2006 - 2008 Hyundai Sonata Headlight/Lamp replacement
HTML-код
- Опубликовано: 13 окт 2016
- Replacing headlight Lamp on 2006 Hyundai Sonata
In this Video I am replacing headlight bulbs on a 2006 Hyundai sonata
headlight assembly removal is not required. I removed for a better view and camera angle
these steps works for 2006 to 2009 Hyundai sonata and many other cars
share and subscribe if you find this video beneficial. 
Авто/Мото
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
Thanks for the great video. As you mentioned below, I didn't need to remove the headlight assembly to replace the bulb. I just unscrewed the bulb cover, disconnected the electrical, and pushed down on the keeper pin - no need to unscrew it. It's sticking out on the right and looks a bit like one end of a paper clip. I took a picture of it with my phone so I could get a better idea of how it worked, but I don't see a way to post it here. Then the keeper pin can be swung out of the way so the bulb can be removed.
Thanks for the tip dude !! Did mine in less then 10 lol
I have a 2008 and you don't have to pull the entire assembly out like that. You can unscrew the cap by just opening the hood and reaching behind the light assembly. All you have to do is unplug the power wire to the assembly and you can replace the bulbs without removing it.
Removing the entire assembly is definitely the way to go. The turn indicator is impossible otherwise so this is good practice.
Thank you so much , I don’t have anyone to teach me in my life
Need to explain how your undoing several parts in the headlight removal. You didn’t say a word, just did it. Kinda helpful but you should be more descriptive in what your doing.
Thank you so much for this video! You helped me with this project. God bless.
Glad was able to help
No tools necessary. Specific instructions: Open hood, locate the low beam headlight (Left: to the left of the Windshield fluid, Right: to the right of the battery), unhook the power cable, less than a quarter turn on the headlight cover to remove it, unplug the connector from the bulb, push in on the single end of the wire lock to disengage it, then replace the bulb! Close it up, don't waste time with tools or taking out the entire light fixture: it will only make things frustrating!
Did you even watched the video? didn't I say it's not NECESSARY to take the headlight out?
@@NWCI I'm watching this vidoe because I need to know how to remove the bulb. I have no interest in doing something that is not necessary. And when you removed the bulb all your viewers could see was your hand. Not helpful
Really great video. For a beginner like me, it was easy to understand and follow. Thank you for making this video.
Matthew Keeler , thank you for watching, we all start with small repairs and go from there.
you didnt mention keeper pin holding in bulb and where bolts were to take assembly out. other than that perfect!!
Carl Johnson , I couldn't film the keeper pin, I only have 2 hands lol. you can replace the bulb without taking assembly out, did it this way in case somebody wanted to swap headlights
Sorry, but I have to agree with Carl. If your going to make a how to video then at least explain about each part your undoing, unclipping etc. you did several things and didn’t say a word.
Hello friend, do you recommend LED bulbs for a 2008 Sonta GLS 2.4L?
I have a 2006 and all i have to do is open the bulb housing from behind the assembly. Just 2 screws holding them in. Not sure if any other models are like this.
Lots of cars are like that. I removed the assembly because it's easier to show it on camera that way.
Thanks for commenting
Can I use a 9007 ultra savania light bulb for my 2006 sonata?
is it necessary to remove the whole headlight assembly to just t replace the bulb?
Allen Harvey nope, removed it just to show how it looks like, or in case someone wanted to replace the headlight
cool because if it required all that I'd have to get someone else to do it. sucks having disabilities especially when you like doing things yourself
how did u use to take out first bolt I can't find anything to fit in there to get in between ac
sarah bowling it's not necessary to remove the entire headlight assembly so you should be able to change the bulb without needing to remove the screws. just follow how directions on the part of changing the bulb and remember to never touch the glass part of the light bulb
Ratchet extension
Glove.
Can't feel a thing with them on.
@@NWCI I’m talking about ultra-thin poly gloves you can feel everything through. The point is to not touch the glass at all. The oil from one’s fingers is enough to greatly reduce bulb life.
This does not work on our Sonata. The configuration of the headlamp is not like you are showing here. Ours is a 2006 although we have been told that it may have been a year ender model.
The clip is not come out
Ok.........I accidentally saw ur butt crack......not cool! But thanks for the tutorial!
Too hard to see.
Jalabar couldn’t see shit wth 🤯🤷🏾♂️
ANH621
superthecool, good job detective.
not good