I have been watching your RUclips videos for almost a year and I have come to the conclusion that you guys have far too much fun to call what you do a "job"! Keep up the great work.
Amazing collision footage, and the depth of field of the filming camera (trirotor) is astounding. If you freeze the right frame the styro cells in the Hadron are perfectly visible.
I'm seriously impressed by how durable that plane and how well it was built. If I wasn't in the middle of upgrading my 3d printer and repairing the apprentice this would be an awesome airplane.
I just got mine Saturday...but winds were too blustery to fly. You guys have gotten me psyched to get mine in the air. Just have to make sure the sky is clear of Swedes! ;)
if you guys want a good way to launch wings without cutting your fingers off, especially stuff like the x8 that can't be wingtip launched, try holding it with the stock launching points, run about 10 feet, throw, then once it's a few feet out of your hand you can begin to feed in throttle.
Great Video as always. I used to marvel at the in flight shots from the air and wondered how you did it. I now know you just have to go out and get a swede (a very special swede). I still marvel, the piloting all around is great but the air to air is still amazing. Thanks for the great stuff,
guys this is the best i cant believe how much this plane will take and keep flying and of course a super pilot dont hurt i just chew at the bit waiting for the next video from you guys makes me want to buy another speedkit. keep up the great work
You guys are great! I'm a freshmen in college with nowhere to put my nitro planes and a whole lot of open fields here! So i started my FT 3D build and "the beef" should be coming in tomorrow. Stay awesome guys :)
I love these kind of "classic review" episodes, like it was earlier, josh and josh, an interesting plane, fun and good tricopter air to air footage from david
12:10 do you mean flare? When you come in fast, and pull back on the elevator and bring the nose up and stall the whole plane at the same time before landing to slow down?
Lots of good ideas on this video. +1 for seeing more of Davids new copter (I smell some 3D printing going on) and the carbon Z cub looks like fun too. I don't know if it is in the works but a Frsky Taranis and a Hitec 9x radio review would be great. I am looking for a new radio with telemetry. Like many people out there I'm still working with DSM2 but I know I should retire it for a more reliable protocol.
The Devo series walkera transmiters 8s/12s with expanded 3rd party firmware gives usb interface controller along with transmission emulation of near every receiver platform.
So you're saying it's operator error? No other online shows who shoot in HD seems to have these problems. Just because you can video record with SLR doesn't mean you should. They aren't made for it specifically.
Flying this plane 3s makes it very tame, defiantly not a beginner plane by any means though! hahaha, I have had three strikers and I wanted something more so I got a killer deal one of these and decided to give it a shot. With a 4s I break 100 mph, its pretty damn scary to fly, I love it! It is way more fun than the striker in my opinion, its faster with a 4s by quite a bit and has way better flying characteristics, it flys more like an expensive jet. The vectored thrust is crazy, it is very acrobatic, really gets my heart racing when you go into the flat spins. It is also a very high quality plane and easy to repair. If you get it, get a 4s!!! its the best 50 bucks you will spend! :)
I wonder why there aren't full size people carrying aircraft being designed and built in a similar style? I realize that similar designs were built and flew in the 1940's and 50's and that they tended to be unstable but surely with modern technology any instability could easily be overcome and this model certainly looks stable enough for me to fly a full size version of it. I am a pilot and have been a test pilot in my younger years btw.
+Dan NZ I would think that the g forces involved in a real version of that little model would black the pilot out pretty fast. Would be one hell of a thrill though, I would think.
+Dan NZ it's to do with manufacturing costs the fuselage is of low cost to make since most of it is just rings covered with a skin to make it rigid you can produce that quickly, Take a look at a documentary showing a modern airliner being made, the tooling needed to shape one part of a wing is different from another although they follow the same principle where as the fuselage is a continuous shape much cheaper to make tooling since your producing more. that's before you take into account training of your workers as well. While an airliner is not the most optimal design in regard to flight characteristics and efficiency it is optimal for material and labour costs while still having a good carrying capacity. I'm not sure we'll ever see flying wing or lifting body designs in commercial applications since it's not cheap and in any business you want to have low costs obviously without wanting to compromise on safety and quality.
+Dan NZ I'm not sure either but it would be a hell of a sight if someone designed and built one. The closest plane to this design that i know of is the eurofighter but that's not a delta wing
Cool plane! I really like the way it looks and it appears to be really agile! The vectoring goes for some crazy boomerang style stunts! :) If I hadent just bought the Hobbyking Skipper for some winter flying I would have bought this right away, might still get one of these in the near future As always, great video guys!
I have owned a hadron for a couple years now, it's fun to fly. Goes pretty quick with the 4c. I used to have a F27Q Stryker and honestly I still prefer the Stryker. The Hadron is a bit heavy, harder to hand launch as a result. Slower roll rates in comparison to the Stryker. Both for intermediate flyers.
Review the Glasair Trainer with trainer software and the E-flite Apprentice with SAFE technology and tell us if there is anything different about the two training technologies.
Watching this six years late, but moved to comment on the landing. In 1972, a Hawker Siddeley Trident 1C on departure from London Heathrow entered a deep stall condition some three minutes after rotation. With no airflow over the control surfaces recovery was impractical at the altitude and the 118 souls on board perished.
The pushycat x75 looks real nice. From hobbyking. I wonder if it's nice to fly as well. I'm thinking of getting it as a second fun plane. Anyone have any experience with that one?
I’m not sure if anyone will read this, but that is a difficult aircraft to find. Does anyone know a Vectored Thrust Flying Wing that is comparable to the Hadron? Much appreciated to any leads. Namaste, 🙏🏼❤️🇨🇦
So true, It's a shame tho, that in the EU we have to pay so much in delivery and tax costs or sit and wait for another delivery that never comes to the EU warehouse
How about a DIY thrust vectoring motor mount for the scratch-build series? I like the idea of thrust vectoring but at $279.99(towerhobbies) it's wayy over my budget for this size of plane.
I'm fascinated with the try copter !!! I love my Stryker also and it's been discontinued :( epic fail man !!!... So I am buying the Hadron also. Great video guy's ;)
The Hadron collided with a tricopter, I repeat, Hadron collided with Tricopter, we have a Hadron Collider! :-)
Nice
LOL, Clever!
I have been watching your RUclips videos for almost a year and I have come to the conclusion that you guys have far too much fun to call what you do a "job"! Keep up the great work.
Amazing collision footage, and the depth of field of the filming camera (trirotor) is astounding. If you freeze the right frame the styro cells in the Hadron are perfectly visible.
I'm seriously impressed by how durable that plane and how well it was built. If I wasn't in the middle of upgrading my 3d printer and repairing the apprentice this would be an awesome airplane.
3:37 everybody NOSE that you're gonna break your nose!
4:37 a TIPical wingtip launch!
I just got mine Saturday...but winds were too blustery to fly. You guys have gotten me psyched to get mine in the air. Just have to make sure the sky is clear of Swedes! ;)
NOW WE ARE GETTING BACK TO THE FLITE TEST I KNOW AND LOVE!!! whoever changed the tempo.. GENIUS !!
So, there was a Hadron collision?
:>
If this plane were to bump into something, would you call it a Hadron collider?
LOL
Robert Palmore TROLLOLLOLLOLLOLLOLLOL.
Robert Palmore actually, it did collide with an object, but in that case, it would be called Hadron collided
xXBonzaïXx question is did it release a Higgs boson?
That joke would be much better if it where called the hadron glider 😂
Great
interceptor mission David! Great shots from the tricopter! Top notch production all around.
That was amazing. I love the swarm of multi-rotors around it on the ground. Love you guys. Rock on!
if you guys want a good way to launch wings without cutting your fingers off, especially stuff like the x8 that can't be wingtip launched, try holding it with the stock launching points, run about 10 feet, throw, then once it's a few feet out of your hand you can begin to feed in throttle.
Dear Flitetest,
I am a huge fan on your channel, and I would love you guys to create an episode on the E-Flite Carbon Cub full sized.
Thanks,
-Peter
The intro music always makes me smile and anticipating the entertainment to come.
Great Video as always. I used to marvel at the in flight shots from the air and wondered how you did it. I now know you just have to go out and get a swede (a very special swede). I still marvel, the piloting all around is great but the air to air is still amazing. Thanks for the great stuff,
Nice! Josh you just pulled of a "hadron collider"
Great video! But... how fast is it? On 4s? Clocked speed runs please...
I agree with FuttFel - having fun makes the vid fun to watch for the viewers. For me, the longer the episode the better for me!
Love all your videos. How much longer does David get to stay here?
guys this is the best i cant believe how much this plane will take and keep flying and of course a super pilot dont hurt i just chew at the bit waiting for the next video from you guys makes me want to buy another speedkit. keep up the great work
Good job Dave with the aerial footage!
Really do like watching flite test, very professional, comical, and just plain fun to watch. Josh & Josh very good host. Keep videos coming.
The trust vectoring was introduced on the E-Flite Carbon-Z Scimitar first. But i never seen this system on a little plane like the Hadron
Great flying, really like the vectoring and really fast plane as you said not a first plane.
Absolutely love the camera work.
how is this compared to the F27Q Stryker from parkzone? what is better? which has better flying characteristics?
I would really like to see the new E-flite carbon Z cub reviewed. Looks pretty spectacular
You guys are great! I'm a freshmen in college with nowhere to put my nitro planes and a whole lot of open fields here! So i started my FT 3D build and "the beef" should be coming in tomorrow. Stay awesome guys :)
have you guys tried the Taranis yet? i love it and you guys should check it out if you have not.
I love these kind of "classic review" episodes, like it was earlier, josh and josh, an interesting plane, fun and good tricopter air to air footage from david
I did watch the flite test beginners video just after this, which specifies full kits for under £80, i'll definitely look into it.
Love the air to air shots!
so doing all those tricks and stuff how does the battery last? that plane is bad ass! used to have a stryker :)
will we see some more of davids tricopter? looks like theres been some improvements made. relocated ESC's. Cover for board and video transmitter?
gracias admirando tu trabajo
i often wonder how many particular models sold of a particular model
would be interesting to know
12:10 do you mean flare? When you come in fast, and pull back on the elevator and bring the nose up and stall the whole plane at the same time before landing to slow down?
It´s no doubt, THIS PLANE ROCKS!!!!! Very Nice review!!! KEEP IT UP FLITE TEST TEAM!!!!!
Lots of good ideas on this video. +1 for seeing more of Davids new copter (I smell some 3D printing going on) and the carbon Z cub looks like fun too.
I don't know if it is in the works but a Frsky Taranis and a Hitec 9x radio review would be great. I am looking for a new radio with telemetry. Like many people out there I'm still working with DSM2 but I know I should retire it for a more reliable protocol.
The Devo series walkera transmiters 8s/12s with expanded 3rd party firmware gives usb interface controller along with transmission emulation of near every receiver platform.
"everything is screwed" lmao xD lol
PLEASE let's see more of that sweet tricopter!
speaking of the box, the box is HUGE! it's like the biggest box I've ever seen.
Hi, was flown in the video with 3s or 4s?
great flying! Maybe you guys could do some challenges with that airplane? Revisit some challenges!
So you're saying it's operator error? No other online shows who shoot in HD seems to have these problems. Just because you can video record with SLR doesn't mean you should. They aren't made for it specifically.
Can i change the motor and use one EDF?
Flying this plane 3s makes it very tame, defiantly not a beginner plane by any means though! hahaha, I have had three strikers and I wanted something more so I got a killer deal one of these and decided to give it a shot. With a 4s I break 100 mph, its pretty damn scary to fly, I love it! It is way more fun than the striker in my opinion, its faster with a 4s by quite a bit and has way better flying characteristics, it flys more like an expensive jet. The vectored thrust is crazy, it is very acrobatic, really gets my heart racing when you go into the flat spins. It is also a very high quality plane and easy to repair. If you get it, get a 4s!!! its the best 50 bucks you will spend! :)
EDIT, I have no idea. definitely NTM 35mm's but no idea which ones.
wow great shots
Where to get the helicopter online? I like it with the video footage that it took.
I wonder why there aren't full size people carrying aircraft being designed and built in a similar style?
I realize that similar designs were built and flew in the 1940's and 50's and that they tended to be unstable but surely with modern technology any instability could easily be overcome and this model certainly looks stable enough for me to fly a full size version of it. I am a pilot and have been a test pilot in my younger years btw.
+Dan NZ I would think that the g forces involved in a real version of that little model would black the pilot out pretty fast. Would be one hell of a thrill though, I would think.
+Nicholas Perrin Yes I would say so, but what a rush it would be :-)
+Dan NZ it's to do with manufacturing costs the fuselage is of low cost to make since most of it is just rings covered with a skin to make it rigid you can produce that quickly, Take a look at a documentary showing a modern airliner being made, the tooling needed to shape one part of a wing is different from another although they follow the same principle where as the fuselage is a continuous shape much cheaper to make tooling since your producing more. that's before you take into account training of your workers as well.
While an airliner is not the most optimal design in regard to flight characteristics and efficiency it is optimal for material and labour costs while still having a good carrying capacity.
I'm not sure we'll ever see flying wing or lifting body designs in commercial applications since it's not cheap and in any business you want to have low costs obviously without wanting to compromise on safety and quality.
+Dan NZ I'm not sure either but it would be a hell of a sight if someone designed and built one. The closest plane to this design that i know of is the eurofighter but that's not a delta wing
Cool plane! I really like the way it looks and it appears to be really agile! The vectoring goes for some crazy boomerang style stunts! :)
If I hadent just bought the Hobbyking Skipper for some winter flying I would have bought this right away, might still get one of these in the near future
As always, great video guys!
I have owned a hadron for a couple years now, it's fun to fly. Goes pretty quick with the 4c. I used to have a F27Q Stryker and honestly I still prefer the Stryker. The Hadron is a bit heavy, harder to hand launch as a result. Slower roll rates in comparison to the Stryker. Both for intermediate flyers.
Josh & Josh; Nice Hadron Plane Review & Flying & David good FPV work in the Air also ! Thanks for the Video !
Hey there FT, just wondering I would love to have a download to your intro music.
Thanks! 0:01 0:19
14:37 There is a second FPV shooting the tricopter FPV which is shooting the Hadron plane...
Is the Hadron available in the UK
Review the Glasair Trainer with trainer software and the E-flite Apprentice with SAFE technology and tell us if there is anything different about the two training technologies.
Watching this six years late, but moved to comment on the landing. In 1972, a Hawker Siddeley Trident 1C on departure from London Heathrow entered a deep stall condition some three minutes after rotation. With no airflow over the control surfaces recovery was impractical at the altitude and the 118 souls on board perished.
What do you guys think about the air force quadcopter collaboration thingy? Autonomous quadcopters would be epic!!!
This craft has been discontinued now but, some parts are still available for it. It is a shame I think this would be a nice FPV trick wing.
Please do a review on the axn clouds
prefer this scenario, by far the best for your reviwes
The pushycat x75 looks real nice. From hobbyking.
I wonder if it's nice to fly as well. I'm thinking of getting it as a second fun plane.
Anyone have any experience with that one?
The Hadron is the first plane I bought and flew!
the f27q does the boomerang without any thrust vectoring
I’m not sure if anyone will read this, but that is a difficult aircraft to find. Does anyone know a Vectored Thrust Flying Wing that is comparable to the Hadron? Much appreciated to any leads. Namaste, 🙏🏼❤️🇨🇦
So if you build a big machine that smashes these together, would it be called a Large Hadron Collider?
We want to see David's improved tricopter!
It looks similar to the "Anycopter Tri" on the store section of the flitetest website.
So, how many actual kamikaze hits(Kills) strictly on FT vids does this Swedish Red Baron have????? Accidental or intentional?????
I want to buy one but I don't see a link
What are the motors david is using on his tri?
Why is there always a light spot around the tricopters shadow?
were u guys flying with a 4s in that video
+survivalist Scott 4:18 3S
please tell more about the 3dr solo
AHHHHH a new flitetest!!!!
What is the first thing that you did whit that plane
You need to review the electrifly Rifle 1M
I wish FT released 3 episodes a week on Mon, Wed, Fri, instead of just 2 on Mon, and Wed!
What tricopter is he flying in this? It looks pretty mean,
I see you have got alot of new transmitters
Good move David upgrading graupner e-props they totally just saved that tricopter.
Amazing! Now imagine a Multiplex Funjet Ultra with a vectored thrust.
I always see this at the local hobby shop, but it looks so intimidating in it's big box.
do a review on the Skywalker!
Awsome takes from that tri copter verry cool!
whats the name of the vid where he crashes and recover plane from the radio mast?
Is that not the House where FinalGlideAUS flies sometimes?
It is. Its Kapper's house.
you have a hero3+? it looks like
may have to get one !
So true, It's a shame tho, that in the EU we have to pay so much in delivery and tax costs or sit and wait for another delivery that never comes to the EU warehouse
oh yeah,nice plane,i like flyzone's stuff,i have the acro wot also,and just put a kda 36-16 motor in it.
love you vids jj allways great to watch
Liv the way u guys present! Keep the reviews coming!
How about a DIY thrust vectoring motor mount for the scratch-build series?
I like the idea of thrust vectoring but at $279.99(towerhobbies) it's wayy over my budget for this size of plane.
I can't comment much on the hand launching techniques, but I hate people who throw a frisbee the way you suggest in the video. ;)
....I could have A MESS OF FUN with this thing!!! :D
I'm fascinated with the try copter !!! I love my Stryker also and it's been discontinued :( epic fail man !!!... So I am buying the Hadron also. Great video guy's ;)