Starting off 2023 with a tour of my MUGEN-ish Honda S2000

Поделиться
HTML-код
  • Опубликовано: 15 янв 2023
  • Links to all the parts and installs are below. Let's start the new year by establishing a baseline. I hope everyone watching this hits their goals for 2023. Best of luck! Hit me up on IG (@zaahid_rah) or leave a comment below if you have any questions about the build.
    Mugen SS Wing Install: • Mugen SS Wing Install ...
    Comptech Intake Install: • CT-Engineering Intake ...
    Ohlins Coilovers Install: • Öhlins Road and Track ...
    Renegade Short Shifter Install: • Does your S2000 need a...
    Spoon Mirrors Install: • Spoon Blue Wide Side V...
    Works Bell Short Hub and Quick Release Install: • God Hand mod? Honda S2...
    Mugen Catback Exhaust Install: • Mugen Titanium Exhaust...
    Mugen MS-Z Seats Install: • Can a semi-bucket Muge...
    #honda #s2000 #mugen
    Honda S2000 Mod List:
    Mugen MF10 Wheels
    Mugen Catback Exhaust
    Mugen SS Wing
    Mugen Steering Wheel
    Mugen MS-Z Semi Bucket Seats
    Ohlins Coilovers
    Spoon Rigid Collars
    Spoon X-Brace
    Berk HFC
    OEM CR Front Lip
  • Авто/МотоАвто/Мото

Комментарии • 64

  • @mickeyhartsell6096
    @mickeyhartsell6096 Год назад +1

    The Honda S2000 ROCKS

  • @johnsrey4421
    @johnsrey4421 Год назад

    Sweet ride

  • @Frenchyk
    @Frenchyk Год назад

    I love following the build man. It's your car so you build it how you want it. Congrats on hitting 1k subscribers. I'm claiming it!

  • @vincentcorona2117
    @vincentcorona2117 Год назад

    i love your videos, super well put videos and really entertaining! gives me so inspo not to give up on my s2000 !

  • @mushy18100
    @mushy18100 Год назад

    HydroPHILIC 👌🏼
    7:02

  • @champloogamingtv7447
    @champloogamingtv7447 Год назад +2

    I love the honesty about the spoon calibers😂, do what makes you enjoy the car

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      😂😂 yeah, man! You get it!

    • @ayowser01
      @ayowser01 Год назад +2

      The Spoon calipers will have the same bite as factory; it's the modulation and feedback where it outperforms. If you add giro disc rotors then you'll have a mini-bbk. PMU CR pads are also a good option for brake pads. That's the setup I use.

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      @@ayowser01 wow, thanks for the feedback. tbh, i felt a little guilty spending the money on the spoon calipers mainly for aesthetic purposes but its nice to know theres potential for better performance

    • @ayowser01
      @ayowser01 Год назад

      @Zaahid Rahman They definitely outperform the stock brakes. The drawback - in comparison to other larger brake kits - comes in the form of overheating. I only use my car for canyon driving and have yet to overheat them with this setup. I have overheated PMU HC800+ The calipers are definitely worth the coin. They retain the factory brake bias and you can still use oem rotors/pads- if you don't drive aggressively.

  • @derekb370z
    @derekb370z Год назад

    Making me want an s2k of my own even more keep up the content! Holds me over till I can buy one of my own

    • @zaahidrahman
      @zaahidrahman  Год назад

      thank you! i hope you get yours soon

  • @ayowser01
    @ayowser01 Год назад

    Nice s2k... you can't go wrong with anything Mugen!

  • @dsubversion
    @dsubversion Год назад +3

    Great plans, man. I recently found a video from LHT Performance that gave me some direction for a solid set of track brake lines from Goodridge. Search up this video, "LHT AIRBOX MOD and TRACK Prep". Godspeed!

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      Man, i love lht lol. Ill have to check that video out when i do the brake lines. Thanks for the suggestion!!

  • @Xxyion86
    @Xxyion86 Год назад +1

    love that shift knob. Had it on mine. You should get the Acuity shift collar to prevent the shift...bag?(lol) from sagging.

    • @zaahidrahman
      @zaahidrahman  Год назад

      that's a good idea. ill include one when I switch back to the stock shifter.

  • @alphabeta8403
    @alphabeta8403 Год назад

    Sup man, this is your older brother Zahid from another mother, in East Coast. Would love to touch base with you when I visit my family in SoCal later this year. Big S2K fan, proud owner of a 3G 6MT TL last 10+ years.

    • @zaahidrahman
      @zaahidrahman  Год назад

      Hahaha whats up, man. shoot me a message on IG @zaahid_rah and we can plan something when youre in town. In the bay area btw

  • @sakurakos88
    @sakurakos88 Год назад +2

    Great looking S2000, inspired me to buy some parts for mine also! I been thinking of getting the mugen ss wing also, but the fact that it requires drilling makes me second guess... I currently have the CR V3 wheels on mine but would love a set of the mugen mf10, think it would look amazing on my NFR (checking kingmotorsport everyday for updates ;)). Keep it up!

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      Everything looks good on nfr lol. Shoot kingmotorsports an email and they will keep you in the loop on mf10 restocks :)

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      Thank you!!

  • @johng81818
    @johng81818 Год назад

    Very beautiful car bro. I truly miss my AP1. I had to sell it a few years back because at the time due to financial difficulties. Thank God I got over that slum and now I’m doing much better off in life and because I wanted that open top S2k like drive experience again however without the manual this time because I’m older now and my knees are going bad so I decided instead to buy a brand new 2022 BMW Z4 M40i in Misano blue and I truly love every single thing about that car just like I did with my beloved S2000.

    • @zaahidrahman
      @zaahidrahman  Год назад

      Thanks!! The s2k is a great car but it sounds like you now have a great, upgraded replacement in your z4!

  • @danielmarcault5889
    @danielmarcault5889 Год назад

    Yeah there's a bad bad one in Roanoke too

  • @maxymillion7480
    @maxymillion7480 Год назад

    You might want to consider a proper diff as your factory one will go bang at some point, if you are doing any kind of decent motorsport with the car.

  • @createdbyNikko
    @createdbyNikko Год назад

    Your build is inspiring! Been watching for some time now, and each video I watch just makes me want to throw more money at my S. Quick question: how far out does the hub, quick release, and steering wheel push from the turn signal? Been wanting to throw an aftermarket wheel on, but do not constantly want to reach for my turn signal each time I use it.

    • @zaahidrahman
      @zaahidrahman  Год назад

      Theres about a 2.75-3 inch gap between the turn signal and the steering wheel. Ive never had an issue with accidentally hitting the turn signal. Not sure if thats what youre asking about but i can send you a reference pic if you message me on ig @zaahid_rah

    • @zaahidrahman
      @zaahidrahman  Год назад

      Thanks man! I appreciate you tuning in. Keep building that s2k :)

  • @canyonrun2565
    @canyonrun2565 Год назад +1

    Mita MF-10 replicas supposedly fit Spoon calibers.

    • @zaahidrahman
      @zaahidrahman  Год назад +2

      thats true but for $3k+ i feel like there are better options out there

    • @canyonrun2565
      @canyonrun2565 Год назад

      @@zaahidrahman yeah, look forward to what you go on Yahoo JP. I need to start checking it out too.

  • @Earmuffin585
    @Earmuffin585 Год назад

    All that money is into the build and cheap out on tires. Definitely recommend better tires. Beautiful S

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      Ehhh, i generally dont drive anywhere near the limit of these tires… I’ll upgrade tires after a little more seat time on track :) for now your boy is okay being slow lol

  • @Tony-ui8eg
    @Tony-ui8eg Год назад

    its a good think you brought up about the mf10 not for sale i was just going to message you lol

  • @thanosd6885
    @thanosd6885 Год назад

    Mugen mugen mugen

  • @jamesbarten2543
    @jamesbarten2543 Год назад

    I know you're using the NSX button, but for the mugen button, did you mock it up or anything? I'd love to be able to use my mugen button for my mugen wheel, but its too small by design and I think I need a button retainer ring or something. But I've never used one before so I'm not sure.

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      I actually never even tried to set up the mugen horn on the wheel. I have it sitting here in storage somewhere. ive been considering picking up the suede version before they discontinue it so i may try then.

  • @adeemmunir5494
    @adeemmunir5494 Год назад

    You make me want to start a RUclips Channel for my S2000s. Hmmmm...😍

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      hell yeah, do it!! we need more s2k content on yt

    • @adeemmunir5494
      @adeemmunir5494 Год назад

      @@zaahidrahman Maybe just maybe!!

  • @lotsatrix
    @lotsatrix Год назад +1

    I have an s2000 and it’s a bit old and worn, but I OVE IT! I just wanna know how the hell people afford these mods!?

    • @zaahidrahman
      @zaahidrahman  Год назад

      the s2000 has definitely aged well! dont tell my wife that these mods are expensive 😂

  • @johnconnor7501
    @johnconnor7501 Год назад +2

    What about the hardtop?

    • @zaahidrahman
      @zaahidrahman  Год назад

      good point lol. lucky for me, the OEM hardtop came with the car when i bought it.

  • @IcyDC5
    @IcyDC5 Год назад +1

    I think you forgot about the keyhole cover mod :)

    • @zaahidrahman
      @zaahidrahman  Год назад

      I knew i forgot something!!! 😂

    • @sakurakos88
      @sakurakos88 Год назад

      @@zaahidrahman And the mugen license plate bolts ;)

  • @johng81818
    @johng81818 Год назад +1

    One thing I would also suggest being one of your next mods since you’re planning on tracking it is get a Mishimoto aluminum radiator. Definitely want to upgrade your cooling system especially on hot track days.

  • @danielmarcault5889
    @danielmarcault5889 Год назад

    Yepers iz gonna put murel shape window hole in hard top .as ol style .and four gills ,kinda like bmws of time.and guess word is industrel high stock car wing spoiler .an dusters. They said openhood supercharger would not happen. .gearbox my like.ground effects same .fog lights so nice .wanted. Couple more sets. I think s mu is great place for this car. Dude like u said your wheels near best frickin love em..they gave me idea of shark .so I know it's out there .in that time .didn't buy vet .stang .comerro .t bird .spider! Or a frickin masda .or batmobile thing.didnt have time to order m5.catamaran was a little much at time .loonies wouldn't beleave in 18 year old.house ting that happen some years later .planes ect ..but I bout that little yellow cah.ha ha ha.

  • @RAS001
    @RAS001 9 месяцев назад

    Sebring Silver yea?

    • @zaahidrahman
      @zaahidrahman  9 месяцев назад +1

      silverstone

    • @RAS001
      @RAS001 9 месяцев назад

      @@zaahidrahman no kidding. The lighting really made it look more silver than grey. Dope!

  • @lotsatrix
    @lotsatrix Год назад

    Im curious about that hardtop. How much trouble is it to remove it? Does installing that top mean you lose the convertible/soft top?

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      Its an oem hardtop. It fits over the soft top while its in the down position. In order to use the soft top you must remove the hardtop. It takes two people to remove it comfortably.

  • @mojo_heezy
    @mojo_heezy Год назад

    You should name your next kid Mugen

  • @mojo_heezy
    @mojo_heezy Год назад

    I can bench more than you

    • @zaahidrahman
      @zaahidrahman  Год назад +1

      For my next mod, I will be taking steroids 😆