Hi Chris - my Zino Pro power button has stopped working, the Zino won't switch on. It clicks like it should, but it isn't lighting either of the 2 LEDs on the button board when I press it. This is after only about 10 to 15 flights - seems to be a big problem with this drone! Could be either the board or the cable, I guess?
Good afternoon, I've been following your videos since 2020. Could you give me a tip on how to find out why my zino h117s doesn't show a signal, it doesn't turn on. I already did a small test of placing a 12v 2amp source directly into the battery connector input. Still there was no signal. Is this a symptom of the zino's internal power button or control board?
This is usually the result of a bad image cable (camera) 90% of the time this is the problem with no wifi transmission signal or no connection on the zino’s I fix for people.
Thanks for this Chris, usefull as usual .Quick question my button is not broken but when i plug the battery in the drone the power goes on by itself but the wifi connection needs the button to work. I order a new button , do you think the cable has also a problem?
My zino h117s doesn't turn on anymore. It was working until I managed to resurrect a 4,200 gifi power battery. Then he didn't call again. I tried putting 1 12v 2 amp wire directly into the battery connector. no sign of turning on the button. Any testing tips.
Wait mine crashed I only have to move the to a nit because it is stuck in the on position, how do I take the top shield off like in your video it was already off you just lifted it.
@@QCGUY yes. I don’t feel it clicking like it should. I just replaced my gimbal cable. ( thanks by the way) it was all good last night. I took it out today and all was good. Flew about 30ft away and it said lost connection and went into RTH and landed. It won’t connect. Then noticed drone was off. I tried to power on and it only makes half the music and shuts off. I tried 2 other batteries and same thing. I even tried to take the button cover off and press on the actual button under it. Same thing.
@@polkcraig4485 It’s likely the power button. They are the same for the pro and original Zino. The last numbers on the board read 00038-01 if I recall.
@@polkcraig4485 sometimes the power supply board under the main board will give you the same symptoms but if you’re button feels soft it’s likely the cause.
Hi Chris - my Zino Pro power button has stopped working, the Zino won't switch on. It clicks like it should, but it isn't lighting either of the 2 LEDs on the button board when I press it. This is after only about 10 to 15 flights - seems to be a big problem with this drone! Could be either the board or the cable, I guess?
It’s either the power button board, the cable or the power supply board. I’ve fixed a lot with this very popular issue.
Good afternoon, I've been following your videos since 2020. Could you give me a tip on how to find out why my zino h117s doesn't show a signal, it doesn't turn on. I already did a small test of placing a 12v 2amp source directly into the battery connector input. Still there was no signal. Is this a symptom of the zino's internal power button or control board?
This is usually the result of a bad image cable (camera)
90% of the time this is the problem with no wifi transmission signal or no connection on the zino’s I fix for people.
Thanks for this Chris, usefull as usual .Quick question my button is not broken but when i plug the battery in the drone the power goes on by itself but the wifi connection needs the button to work. I order a new button , do you think the cable has also a problem?
It only costs a couple dollars to replace so it doesn't hurt to get the cable either.
@@QCGUY OK i ordered the power supply card too. thanks for the reply
My zino h117s doesn't turn on anymore. It was working until I managed to resurrect a 4,200 gifi power battery. Then he didn't call again. I tried putting 1 12v 2 amp wire directly into the battery connector. no sign of turning on the button. Any testing tips.
You are better to post for support in my help and support group on facebook. The link is in my bio and descriptions. Thanks
Wait mine crashed I only have to move the to a nit because it is stuck in the on position, how do I take the top shield off like in your video it was already off you just lifted it.
Search how to take apart 👍🏻
Hey Chris. Is it the same button for the zino pro? My button does feel strange. When I power it on it’s not staying on.
Does it feel soft and no click?
@@QCGUY yes. I don’t feel it clicking like it should. I just replaced my gimbal cable. ( thanks by the way) it was all good last night. I took it out today and all was good. Flew about 30ft away and it said lost connection and went into RTH and landed. It won’t connect. Then noticed drone was off. I tried to power on and it only makes half the music and shuts off. I tried 2 other batteries and same thing. I even tried to take the button cover off and press on the actual button under it. Same thing.
@@polkcraig4485 It’s likely the power button. They are the same for the pro and original Zino.
The last numbers on the board read 00038-01 if I recall.
Thanks, I’ll order one.
@@polkcraig4485 sometimes the power supply board under the main board will give you the same symptoms but if you’re button feels soft it’s likely the cause.