sir ask ko lang nagkaroon ng knocking sounds 2e engine ko eh kagagawa lang po nito last jan.sir ano kaya naging reason sir?since nagawa siya puro warm up lang siya mga march ko na ginamit para mamalengke tapos after nun nagkaroon na ng knocking sounds..
replaced oil filter and oil pump did the big-ends new oil. Car sound soft to the ear, went about 10 km and oil light go on and she sound like somebody is hammering inside the engine. Smoke balling out the exhaust when come to a stop street, whilst driving no smoke. Tappets and head-gasket all new. What could be the fault
I have a problem with my corolla..2e engine..I think it's the oil pump..the low oil light in the dash is on, and suddenly my engine is so noisy. So I stopped using it, and will have my mechanic change the oil pump. I really think it's the oil pump, coz the sender is good, and my engine was ok before it happened.
@@playstation2bigs sir, anu po possible reason kapag hndi maikot yung crankshaft pulley? inalis ko po timing belt, then inikot ko yung camshaft, ok nmn. yung crankshaft lng ang hndi, kahit kunti at pabalik. thank u po.
FOR THE VIEWERS: YOU MUST PRIME THE PUMP BEFORE REINSTALLING OR IT LIKELY WILL NOT PUMP OIL!!! All that music and no clue about priming, good grief!!! You can pack that star cam area void with some light grease that doesn't deteriorate rubber and should have good results.
Hi. you must place drive rotor and driven rotor into the pump body with the marks facing the front (black point).
Ano daw tagalog dude hahaha
great video. I needed refresher on applying rtv. Thx
THANK YOU FOR THE VIDEO REALLY HELPS ME A LOT FOR THE IDEA TO REMOVE THE SPROKET
sana mawala kalansing ng oto saka nag bblink na oil indicator tuwing naka idle papalit nako oil pump salamat sa video mo sir
Baka o ring ng oil pump lang ang papalitan, kalimitan ganun
Very nice video but that music is terrible.
Also maybe it would help if you show how to install the new pump....
Easy to install just put the bolt in order, never mix the bolt. It must be in order
Your welcome dude :)
Hi does it have any timing marks. nag rebuilt ako engine kaso ayaw u,akyat ng oil. pls advise. Thanks
That pump is quite weared out. Need replacement.
@@audiokees4045 yes, old engine
Whats the torque settings for those bolts
No idea, just experience
sir ask ko lang nagkaroon ng knocking sounds 2e engine ko eh kagagawa lang po nito last jan.sir ano kaya naging reason sir?since nagawa siya puro warm up lang siya mga march ko na ginamit para mamalengke tapos after nun nagkaroon na ng knocking sounds..
Marami pwede dahilan yan paps, pwede rin loose valve clearance (malaki gap)
@@playstation2bigs pede ba kita message sir para masend ko video ng sounds ng engine.
san may surpusan nian oilpum 2e
looks similar to the 4e oil pump .. is the all need to seal around inside of the pump not evverwhere where the bolts are?
just follow the video
replaced oil filter and oil pump did the big-ends new oil. Car sound soft to the ear, went about 10 km and oil light go on and she sound like somebody is hammering inside the engine. Smoke balling out the exhaust when come to a stop street, whilst driving no smoke. Tappets and head-gasket all new. What could be the fault
Incorrect bearings sizes fitted, or clogged oil gallaries. As to smoke, not sure. Could be valvestem seals
or rings
did you take off the timing belt when you took of the oil pump? how many hours to take and replace the oil pump/seal?
yes i removed the timing belt
I have a problem with my corolla..2e engine..I think it's the oil pump..the low oil light in the dash is on, and suddenly my engine is so noisy. So I stopped using it, and will have my mechanic change the oil pump. I really think it's the oil pump, coz the sender is good, and my engine was ok before it happened.
damn music
Good eve po. yan po bang tinanggal mo yan n ang oil pump mismo? o nka kabit sa makina? ty
Oil pump ng 2E yan
@@playstation2bigs sir, anu po possible reason kapag hndi maikot yung crankshaft pulley? inalis ko po timing belt, then inikot ko yung camshaft, ok nmn. yung crankshaft lng ang hndi, kahit kunti at pabalik. thank u po.
Pwede ba alisin oil pump kahit hindi idrain engine oil?
Oo naman, walang lalabas na langis
FOR THE VIEWERS: YOU MUST PRIME THE PUMP BEFORE REINSTALLING OR IT LIKELY WILL NOT PUMP OIL!!! All that music and no clue about priming, good grief!!! You can pack that star cam area void with some light grease that doesn't deteriorate rubber and should have good results.
3e = 5e ?
2E
can i install a 3e block adapted to 5e
@@coby7424 3e and 5e never existed here, sorry no experience for that 2 engine
helo - you now how diameter is the ο-ring in milimeter -thank you
Nope sorry
puede b makabili nian
or you can easily remove the sprocket while the timing belt is installed
more silicone I think.
that music bro lol isn't this educational video ? why you are not explaining about problems
nice video but would have liked to hear you explain Dude. thanks
Saan ka nakabili genuine parts sir
Banawe quezon city
My voice have third party content (copyright)