer?......😝. TIA!!!😊
This looks beautiful!! I love it💜 how does the sublimation ink do with DTF hack when washed? I know pigment ink does very well.
I'm going through the comments trying to find the answer to this question.
I love your videos!!! You have made everything so easy to follow. Thank you so very much.😊
I have that kit but just haven't had a chance to anything with it yet. Hopefully this weekend. Those colors are popping!!
Best wishes ✨️
Hey Sis! I love this-those colors are poppin! I forgot I have the dtf hack kit- gotta try it tomorrow
Heeeey hun!
The process is so easy, I hope you do try it, best wishes ✨️
What a great video! May I ask what sublimation printer and sublimation ink you are using? Thanks again posting such a helpful video!
Thank you Porcha for all the great information and the tutorial. I am just getting started and all your information was very helpful especially the information with WORD. I will definitely return for more content.
You are so welcome!
This is beautiful. The best I've seen in Sublimation DTF hacks yet. Thank you!
Thank you, I appreciate your feedback!
Hi Porcha, I am so glad I found you. You did such a wonderful demonstration and I will be purchasing some DTF powder to try it out very soon. I wish RUclips would add the share images feature so that I can show you the finished product. Have a great day.
Thanks, best wishes ✨️
Thank you so much for the helpful tips. My ink rubbed off my shirt. I believe it was because I used my inkjet printer. I will try with my sub printer tomorrow.
Looks great thanks can it also be used on black canvas shirts? Thank you
Thanks!
No, I learned the hard way. This hack uses sublimation ink, which works best on white or light colors.
OMG you made this look super easy... its gotta be somethig I'm not doing right
Ty! What issues are you having?
What temperature of the heatpress when you cure it for 90seconds?
Hi Porcha, I was always told not to use sub ink with dtf!! So glad you did this just to show it can be done 😊
Yes, best wishes!
Hey!!! This is so pretty! How did you prevent the pizza wheel spots? I always get little dots from the wheels
This was awesome! Hopefully you have a video for dark shirts
HI, I loved it, thanks for sharing, I have a question, can I put the heat press on the image to cure?
You're welcome!
Putting the press directly in the image could ruin your design
Love this hack! Thank you for sharing your gems!!!❤❤❤I love watching your tutorials!!!💜💜💜1 question-what temp did you cure the transfer for 90secs?
Thanks!
320° with the heat source as close as possible to the image for approximately 90 seconds, could take more
Looks great, what temperature do you cure?
Thanks!
320° with the heat source as close as possible to the image
Thank you for the video, I ordered everything you suggested. I used your code too and Thank you for that. I will try everything next weekend.
Best wishes ✨
I found a sugar glass sugar shaker at Dollar Tree for $1.25 it has larger holes and works well.
Hi Porcha, I enjoyed watching your video and will be trying this hack. What printer did you use?
I Love and Enjoy the DTF HACK 💙💙💙
Nice video and a nice tip to put the tape on the film. I get black streaks on the film too many times, do you have any tips to keep that from happening? My printer only feeds from the front so that may be part of the problem. Thanx for the info.
HELLO, I LOVE YOUR DESIGN. SHIRT LOOKS GOOD.
Thanks!
Great, simple, practical and very informative video. Thumbs up Porcha 👍
Thanks Anthony!
How do you stop the blacks dots that appeared on the print?
Love your video! It's so easy to follow and understand, I am definitely trying this!
Best wishes ✨️
Sis!!! I finally did it successfully! Thanks for your guided help. Really appreciate you. I am totally hooked on this hack now lol
Love it!
I'm so glad you worked it out 💜
I HAVE THE FILM AND POWDER, I HAVE TO TRY THIS OUT IF MY PRINTER ACT RIGHT.
Thanks for the video. Silly question, did you put the tape on the glossy side as not to touch the ink?
Not a silly question, but yes that's the reason
You are such a good teacher and that shirt is too cute.
Thank you 💜
Awesome....What printer did you use to print the image on the DTF paper?
I love your videos, you are very straight forward.
My question is, I have a HP Envy 7640 Printer, so can I use this printer to print on the film paper?
Yes you can
Absolutely gorgeous
Thanks 😊
Fantastic video.
Thanks!
Heeeyyyyy! Porcha, OMG I didn't know you did this stuff...lol
Thank you sooo much! First time it came out beautiful, thanks again!
You're welcome!
That is so cute!
Colors!!!!👌🏽
Hi Porcha, absolutely love this video 🙂.I dont have a large heat press only a small cricut one. When you put the powder on then heat would that be similar to using a heat gun for embossing powder, do you think that would work.
Great video! Can you please tell me the name of the ink you used in this video??
Thanks!
Printers Jack
Thanks for the video. I have white spots on some areas of my image. Any idea what that might be from? Thanks
I haven't come across that yet, but if you figure it out, let us know😆
Thanks! Will do@@ColorMePorcha
Great video thanks
OMG "seasoning" I GENIUS. I'm always fumbling and making a mess with that powder
Love this video! I want to know do you I’m to use a certain software to create your DTF design? If so can I use it in the iPad?
Thanks! I mostly use Canva, and it can be used on an iPad.
Hi Porcha! New subbie here. After watching this video and others, I decided to try this hack out. You seem to get some really great results. After much trial and error, adjusting cure temp and time, press temp and time, multiple times, I just can't seem to get there. My images are coming out grainy looking and/or cracking. I thought the powder wasn't melted all the way so I adjusted the temp and time for that. Didn't work. I followed the instructions to the letter that came with the Yamation kit, no luck there either. I am using the HTVRont auto heat press to cure and press. The platen on that press is about 2 inches from the press mat so I increased the temp and time for curing to make sure the powder was completely melted. And it was! Images still coming out bad. Any suggestions on what I'm doing wrong? I am using 100% cotton to test on. Any help would be greatly appreciated. Thanks!
hi what do i do when my prints comes out with roller strikes from the image ink
Hey did you use sublimation ink to print your picture?😊
Yes
Hi Portia could i do this on a pink shirt or would i need white htv behind it x
Yes, you could. Because we're using sublimation ink, the same rules apply. Sublimation Ink works best on white and next light colors. So a lighter pink should work.
Love the fonts you used...could you please share the names?
Sure, Spring Whisper and the Gunslinger Waterdrop- dafont.com
@@ColorMePorcha thank you so much 😊
@@ColorMePorcha Thankx!
After you printed from the sublimation printer, did you have to allow some time for it to dry after it was printed?
Hi Portia, loved all your videos, i just got my Sub printer and all your videos have helped me so much. May i ask what’s the difference from normal Sub paper Verses the DTF powder ?
Loved your Mickey shirt. I tried to buy the image but its no longer for sale. Im a huge Mickey fan. Would you consider selling your design with the words on it, would love to put this on my craft bag. Keep up the great Work. Thanks Vicki 😊
Regular sub paper is for polyester apparel and can only be printed on white, doesn't require special powder. If planning on trying the DTF hack seen here and elsewhere on YT, you will need DTF film/powder which can then be pressed on 100% cotton white, light and dark.
I know i love this design of hers i would definitely purchase this if she sold it!!
Great video and information, thank you for making.
You're welcome!
Please do a video on adding the texting canva?
Hi there, love your shirt by the way, I'm quite new to this but I want to be able to create sublimation shirts and DTF shirts using this Hack, I was wondering would an Epson EcoTank ET-8550 be good to do this with and would i have to change the ink or can I use the same sublimation ink that comes with it?
Thanks!
You can use the same sublimation ink that comes with it.
Best wishes!
They Porcha new sub. And I love this hack & very beautiful image & color. But I had a question. What kind of printer did you use? I have an inkjet but looking into getting a sub printer. Thanks a lot ! ❤
"Seasoning the film"
🤷🏽♀️😆
How well do the colors hold up after multiple washings?
So far, it's held up very well; here's my wash test:
ruclips.net/video/piPZLudMTME/видео.html
Hello, love this hack! When I print from my Epson F170 my print don’t seem to look as wet. Would the power still work?
Hi!
As long as the ink is just wet enough for the powder to stick, you should be good
@@ColorMePorcha Thank you:)
Befroe the heat press will the glossy side be face up?
We print on the matte side, glossy side is the back
What ICC profile are you using when printing please?
Thank you
When did you take the painters tape off
I usually remove it right before I melt the DTF powder
I do have a question though, I'm thinking of creating my own t-shorts, I have the Epson ET8550, what software do you actually use to print your DTF transfers? I've been doing research and so far what I've been seeing is expensive, any suggestions?
Thank you so much for this video.... So easy to understand and I LOVE how my shirts turn out. Thank you again. :)
You are so welcome!
hi love, may i ask what printer did you use?
OMG love the shaker tip. Enjoyed your video tutorial
Thanks 😊
Hello!
My question: will this hack work on dark colors as well?
Thanks!
Hi! The short answer is no. You need different products to make the image show bright. I tried it here: ruclips.net/video/1wmGej2XVTA/видео.html
Love this the shirt is too precious
Thank you!
Disney is protective of their brand. You get caught you pay more than you’ll ever make selling shirts.
Great video. Will follow!
Thanks!
Nice!
my question is when you did the 2nd press, what were you using to cover the image? And, did you have to insert anything inside the shirt?
Will the painters tape help with lines going down the image? I have the epson 2803 printer but I keep getting black streaks
How do you use sublimation ink in your inkjet printer? Great video
If you were to buy an Epson Eco tank it can be converted to sublimation, just know that the minute you put sublimation ink in the tanks it will void the warranty. Don't use the ink that comes with the printer, that is for regular inkjets. You would need to buy sublimation ink.
so does that work on dark colors also?
Do you put the tape on the matte or glossy side?
The glossy side
Hi, can i use any sublimination printer like epson eko and get the results?
Yes, because it's about the ink.
Dtf film uses ink jet printer or sublimation ink printer?
Where do you get your blank shirts from?
Love your work ❤
so you have sublimation printer? and what wha type of printer is it
Which fonts did you use for the lettering?
The font on top is Spring Whisper, and below is A Dripping Marker; I got them both from Dafont.com.
Could you use a cricut heat press
Hi @colormeporcha do you do sell custom T-Shirts? I want to buy 4 custom T-shirts I can design them … I just need them printed and heat pressed. I was trying to find Black Own Business to work with. If so please let me know the cost and how long it would take as I need them by October 13 for a birthday party. Thank you and have a blessed day🙏🏾
What ink is in the ink jet? Regular or sublimation?
When curing, do fume smells come out?
Yes, but in my opinion, it's faint, but an open window or well ventilated area will help with that.
Hi, have you tried to wash it? Hiw's the quality after 2-3 washes?😊
What temp did you use to melt the powder? I have tried so many times, wasted t-shirts, and can still not get it right. When I pill it, some of the ink pills off the shirt 😩
I let my heat source hover as close as possible with out touching the image at 320° for 90 seconds; Depending on how large your image is and how close the heat source is you may need more time. Also be sure to press twice and peel cold both steps are important. Best wishes ✨
hi i added the tape but image only prints on the tape section can you advise me as to what in doing wrong thank you
How did you print your image?
Did you put parchment paper inside the shirt?
Yes. I either used parchment paper or a Teflon sheet I don't remember at this point, but I do know I put something in there.
What kind of printer useing
The Epson EocTank