Meet The Adorable Dancing Robot 3D Printed OTTO | How To Make Otto Robot
HTML-код
- Опубликовано: 14 июл 2024
- JLCPCB For the new registers can get $54 coupons now! and Our 3D printing service starts at $1 : jlcpcb.com/3d-printing/CYY Extra $5 Off by Promo Code: JLC3D
Hello, I have created this otto robot. let's see how to 3D print, assembly, features and some errors that i have faced while building this otto Robot. This is a project you can do on your own and it's a great way to learn how to use 3D printing and Arduino to make cool 3d printed robot.
If you're interested in learning more about 3D printing and robotics, then this is the video for you! This is a project that you can do on your own and it's a great way to learn how to use 3D printing and Arduino.
Otto 3d printed robot
how to make Otto robot
3D Printed ROBOT
3d printed Arduino projects
Arduino Projects 2023
.
Chapters:
Intro: 00:00
3D Printing: 00:19
Components: 01:13
Assembly: 01:44
Coding: 05:23
Working: 06:25
SponsorAD: 08:36
Error: 09:05
.
Otto Website: www.ottodiy.com/
Arduino IDE Software: www.arduino.cc/en/software
OttoBlocky Software: www.ottodiy.com/software
Otto Libraries/Codes For Arduino:
drive.google.com/drive/u/0/fo...
.
Otto Robot 3D Model, Components, Codes..-
3delworld.com/how-to-make-ott...
.
Things Used In Videos-
Arduino Nano Every (Single Board): amzn.to/3qCydvA
Nano I/O Expansion Sensor Shield: amzn.to/3Prqwmv
Ultrasonic Module Distance Sensor: amzn.to/3K0KVMd
AA battery: amzn.to/3N7BMlb
9 Volt Cell Rechargeable Batteries: amzn.to/3Jak1QU
HC-06 Bluetooth 2.0: amzn.to/3HRgmWQ
5V Active Buzzer: amzn.to/3p4ktsY
SG90 9G Micro Servo 180°: amzn.to/3Cpdaz9
Breadboard Jumper Wires 20cm: amzn.to/3PaEg4K
Latching Push Button Switch: amzn.to/43zNv2F
Breadboard Jumper Wires: amzn.to/3IeOKfE
9 Volt Cell Rechargeable Batteries: amzn.to/3xfknPP
.
Follow us on:
Instagram: / 3delworld
.
For Business Queries:
3delworld@gmail.com
.
► Music Credit:
Podcast Background Music While Talking Interview - Free Music to use, No Copyright - TALK#1
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Music promoted by Copyright Free Music - Background Music For Videos bit.ly/31OjyRA
.
#3dprinter #3dprinting #3dprintingtimelapse #3dprintingus #3dprintinggermany #3dprintinguk #3dprintedotto #robotics #arduino #robot - Развлечения
You can use 12v two Barrie's
You have connected the 6v battery setup to 5v pin.
You must try by inputting the battery to the VIN pin
great video you really cover all main topics, thanks for sharing! #OttoDIY
Glad you liked it 😊, Thank you for this amazing project. If you have new updates on this please comment down, I will pin the comment, it will help new users #OttoDIY 😊
@@3DELWORLD thanks a lot we are working on a new project of Otto, we will let you know the details and maybe sent you a sample so that you can test in your channel if you want.
❤very nice 👍🏻
Glad you liked it!
Use a 16340 battery and battery shield and connect to switch and then +5/gnd on nano shield
Thanks for suggestion mate, I'll try that 👍
search for my video called "OttoTest using 16340 Charger Board" and you'll see board.. connect to +5v/gnd on nano shield@@3DELWORLD
The problem here is not voltage but current, try making a 3.7+3.7V using two batteries and then make again 7.4V source like before then wire them parallel and then try with the battery !!....It will work
And tell me After it works, I'm quite curious
He'll make a nice Minion
Yess 😄
its good project but The code and library link you shared does not work
how to do this project w/o servo shield?
Bro my the app shows device is connected but if i touch something but the otto not respond
Can we make it with esp8266
Sir, how to i solve the battery problem
I can’t download the app on iPhone what should I do?
App not control
CONNECTION DIAGRAM?
Couldn't it be done with an esp32 much cheaper?
You can get a clone Nanov3 and shield for under $5
Greetings, I'm making this robot for an upcoming school exhibition. I want it to be app controlled (bluetooth, basically) I've got almost all the sensors compatible with this project. Please guide me with the connections and coding. I'm using otto blockly for coding.
Greetings, good to hear that you are making this robot for a school project😊👍 make sure while using AA or 9V battery, I am getting less power from it.
All the connections, components, coding... you will get here : 3delworld.com/how-to-make-otto-robot/
OTTO official website: www.ottodiy.com/
@@3DELWORLDplease give me the code link in description
Code link not working. man
Bro Does it take a long time to upload the code??????
Need a quick reply🥺
Nope bro, it takes a few seconds to upload code via Arduino IDE
@@3DELWORLD Oh my bad i fixed it thank you bro
But in caliberation zip file/extract/examples/sensor code is showing an error msg "D5" and can you share a clear circuit diagramme🎉
His brother is EMO :)
Yes, Elder Brother 😆
Sir i want coding file not working
Hello bro can you please send me the 3d printing design of this robot ??
Hey bro, you can download STL files from here: www.printables.com/model/31955-otto-diy-build-your-own-robot
Why are you saying otto as octo????????
github?
its good project but The code and library link you shared does not work