@@urimsuh Oh wow! Glad I could help. I can't really say which one would be actually better. Probably the $30 is a lot more professional but for me, this one worked just fine and I can remake it and switch internal color with foil for example or switch the draft paper to one a bit yellowish to play around with it. That's what I love the most! Let me know how it goes for you! Regards!
Oh gosh, I am so sorry I didn't reply to your comment. I just realized I had some comments held in a different place. sorry sorry, I always do my best to reply to all comments!!! Firstly thank you for your comments, and Yessss, foil works perfectly well, although it's trickier to work with. I did also a flash bounce using foil.
ok, first of all I searched for such thing and opened 9 diff videos in new tabs to watch and your one is the first and honestly i don't feel like watching the other 8 videos!!! this is the first video of yours that I watched and you deserved my subs. cant understand why you don't have more followers by now. wish you all the best for the future. just 1 thing though!! I was really hoping for a with and with out comparison photo at the end of the video.
Oh My! Thank you so much for your kind words! You know? You are absolutely right, no idea why I didn't think of adding that to the video and I should have. However, I have one on the blog that you can see the difference towards the end of the post! Hope this helps! Again thank you so much for such uplifting and kind words! best of luck!
I did not provide any specific measurements since the pattern you can download comes it the exact size you need it in order to fit into the flash foot slot. Hope this helps!
@@thecraftingnookds Thank you. I am sorry as I could not find the download link either. My mistake! I kept searching and searching. Later I made a screenshot from the video, enlarged it and then used the tracing paper on the screen. Thank you once again.
@@riteshmanandhar6249 Nothing to apologize for. The link is there if you still need it, for some reason the text got the same color as the button but it's there. If you go to the post scroll down until you see the Flash diffuser supplies. There you will see a pink button and also the word here in pink right above both links will let you download the pattern. Hope this helps a little more! Good luck!
@@thecraftingnookds I will look onto it and I shall refer this website to the ones if they are looking to make one. Very helpful! Thank you once again.
Ok. So first problem I had, was it was too small. I fixed that by extending the width a little. The new problem I'm having. Is my flash does not work when the tab is in the hot shoe!!! It has a sensor to turn off the cameras built in flash. If I don't use the tab, the diffuser falls off.
I'm so sorry it didn't fit. Curious about what camera you got. I have 2, an old Nikon and a Canon. It fits both and none of them have any problems fitting the tab in the flash shoe. It's hard to test on all cameras. Thank you for pointing this out.
Thank you! The tracing paper is regular printer paper so you can print the pattern and cut it out. The cardboard I don't really recall but the reference is the external flash slot it needs to fit in there. Hope this helps.
Yes, that's right, and a great point out! Mine had a weight enough for it not to press on the sensors so it works perfectly, but someone had told me that he used a thicker one and it did disable the flash. Thank you for your input, I appreciate it!
@@thecraftingnookds yes I have tried tissue paper but it absorbs so much that almost none of light hit the model Now I am heading towards the tracing paper that you have suggested
Now I did same as you mentioned Tracing paper in the video and it works wonderful 💯😊 I am very happy, I have a party In my relatives, I will use this softbox there, thank you so much for this video
The printable file can be printed in both Letter and A4 as long as you don't check fit to page. It will print to the right size. After that, you transfer the patter to the cardboard or your chosen material. Hope this helps. Let me know if you have any other questions. hugs
I apologize for taking so long to fix it, I had a hard time figuring out what was causing the problem but I finally fixed it. You can (I hope) download it now!
@@Chelbow I apologize for taking so long to fix it, I had a hard time figuring out what was causing the problem but I finally fixed it. You can (I hope) download it now!
Por fin di con el problema, llevo ya tiempo tratando de entender por que a mi me descargaba y a los demas no, pero resulto el download manager el que estaba fallando. Ya esta arreglado (espero) y podras descargar el archivo!
Hola Alexis, mira el formato es carta o A4, imprimiendo al 100% y sin ajustar al papel. El material que utilice fue carton de constrccion, el que usan los arquitectos para maquetas. Usé el de 2mm grosor. Tiene que ser de un grosor que pase libremente por la zapata del flash externo de tu camara. Ya para la parte estetica depende de ti. La cartulina que mas te guste. Espero que te ayude. De igual forma todos los detalles los consigues en el tutorial linkeado en la descripcion. Saludos!
@@alexisblas2182 el formato es el tamaño del papel que uses en tu pais. algunos paises usan carta otro A4. Una vez los descargas (desde el tutorial linkeado en la descripcion), lo mandas a imprimir y en los ajusts le dices que imprima al 100%. Y ya con eso puese seguir las instrucciones del tutorial.
I don't recommend using normal paper. I use cardstock so that doesn't happen. If you want to use paper then recommend changing the glue to mod podge or UHU glue. Hope this helps!
Si, el archivo está protegido para prevenir que se abra en programas de edicion. Pero esta libre para abrirlo en programas como adobe reader, or cualquier previsualizador de PDF.
Fantastic actually! Saved me a little coin and tweeted it for my needs. I will be sharing this link with the other photo nerds.👍
Music to my years! I'm glad it worked and that you are enjoying it! All your photo nerd friends will be welcome! Thank you so much!
Thank you so much! You are the best
Thank you so much! Glad you enjoyed the video!
@@thecraftingnookds No problem:) I was just about to waste $30 on a flash diffuser until I saw your video.
@@urimsuh Oh wow! Glad I could help. I can't really say which one would be actually better. Probably the $30 is a lot more professional but for me, this one worked just fine and I can remake it and switch internal color with foil for example or switch the draft paper to one a bit yellowish to play around with it. That's what I love the most! Let me know how it goes for you!
Regards!
@@thecraftingnookds Ah I see.
I made for my Canon M50 and it was perfect!
Thanks a lot!
That's music to my ears!!! Thank you so much for taking the time to leave me your feedback!
Hugs!
Disculpe que medidas lo realizo tendría plantilla yo igual tengo una m50
There are twofold of words which I should use for your video: 1. Stunning 2.Brilliant
Thank you! I appreciate that!
This is such a great Idea, great for someone on a budget!
You put white paper on the inside to reflect the light out through the semi-clear screen. If I used foil on the inside would it be more reflective?
Oh gosh, I am so sorry I didn't reply to your comment. I just realized I had some comments held in a different place. sorry sorry, I always do my best to reply to all comments!!! Firstly thank you for your comments, and Yessss, foil works perfectly well, although it's trickier to work with. I did also a flash bounce using foil.
CAMIIIIIIIII!!! THANK YOU!!!
ha ha, I love that enthusiasm! My pleasure and I'm glad you like it!
Looks perfect would make one myself and test it this week ... will definitely comment on results .
Thank you! Yesss, please share your results!
Happy photo shooting!
Thank you so much.. this is a wonderful idea.i tried it and its amazing 😍😍
Thank you so so much for your feedback! You are the best! I'm glad it was helpful!
This is awesome, thanks for the tutorial!
Thank you! Glad it was useful!
ok, first of all I searched for such thing and opened 9 diff videos in new tabs to watch and your one is the first and honestly i don't feel like watching the other 8 videos!!! this is the first video of yours that I watched and you deserved my subs. cant understand why you don't have more followers by now. wish you all the best for the future. just 1 thing though!! I was really hoping for a with and with out comparison photo at the end of the video.
Oh My! Thank you so much for your kind words! You know? You are absolutely right, no idea why I didn't think of adding that to the video and I should have. However, I have one on the blog that you can see the difference towards the end of the post!
Hope this helps!
Again thank you so much for such uplifting and kind words!
best of luck!
❤To grateful lwant this please thank you you
Really amazing but please attach some test shots
Thank you! You can find it on the blog post linked in the description box above.
@@thecraftingnookds Ohk thanks really helpful
@@viveksaxena4455 thank you, I'm glad to help!
👏👏thanks for the tutorial !! awesome! Obrigado :)
I'm glad you like it! 🤩
Thank you much.... this works so awesome.
That's great to know!!!! Thank you!
What are the dimensions of the pattern in centimetres as lockdown is going on and can't print.?
If you pint it at its 100%, no fitting on paper you are good to go. Hope this helps.
Great! Could you please send a direct link where the measurements are mentioned as I could not find dimensions in the link mentioned!?
I did not provide any specific measurements since the pattern you can download comes it the exact size you need it in order to fit into the flash foot slot.
Hope this helps!
@@thecraftingnookds Thank you. I am sorry as I could not find the download link either. My mistake! I kept searching and searching. Later I made a screenshot from the video, enlarged it and then used the tracing paper on the screen.
Thank you once again.
@@riteshmanandhar6249 Nothing to apologize for. The link is there if you still need it, for some reason the text got the same color as the button but it's there. If you go to the post scroll down until you see the Flash diffuser supplies. There you will see a pink button and also the word here in pink right above both links will let you download the pattern.
Hope this helps a little more!
Good luck!
@@thecraftingnookds I will look onto it and I shall refer this website to the ones if they are looking to make one. Very helpful! Thank you once again.
Obrigada! #Brasil
Com muito prazer. Espero que seja útil pra vc.
Beijos
thanks
Absolutely!!!
Ok. So first problem I had, was it was too small. I fixed that by extending the width a little. The new problem I'm having. Is my flash does not work when the tab is in the hot shoe!!! It has a sensor to turn off the cameras built in flash. If I don't use the tab, the diffuser falls off.
I'm so sorry it didn't fit. Curious about what camera you got. I have 2, an old Nikon and a Canon. It fits both and none of them have any problems fitting the tab in the flash shoe. It's hard to test on all cameras. Thank you for pointing this out.
Súper cool. It’s gonna save my life 😅😅
Thanks, it does save mine whenever I run out of natural light! Hope it helps you too!
Love it
Thank you so much!!!
This is perfect, have to try it! What thickness/gram is the tracing paper?
Thank you! The tracing paper is regular printer paper so you can print the pattern and cut it out. The cardboard I don't really recall but the reference is the external flash slot it needs to fit in there.
Hope this helps.
Great ❤️❤️
Thank you so much!
@@thecraftingnookds I am making it right now.. thanks again ❤️
@@madansubedi4817 So happy to hear you are liking it!!! Thank you for taking the time to leave your comment!
be careful, making the hotshoe section too thick might on some cameras detect it as external flash connected and disable the pop-up flash
Yes, that's right, and a great point out! Mine had a weight enough for it not to press on the sensors so it works perfectly, but someone had told me that he used a thicker one and it did disable the flash. Thank you for your input, I appreciate it!
Can I use tissue paper for diffusion
I haven't tried tissue paper, but it wouldn't hurt. Please share here if you try and let us know the results. Best of luck
@@thecraftingnookds yes I have tried tissue paper but it absorbs so much that almost none of light hit the model
Now I am heading towards the tracing paper that you have suggested
Now I did same as you mentioned Tracing paper in the video and it works wonderful 💯😊 I am very happy, I have a party In my relatives, I will use this softbox there, thank you so much for this video
Just by curiosity, what are the dimensions of the rectangular?
Do I print in A4 size or something else?
Very helpful tutorial!
The printable file can be printed in both Letter and A4 as long as you don't check fit to page. It will print to the right size. After that, you transfer the patter to the cardboard or your chosen material.
Hope this helps. Let me know if you have any other questions.
hugs
@@thecraftingnookds thanks for the quick reply!
@@madoolini Always my pleasure!
Hi, i nerd the sizes, please 😮❤
The download link option is not working for me! Its showing error.
Can you please help me to found that?
I apologize for taking so long to fix it, I had a hard time figuring out what was causing the problem but I finally fixed it. You can (I hope) download it now!
It doesn't fit my flash :( i need to make the pattern bigger :(
Super
Thanks!!!
@@thecraftingnookds i try same and successfully finished
@@subeesht5583 So glad to hear that! Thank you for sharing with me!
Muito obrigado!
Obrigado a voce por visitar o meu canal! :D
The link for the pattern doesn't work. Is it still available somewhere?
Hi, I just checked and the link is working for me, it downloaded the pdf. Did you click on the Pink button?
@thecraftingnookds yes, it's giving me an error message "404 - Not Found!" :( is there another way to access the file?
@@Chelbowsame here
@@Chelbow I apologize for taking so long to fix it, I had a hard time figuring out what was causing the problem but I finally fixed it. You can (I hope) download it now!
@thecraftingnookds thanks for taking the time to fix it. You're awesome!
Excelente!!! No estaria funcionando el link de descarga 😭
Por fin di con el problema, llevo ya tiempo tratando de entender por que a mi me descargaba y a los demas no, pero resulto el download manager el que estaba fallando. Ya esta arreglado (espero) y podras descargar el archivo!
@@thecraftingnookds si efectivamente funcionó!! Muchas gracias!!!!
@@eliaslopez7977 Me alegro!
Gr8!
Thanks!!!
Disculpe cual son las medidas para realizarlo y que materiales son
Hola Alexis, mira el formato es carta o A4, imprimiendo al 100% y sin ajustar al papel. El material que utilice fue carton de constrccion, el que usan los arquitectos para maquetas. Usé el de 2mm grosor. Tiene que ser de un grosor que pase libremente por la zapata del flash externo de tu camara. Ya para la parte estetica depende de ti. La cartulina que mas te guste. Espero que te ayude. De igual forma todos los detalles los consigues en el tutorial linkeado en la descripcion.
Saludos!
Donde saco ese formato o como disculpe
@@alexisblas2182 el formato es el tamaño del papel que uses en tu pais. algunos paises usan carta otro A4. Una vez los descargas (desde el tutorial linkeado en la descripcion), lo mandas a imprimir y en los ajusts le dices que imprima al 100%. Y ya con eso puese seguir las instrucciones del tutorial.
I’m going to use a styrofoam cup. Lol
So mean...!
My white paper all wrinkled up at 2:46 after glueing.
I don't recommend using normal paper. I use cardstock so that doesn't happen. If you want to use paper then recommend changing the glue to mod podge or UHU glue.
Hope this helps!
Thank you :)
@@BrettHondow Glad to help!
Al abrir el archivo me pide una contraseña 😢
Si, el archivo está protegido para prevenir que se abra en programas de edicion. Pero esta libre para abrirlo en programas como adobe reader, or cualquier previsualizador de PDF.
@thecraftingnookds muchas gracias
Faz uns testes com esse difusor
Olá! Obrigado por entrar em contato.
Eu tenho um par com e sem difusor no blog. O link está na descrição.
Espero que ajude.
Beijos
Onde consigo imprimir esse molde?
where do i get this mold? *
No blog com link na descrição do video, estou compartilhando um tutorial detalhado mais o link para baixar o modelo. Espero que isto ajude.
If you have the time?
interesting enough I don't have any of these supplies at home
So sad to hear that. I'm sure you will find one that will fit your needs!
Regards!
How old are You? 4?
@@strippedlist 3. don't be a bully
@@Mr.DMZ. snowflake...oh my god, you don't have the tools...where do you live? In Botswana?