An (Almost) Full LED Conversion.... AND IT LOOKS SO GOOD!!

Поделиться
HTML-код
  • Опубликовано: 4 сен 2024

Комментарии • 57

  • @BJPLIFESTYLE
    @BJPLIFESTYLE  3 года назад +7

    If you’re not already subscribed......WHAT ARE YOU DOING!?!? Smash the sub button now it’s free and you’ll be notified when a new video goes live - every Monday, Wednesday, Friday at 3:00pm EST!

  • @buskey81
    @buskey81 9 месяцев назад +1

    The front done light lenses can be popped out way easier than pull down the whole assembly

  • @pmdoit
    @pmdoit 3 года назад +11

    Page 258 of the owners manual gives all the bulb types and their locations.

  • @SRT_Tom
    @SRT_Tom Год назад +3

    You don’t have to take that off😂 he doing the most 😂

  • @Codyy-u6e
    @Codyy-u6e 3 года назад +4

    Finally some good Jeep GC content! Definitely replace the reverse bulbs, makes a ton of difference reversing at night and it looks way better. I used the same brand of LEDs you used in this video for mine.

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад +1

      Thanks! Appreciate the love. Do you know if they’re the same size bulbs?

    • @xinfamouzstylezx
      @xinfamouzstylezx 3 года назад +1

      @@BJPLIFESTYLE I have a 2016 HA and it took 2 separate size bulbs, 921s and 7440/7443 I believe.

    • @Codyy-u6e
      @Codyy-u6e 3 года назад +1

      @@BJPLIFESTYLE 👆🏽 My reply haha. Same account, 2 usernames 🙃.

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад

      No worries lol I’ll look into the bulbs

  • @bryanmenjivar6909
    @bryanmenjivar6909 3 года назад +3

    You can turn off all interior lights with the light adjuster on the left side of the steering column. You have to dim it down you’ll feel it click and it won’t activate the interior lights when the doors are open.

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад

      I think that disables the front lights as well, no?

  • @redhoel
    @redhoel 3 года назад +2

    this was a nice video, i really enjoyed the part where you bought the lights and then put them in the car

  • @buren86
    @buren86 3 года назад +1

    The back push lights turn off when the doors are closed, and back on when you're driving if pressed. They turn ON automatically when you open any door and off after so many minutes.

  • @lebit4088
    @lebit4088 3 года назад +3

    you should try doing the galaxy roof in your car I want to do it but no one has a video of a jeep like yours with it!!!! I have a 2019 jeep grand Cherokee altitude.

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад

      I’ve been thinking about it for a while but I think I’m gonna wait for the upgrade 🤔

  • @Dmenace2178
    @Dmenace2178 3 года назад

    Led headlights just got here today gonna have to do backup next. Good video.

  • @Puggy124
    @Puggy124 3 года назад +1

    Also. Can you do an episode putting on wheel spacers/adapters? (they have different space sizes..1.5 inch should do it). Would like to see how it comes out and if it changes anything in the performance of the vehicle.. or would getting a set of negative offset wheels be better? Just read some negative things about putting spacers on your vehicle

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад +1

      Shhh I have a video coming next week hopefully involving wheel spacers lol

  • @michaeloliveira4060
    @michaeloliveira4060 Год назад

    Did you ever end out doing a video on the inside small back lights? Drives me crazy that those are the only lights on mine that aren’t led lol

  • @leyvaa
    @leyvaa Год назад

    Did you ever do anything with those middle lights? Same issue I’m having right now lol

  • @pmdoit
    @pmdoit 3 года назад +1

    LED backup lights are awesome. I did mine last week.

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад

      I'm going to do them soon, was one of the first mods on my truck and I loved it

  • @jeepdriver86
    @jeepdriver86 3 года назад +1

    Merry Christmas brother hope your day is wonderful love your Jeep by the way I am on my fifth Jeep Grand Cherokee I currently have a 2020 Jeep Grand Cherokee Laredo and love it

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад +1

      Merry Christmas to you as well! Appreciate the love

    • @jeepdriver86
      @jeepdriver86 3 года назад

      @@BJPLIFESTYLE definitely check my channel out sometime brother good luck the headlights they were a pain to do unfortunately they made it hard were they won’t you to bring it to the dealership not like the Rams though

  • @arniceousmaximus2183
    @arniceousmaximus2183 3 года назад

    The back interior lights are accessible behind the lens cover man. You need to use a special pry tool or a small standard screwdriver . Good luck changing them it's not too hard I swapped mine with the blue green as I mentioned before

    • @Streamin0
      @Streamin0 3 года назад

      Did you take the trim piece off? If so how do you get it back on!

    • @briahnacochran5529
      @briahnacochran5529 5 месяцев назад

      Do you have a video

    • @arniceousmaximus2183
      @arniceousmaximus2183 5 месяцев назад

      @@briahnacochran5529 no but I can make one . The blue led finally was invented by the 90's

  • @Puggy124
    @Puggy124 3 года назад +1

    Can you do an episode where you remove the front seat headrest? I bought some Headrest collars thinking the Headrest just pull out. But not the case..

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад +1

      Hmm, I’ll look into for you! It doesn’t just pop out?

    • @Puggy124
      @Puggy124 3 года назад

      @@BJPLIFESTYLE nope..

    • @pmdoit
      @pmdoit 3 года назад

      You guys need to read your owners manual, there is a hole in the underside where you insert a paper clip to release.

    • @Puggy124
      @Puggy124 3 года назад

      @@pmdoit yes. But you need to remove the back of the seat to unplug the headrest. There is a wire running through the headrest post for the headrest airbag.

    • @pmdoit
      @pmdoit 3 года назад

      @@Puggy124 hmmm, not on my 2016

  • @hampa07
    @hampa07 3 года назад +1

    Did you figure out how to change the back dome lights to LED?

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад +3

      They're soldered in so I suggest just covering them with matte black vinyl unless you use the rear lights.

  • @R0k3R0112
    @R0k3R0112 3 года назад +1

    I can replace the bulbs on back seats on my 15. Sucks Jeep do that.

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад

      Yeah it’s unfortunate, hopefully I have a fix for now

  • @MikeSmith-fq5dv
    @MikeSmith-fq5dv 3 года назад +1

    Why exactly did you have to cut that ribbon cable???

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад

      Unless you solder out the halogen bulb that it goes to the interior lights won't be a complete LED swap.

  • @waynebailey3010
    @waynebailey3010 3 года назад +1

    Do the led fade off like the factory lights do? And did you have to get Canbus bulbs?

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад

      No canbus bulbs, just those standard ones. What do you mean fade off like when you shut the doors?

    • @waynebailey3010
      @waynebailey3010 3 года назад

      Most all dodge chrysler keep cars fade the interior lights once the door is closed until they turn off or slowly dim until they turn off

  • @migggzzz23
    @migggzzz23 3 года назад +1

    Why did you cut the ribbon?

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад

      You can’t swap the smaller map lights unless you resolder them, so it’s easier to just cut it and have the main leds!

  • @dennismeisner4912
    @dennismeisner4912 3 года назад +1

    What year is the jeep

  • @PaulRJenkins
    @PaulRJenkins 2 года назад +1

    Cover the lights in the back with black electrical tape problem solved

  • @giakis73
    @giakis73 3 года назад +1

    Just watched your video and don't know why you pulled the whole center light rack. Just watched this ruclips.net/video/rHO3rT1LXvw/видео.html and it shows to remove the light cover from the outside.

    • @BJPLIFESTYLE
      @BJPLIFESTYLE  3 года назад +2

      You can’t disable the two soldered in map lights Unless you do that unfortunately!

  • @index6738
    @index6738 3 года назад

    Time to get better looking wheels. Too dark and meaningless.