Hey I wanted to do this but the only issue I have is that the way you ran it it’s only partially using a load when you torque it because the diameter of where the lug nut for the spacer was is bigger than the stud and I can’t imagine that with time it will crack .
it depends on youre wheel setup as long as it centers out in the middle of the rim then its fine. its basically the same as running a 30 offset so instead of 45 offset OEM you add 15mm spacer which makes it a 30offset.
What to put some placers on my 2015. I want 15mm Front and 20-25mm rear with Factory 20" wheels. I've seen this video and your install of extended studs. My question is if I use the extended studs. Will I be able to use my Factory lung nuts? I noticed in this video you mention opened ended nuts. I would prefer to use factory to keep it clean. If you could give me some advise, I'd appreciate it!
Well you would have to find a tire that has the same circumference as your old setup. So if you had a 17" wheel, and upgrade to an 18" wheel, you will need to compensate for that 1 inch difference, but having 1" less of sidewall. I find it very easy to calculate any wheel measurements by going on 1010tires's website, and using their calculators. If you need help with that, click this: ruclips.net/video/0WCHHR8Lhes/видео.html
Hey man I've been watching your videos you seem very knowledgeable in many areas.my concern is I have a G-Body regal I have 22 inch wheels I got the spacers with the studs are not long enough on the spacer.. Am i able to just press out existing and press in new extended studs..? and I'm having major clearance issues somebody told me to get spindles that raise the vehiclein the front and better extended shocks in the rear or I was told a possible coilover system would do it..? I'm lost man 10 different people say ten different things what do you think in both of these areas I'm grateful for a response thanks.
This guy is 23 years old... or 90 years of experience! great videos man much support from homies from Algeria!
Thanks buddy!! Cheers :)
This was very helpful dude. I thought about doing this, wasn't sure if it would work. I have the same exact situation.
Hey I wanted to do this but the only issue I have is that the way you ran it it’s only partially using a load when you torque it because the diameter of where the lug nut for the spacer was is bigger than the stud and I can’t imagine that with time it will crack .
Have you heard anything about wheel spacers shortening the life of your wheel bearings?
it depends on youre wheel setup as long as it centers out in the middle of the rim then its fine. its basically the same as running a 30 offset so instead of 45 offset OEM you add 15mm spacer which makes it a 30offset.
LOVE TOUR VIDS KEEP UP THE GOOD WORK😄😄😄😄
Dude you just saved me a lot of money. Great info/video..SUBSCRIBED
Idealy cant you just change the studs from 5x100 to 5x114.3?? I know they might be a little different but can't you just drill it out a little bit
What to put some placers on my 2015. I want 15mm Front and 20-25mm rear with Factory 20" wheels. I've seen this video and your install of extended studs. My question is if I use the extended studs. Will I be able to use my Factory lung nuts? I noticed in this video you mention opened ended nuts. I would prefer to use factory to keep it clean.
If you could give me some advise, I'd appreciate it!
I have one of my spacers with two bad studs. May I just hammer it out and hammer a new one in?
w8tng for a give away man 😃. but literally ur videos help me alot
I'm waiting for the play button to come in lol When it does, i'll be giving away the dash cam :)
I have a 22 inches rims 6 lugs form a infiniti qx56 ...want to adapt to a infiniti qx70 with 5 lugs pls give a fid back
Is it possible to press the studs on the other holes in order to flip the bolt pattern?
If they were both the correct diameter for the stud, yes you could, however they typically are not.
I love all of your videos bro ... 👍🏼👍🏼
Keep it up man... Supporting for ya 😄
What do you think about bolting to spacers together and then Mountain to the hub let me know what you think
thumbs up for u my man! keep it up
Cheers buddy!! :)
informative, but when possible, purchase wheels with the required applications offset. especially in a race application
I'm with you 100%, but yet again, there are many times where race cars will use wheel spacers
Hey big fan of your channel.. I was wondering what size of spacer will work for my honda delsol to make the Wheels flush with the fenders
My advice to you would be measure the distance from your tire to the fender, and find that size wheel spacer :)
What will be the price?
hey man how's the golf doing? havent seen a video of it in a good while!
You'll see it soon :) We're working on a few things for it lol
milanmastracci looking forward to it man! recently got myself a gti so more videos will be awesome
Another great vid bro
Thanks buddy!!
hey milan when i upsized my wheel maintaing same hieght ... my turning radious increased ... how can i achieve my old one
Well you would have to find a tire that has the same circumference as your old setup. So if you had a 17" wheel, and upgrade to an 18" wheel, you will need to compensate for that 1 inch difference, but having 1" less of sidewall. I find it very easy to calculate any wheel measurements by going on 1010tires's website, and using their calculators. If you need help with that, click this: ruclips.net/video/0WCHHR8Lhes/видео.html
Well Said Milan!
Keep it up Buddy! :D
Hey man I've been watching your videos you seem very knowledgeable in many areas.my concern is I have a G-Body regal I have 22 inch wheels I got the spacers with the studs are not long enough on the spacer.. Am i able to just press out existing and press in new extended studs..? and I'm having major clearance issues somebody told me to get spindles that raise the vehiclein the front and better extended shocks in the rear or I was told a possible coilover system would do it..? I'm lost man 10 different people say ten different things what do you think in both of these areas I'm grateful for a response thanks.
how is your mini going？
Good :) The next few videos will be of the mini
milanmastracci does it effect fuel efficiency?
Aluminum spacers ? I heard thise ain't safe 🤔
The only time they aren't safe is if they when they aren't installed with the use of a torque wrench
Tj hunt should use this method for his 350z how do I tag him to this vid
Steven Seenarine Is he really too stupid to think about this method?
first to comment and shared and liked your video
Thanks buddy!! :)
i dont think this is safe.
Why not?
Hey Milan can please move on you have done like 15 episodes on wheels an wheel spacers we haven't seen something new
Don't you worry!! I've got stuff coming
Can't wait to seeing it... Thanks a lot for the respond
😳😳😳😳
this is so not safe
How..?
games is life head ass stay with computers
Fernando Ramirez smd cuz
u dumb nigga saying wheel spacers are un safe how millan did it
Fernando Ramirez hahaha you calling me dumb but I sure know more things about car then you do you fan boy 😂😂😂😂😂
second to comment