Morimoto MLED 2.0 Projector
HTML-код
- Опубликовано: 15 мар 2020
- Find All Lighting Upgrades For Your Car Or Truck By Entering Your Year, Make, And Model Here:
www.morimotohid.com/buyer-gui...
Morimoto BI-LED 2.0 Projector: www.morimotohid.com/morimoto-...
Output: We'll just start with the hotspot. It's on par with the Mini D2S 4.0 and an XB 45K Bulb / XB55 ballast, and about 20% brighter than its closest LED-based competitor: the i-lens. The Kuria optic clear lens and curved cutoff shield produce a beam pattern that's plenty wide, with an ECE-sloped cutoff that's super sharp, and colorful. Rather than off-the-shelf LEDs like early LED projectors in the aftermarket, the MLED uses a specially developed CSP chipset from Seoul SemiConductor. To top it all off, the "M" icon that's projected onto the ground thanks to the special foreground limiter is just plain cool.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Physically: It has a lot going for it too. The threaded mounting shaft can be removed from the projector to free up almost an inch of depth for those who don't need/want it. The integrated maglev fan is sunk into the heat sink, keeping space to a minimum without sacrificing the ability to stay cool. The wiring is clean, out of the way, and can be disconnected with ease. The precision and existence of mostly die-cast (rather than stamped) parts in the cutoff shield mechanism make for a slop-free setup and convey quality over cost savings. It could pass for an OEM part.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Simplicity: Forget about separate bulbs. Forget about big ballasts, or where to mount them. Forget about complex relay harnesses, and where to run them. Here, you've got the projector and a small external LED driver to regulate power and control its low and high-beam function. If you're a clutter phobe, or simply tight on space working on something like a motorcycle: the MLED is the way to go.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Easy to Install: On an H4-based headlight reflector for example...Remove the headlight lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the headlights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Worth it?If you want the latest and greatest, Yes. It is. Want to produce about the same amount of light output for your money? The Morimoto Mini D2S 4.0 is probably better for you - only because it's less expensive. But consider this: Yeah, the Morimoto M-LED projectors are expensive, but unlike an HID-based retrofit, you won't need bulbs, ballasts, in many cases a wire harness. You just need some shrouds, and that's about it! The rest is here.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Benchmark: Morimoto. The Automotive Lighting Benchmark. We are globally recognized as the brand to beat. No other brand blends performance and genuine product quality quite like us. Our vast product line has something for nearly every application, and if not; our R&D department is capable of producing it in short order. Contact us and learn what we can do for you!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Visit Us On Social Media!
Facebook: / morimotolighting
Instagram: / morimotolighting
Twitter: / hidmorimoto
TikTok: / morimotolighting
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Other Videos We Recommend Watching Here:
Difference Between Morimoto XB LED And XB Hybrid: • The Difference Between...
Morimoto 4Banger Technology: • Off Road Reinvented Mo...
Morimoto Backup Light Boost Bar: • One of the Best Back U...
Morimoto Golden Ticket: • These Headlights Will ...
Morimoto Retrobrights: • Chip Foose One of a Ki... 
Авто/Мото
Do you guys sell the led driver by itself
We do just give us a call. 424-239-5142
Do you guys sell replacement LED chips for when the LED eventually dies?
We do not, you have to replace the unit.
@MorimotoLighting That right there just lost my business lol. Great led bulbs though. My heart is hurt now 🥺
@@MorimotoLighting bruh
is it available for H7 connector or an adaptor available?
You can adapt the wiring!
Does the led have a lifespan? Is the bulb replaceable?
There is no bulb. Read the lengthy description carefully
No bulb, the lifespan of the LED is hard to determine, but they will last a very long time!
When is RHD available??
Not sure when/if the RHD version will be available, but we will keep you posted!
@@MorimotoLighting if? Does that mean you have no plans to release rhd anytime soon, surely it’s just making new cutoff? Or is it more involved than that
We have no plans at the moment, but we would like to release them down the road! Sorry about that my man!
@@wizzer1975 not sure how long ago they were released, but there is a rhd versioning the MLED 2.0 at the moment
@@JoeyLovesTrains released nearly a year ago mate, already bought and installed 👍
How to buy im from Indonesian
Email us at sales@morimotoHID.com and we’ll get you taken care of.
Is it available in India?
We ship worldwide!
Morimoto Lighting but is it available in RHD ???
@@AnikethSharma ye
Very loose threads at 0:18
I've used these plenty of times, they tighten down just fine.