Man I love my Scx6. Bone stock it is pretty incredible. The only mods I have done one mine is Fine Laser body mounting system, Vitivon pan hard bar mount, and 3Brothers Anti-foams. It's great not needing the clips to mount the body. The plastic pan hard mount was caused inefficient steering. The Anti-Foams turned it into a effective crawler. Up hill, down hill, and side hilling way better.!!! Great looking rig Fran!!!🤘🤘🤘
I purchased the SCX6 Jeep, I love it. It is a beast. Thinking about just getting the body for the honcho. I use parallel batteries, and your going to need the V2 hobbywing programmer. Never ever use 4s batteries. It will slowly melt the grease in the transmission, and it will burnout over time. Your transmission will start to leak first, and then it will drain.
Steady Foams or 3Brc foams are a must. I have both and I think the Steady Foams actually fill the Proline Hyrax better than the 3Brc foams. That said, one set is $45 and the other is nearly a $100. If you're not gonna drive in wet conditions, I'd go with the Steady Foams and never look back. I installed a slightly better steering servo with a 10amp BEC and I have all the steering I need. This is probably my favorite truck.
my scx6 jeep is still hands down my favorite impulse buy. my only regret is not having the honcho version haha... incredible truck, went almost 3 months on the stock servo even though it's complete garbage, and then another year without any maintenance (finally stripped some wheel hexes and front axles fell apart). i need to get some proper steering parts now that I have an RS2500 NSDRC servo in it now but this thing never skips a beat. my favorite thing to do is strap my 10 scale to it, then my 18/24 scale to the 10 and drive them to a crawler spot, everyone gets a kick out of it hahaha
Had my Jeep for over a year now. My buddy has had his a couple of months longer. Apart from a scale aerial on mine and a custom painted body for his, they are totally stock and have performed faultlessly and still amaze me with what they can do considering the weight . Tempted to convert to the honcho body Love the look
I absolutely love mine. I added the clippers front body mount and the rear body hold open devices. Changed a little bit on the battery. Trays need to upgrade the servo some better tire foam and tires definitely help but with very minimal changes this thing is a beast.
Fantastic!! So many details an so big! Two things in my opinion: 1 portals....2 Spray black inner body (before white than black) and paint interiors. Ciao, Nanni
The 6 Honcho is definitely one of my favorite rigs to wheel..for its size, it’s super capable out here (PLBTF location is my local wheelin spot). Swampers & dual stage foam, a handful of Samix parts..dropped the cg a bit with softer (orange) springs & moved the lower shocks to the links (without any cutting)..pulled the box & spare tire, also..the ESC can be tuned with the Spektrum program box. Still on the stock servo (after correcting the slop with the panhard it’s still hanging in there)..no issues so far, but I do have a 5th scale servo on deck just in case..picked my 6 up in late Oct last year..only broke 2 parts on it since I’ve owned it & I’m not easy on it by any means lol..sheared a cross-pin in a front axle shaft & snapped the rod end on the servo link (my rowdy driving caused those parts to fail)..its a beast..solid rig for sure!😎🤙
The servo has plenty of power. Change the panhard mount as it flexes too much not letting the servo put all the power down. I have the SCX6 Jeep & the Honcho. They are so much fun! I also love my 1/8 scale Traction Hobby Cragsman Raptor pro which wheels so much better than a 1/10 scale. If you like crawlers you need to check out the Traction Hobby 1/8 scales. It's a happy medium between the 1/10 & 1/6 scale crawlers. When people see the scx6 at the crawler course they are shocked at how big it is in person, lol.
At the end of the day, it's about the terrain and crawling buddies. If you have big rocks and terrain and friends with the same scale vehicle, this can really pay dividends
Dream crawler right here, absolutely love big rc's, its just something about them that makes them that more exciting. Only thing is bigger = more expensive lol dont expect to own one of these for a long time unless a miracle happens. Great unboxing though, lots of useful infomation!
to me part of the fun is the portability and easy to find places to crawl. with a beast like that i would always need a real car to carry it and in a small european city is already hard to find good spots for a 1/10, cant even imagine for a 1/6. Also, the bigger the harder it is to find challenges to crawl, for example a pillow is huge for my scx24 and a little bump for my ftx ravine with 150mm wheels...
Thank you looking forward to seeing it out on the rocks. I wasn’t interested in the JLU version & 1100$ is a lot for a RC. But you get more then your moneys worth. Once I saw the Honcho version I knew I have to get one. I have a upgraded Honcho 1:10 scale so I was happy when they came out with this. I’ll probably get one in Spring or early summer.
My roommate has both of the SCX6s, and barely taken them out after he had to have them! The Honcho I don't think has made it out of the house outside of the box.
@@RCReviewChannel they don't break on bumps, they break when you let it roll down the hill like it's a 10th scale. If I could do it all over again I'd upgrade the front shock tower to aluminum to address the upper pan hard mount flex before buying a Servo.
When I first saw the scx6 jeep,I was skeptical as I thought it was just a gimmick and didn't expect axial to continue with it so I didn't bother getting 1. Now that axial is continuing this scale and brung back the honcho of all trucks,I was really excited and now I definitely want 1 but in tan,lol. It'll be interesting if they decide to expand the 1/6 line and make say the gladiator,capra or even the wraith. As for the body,I heard if you remove the d-rings in the rear,the body will fully flip open
I would like to say to anybody wanting the JLU Jeep version, mine has gone down the side of a mountain and off a cliff 2 times now and everything was perfectly fine.
The first guy I saw riding his SCX6 around in the driveway on Facebook, I said: "I'll take things I do while my wife is talking to others guys on the Internet for $200, Alex." The dude got really offended. Lol
I work at a hobby shop and we have a demo SCX6. A Traxxas TRX 4 High Trail will out crawl it. A High Trail’s axles are higher, and the center of the truck it higher…combined with a shorter wheelbase. My recommendation is to get a TRX4 High Trail and spend the other $550 on upgrade parts.
Not a good comparison 10th scale vs 6th straight axles vs portals, there will always be something that out performs another type of crawler and the scx6 is more of a trail rig out of the box. Its for people that want a large scale rc. If they want supurb crawling performance im sure they know what to get at this price point.
thankyou for an excellent informative upload! am thinking of one of these. The problem is both colours aren't exactly great. May get the sand one and weather it a LOT. Do you reckon it would look better darker? 👍🍺🇬🇧
Love your channel! At first I wanted to buy a Honcho. Then why spend $1100 on a RTR when you have to spend another $500 on parts to run it more than once? For the amount of money spent on this truck I can buy two Vanquish VS4-10's and still spend a lot less money. Seems like Axial really needs a redesign of the Honcho.
Honestly I’m not a fan especially at it’s price, I bought the redcat marksman for $320. I know it’s not as big but honestly a lot better deal, but thanks for sharing.
I definitely like it better than the jeep version lol. Either the videos don't do the steering angle justice or maybe it doesn't turn very sharp I can't tell
1500$ for us Canadians 😩 just on the verge of justifying its price point, it'll hurt the bank a tiny bit but I think the rig well worth the money considering how much all of us spend on upgrading other rigs, my scx10 is sitting at 1000$ with the purchase of the truck itself, I could have a scx6 if I just saved the money going into a scx10
This new Holmes one: www.avantlink.com/click.php?tt=el&merchant_id=4b85b2b7-558e-4304-89fc-54958c8f47f0&website_id=6aadfba8-608a-4c0f-ae8f-fb73def65fa3&url=https%3A%2F%2Fwww.amainhobbies.com%2Fholmes-hobbies-bls-hv2000-1-5-scale-high-torque-servo-high-voltage-hhb230100024%2Fp1475472 I haven't tried it but his reputation is legendary
OK I am a little confused here, is this V2 of the Honcho, or V2 of the SCX6? My issue would be that we only stock the V1 with spectrum running gear, which I am not a fan of. So I am assuming the V2 has the rebadged Hobbywing Can and ESC which is more favorable for me. If it's V2 of the SCX6 with differences of bodies and they both come with rebadged HW gear, I am cool with that. I am only wanting one to walk the dog lol. Also how can I make this run at 120 mph? (joking)
Little miffed @ Axial for not telling us the dimensions of the trucks, on their site states 852mm L, it's actually 770mm They should amend this and stop having people think it's much bigger.
hmmmmmmmmmmmmmm? whelp I know wear my next paycheck is gunna go............. am I being financially responsible HELL NO...... but as they say ya gotta FU##$K AROUND TO FIND OUT! haha also great videos KEEP UP THE GOOD WORK CHEERS!
If I'm already paying $1100, the steering servo should NOT be a disappointment and had better be able to take the bumps and abuse of the trail and rock climb. Give me quality servo(s) for that price. And even Redcat was smart enough to give you a body stick to hold up their body on the Gen8. But it's a great looking vehicle.
Very true. I have the Jeep version. I bought it used and the first thing I did was swap the servo. The money I saved buying it used I’ve put back into it and then some making it good. I will say it’s one of my favorite rc trucks now. The Jeep body is a pain to take on an off. The honcho looks way better in that area.
The servo works great for crawling. It's the plastic panhard mount that flexes and doesn't let the servo put down the power. It's one of the Best servos to come with a RTR vehicle all of them are crap. You wouldn't be buying any RC car if the servo is what's holding you back. Everyone who owns an sxc6 will tell you it's the panhard bar mount, not the servo that's weak. Francis doesn't know that yet but he will after reading all the replies to this video.
I fixed the flex with a brace on the axle and new shock towers and I still wasn’t happy with the servo. It was ok but when I needed the torque it didn’t have enough.
@@FarmerFpv Not True at all. I have a Redcat Gen8, Remo Hobby Honcho, and a LAegendary Grando for 3yrs, I've put more than 50 battery packs thru each of them and I haven't had a single problem with their steering servos; I haven't had to replace a single one and they are considered the 'cheaper' alternatives. I know that everything eventually breaks, BUT if I'm paying over $1100, you had better give me quality. And spare me the "companies are in it to make money" speech. I already know this.
I definitely like it better than the jeep version lol. Either the videos don't do the steering angle justice or maybe it doesn't turn very sharp I can't tell
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Support RC Review by buying through our links:
Axial SCX6 Honcho unboxing and test
Axial SCX6 Honcho - alnk.to/7Bc5oEX
Axial SCX6 Jeep - alnk.to/6Tx3tp7
Hobbywing Motors - alnk.to/aLFJ3mZ
Holmes Hobbies 1/6 scale servo - alnk.to/5F7KBL3
Proline dual-stage foams for SCX6 - alnk.to/2QtCUGA
Axial SCX6 parts - alnk.to/dAjQKr9
Nice 👌 video good!!
Man I love my Scx6. Bone stock it is pretty incredible. The only mods I have done one mine is Fine Laser body mounting system, Vitivon pan hard bar mount, and 3Brothers Anti-foams. It's great not needing the clips to mount the body. The plastic pan hard mount was caused inefficient steering. The Anti-Foams turned it into a effective crawler. Up hill, down hill, and side hilling way better.!!! Great looking rig Fran!!!🤘🤘🤘
Great ideas, espeically those anti-foams. Grea application for that technology!!
why did they not make the panhard mount metal.?!
Thank you for the shout out! Anybody interested in the clipless latches I make can check them out on my channel!
I’ve got dozens of miles on the wrangler and its been a beast every inch! Such an amazing rig
Adventure is measured in miles with these big boys!!
I purchased the SCX6 Jeep, I love it. It is a beast. Thinking about just getting the body for the honcho. I use parallel batteries, and your going to need the V2 hobbywing programmer. Never ever use 4s batteries. It will slowly melt the grease in the transmission, and it will burnout over time. Your transmission will start to leak first, and then it will drain.
Steady Foams or 3Brc foams are a must. I have both and I think the Steady Foams actually fill the Proline Hyrax better than the 3Brc foams. That said, one set is $45 and the other is nearly a $100. If you're not gonna drive in wet conditions, I'd go with the Steady Foams and never look back. I installed a slightly better steering servo with a 10amp BEC and I have all the steering I need. This is probably my favorite truck.
my scx6 jeep is still hands down my favorite impulse buy. my only regret is not having the honcho version haha... incredible truck, went almost 3 months on the stock servo even though it's complete garbage, and then another year without any maintenance (finally stripped some wheel hexes and front axles fell apart). i need to get some proper steering parts now that I have an RS2500 NSDRC servo in it now but this thing never skips a beat. my favorite thing to do is strap my 10 scale to it, then my 18/24 scale to the 10 and drive them to a crawler spot, everyone gets a kick out of it hahaha
Had my Jeep for over a year now. My buddy has had his a couple of months longer. Apart from a scale aerial on mine and a custom painted body for his, they are totally stock and have performed faultlessly and still amaze me with what they can do considering the weight . Tempted to convert to the honcho body
Love the look
I absolutely love mine. I added the clippers front body mount and the rear body hold open devices. Changed a little bit on the battery. Trays need to upgrade the servo some better tire foam and tires definitely help but with very minimal changes this thing is a beast.
I’m so stoked you got a 6, can’t wait for future videos on it. Would love to see you get the Jeep version as well.
Thanks!
Fantastic!! So many details an so big! Two things in my opinion: 1 portals....2 Spray black inner body (before white than black) and paint interiors. Ciao, Nanni
@Braxton Right, good observation. Thanks. Ciao, Nanni
The 6 Honcho is definitely one of my favorite rigs to wheel..for its size, it’s super capable out here (PLBTF location is my local wheelin spot). Swampers & dual stage foam, a handful of Samix parts..dropped the cg a bit with softer (orange) springs & moved the lower shocks to the links (without any cutting)..pulled the box & spare tire, also..the ESC can be tuned with the Spektrum program box. Still on the stock servo (after correcting the slop with the panhard it’s still hanging in there)..no issues so far, but I do have a 5th scale servo on deck just in case..picked my 6 up in late Oct last year..only broke 2 parts on it since I’ve owned it & I’m not easy on it by any means lol..sheared a cross-pin in a front axle shaft & snapped the rod end on the servo link (my rowdy driving caused those parts to fail)..its a beast..solid rig for sure!😎🤙
The servo has plenty of power. Change the panhard mount as it flexes too much not letting the servo put all the power down. I have the SCX6 Jeep & the Honcho. They are so much fun! I also love my 1/8 scale Traction Hobby Cragsman Raptor pro which wheels so much better than a 1/10 scale. If you like crawlers you need to check out the Traction Hobby 1/8 scales. It's a happy medium between the 1/10 & 1/6 scale crawlers. When people see the scx6 at the crawler course they are shocked at how big it is in person, lol.
Traction Hobby 1/8... we'll look into that. There's also a new Cross-rc 1/8 that looks interesting
I would love one of those. I don’t really have the terrain to justify it, but it still might happen one day.
At the end of the day, it's about the terrain and crawling buddies. If you have big rocks and terrain and friends with the same scale vehicle, this can really pay dividends
I've been contemplating buying this for a while now but I'm finally going to get one this month!
Very cool to see you got one. I'm gonna get one by the summer time. It's really grown on me.
I seen it up close and what scared me way more than the price was the slight bent rear differential. Still plan to own one eventually.
I've been wanting an SCX6 since the Honcho body release, just haven't got one yet...but I will get one, very cool truck, thanks for showing it off!!!!
Dream crawler right here, absolutely love big rc's, its just something about them that makes them that more exciting. Only thing is bigger = more expensive lol dont expect to own one of these for a long time unless a miracle happens. Great unboxing though, lots of useful infomation!
Bigger is better if one has the room, the wallet and the muscles to carry them.
to me part of the fun is the portability and easy to find places to crawl. with a beast like that i would always need a real car to carry it and in a small european city is already hard to find good spots for a 1/10, cant even imagine for a 1/6. Also, the bigger the harder it is to find challenges to crawl, for example a pillow is huge for my scx24 and a little bump for my ftx ravine with 150mm wheels...
well said my man
Thank you looking forward to seeing it out on the rocks. I wasn’t interested in the JLU version & 1100$ is a lot for a RC. But you get more then your moneys worth. Once I saw the Honcho version I knew I have to get one. I have a upgraded Honcho 1:10 scale so I was happy when they came out with this. I’ll probably get one in Spring or early summer.
Very cool. This has upped the game of th SCX6
I have a custom SUV body im gonnz put on this scx6 chassis!!! Cant wait!
"This REVERSE SUCKS" -Fran
🤣... you cracked me up when you said that lol. Great review man. We appreciate it 👍
Rrrright? Shooting from the hip right there with some honesty. I mean I gave it 3 chances. :)
My roommate has both of the SCX6s, and barely taken them out after he had to have them! The Honcho I don't think has made it out of the house outside of the box.
The stock servo is fine for most people. The problem is the Panhard mounts flexing under load.
I see, I see. Great tip. Some folks reported the servo main bearing breaking on big bumps. Lots of weight and no servo saver.
@@RCReviewChannel they don't break on bumps, they break when you let it roll down the hill like it's a 10th scale. If I could do it all over again I'd upgrade the front shock tower to aluminum to address the upper pan hard mount flex before buying a Servo.
The SCX6 platform is amazing and will be the new standard as opposed to the 1/10 scale. Once you drive one, it's difficult going back.
It's ok but it will always be a niche market because it requires new courses, a big space and tons of money!
When I first saw the scx6 jeep,I was skeptical as I thought it was just a gimmick and didn't expect axial to continue with it so I didn't bother getting 1. Now that axial is continuing this scale and brung back the honcho of all trucks,I was really excited and now I definitely want 1 but in tan,lol. It'll be interesting if they decide to expand the 1/6 line and make say the gladiator,capra or even the wraith. As for the body,I heard if you remove the d-rings in the rear,the body will fully flip open
Just push in on the spare tire as you open up the body and the hinge will swing all the way open allowing the body to set clear out of your way
This is a really fun car. I was unsure if I wanted to drop this kinda money but I really enjoy driving it. Feels different. How I was 1/4 scale lol
I would like to say to anybody wanting the JLU Jeep version, mine has gone down the side of a mountain and off a cliff 2 times now and everything was perfectly fine.
That sounds great!!!! I think it was the very early bodies that were cracking.
Great video as always! 🛻🪨⛰🌳🌲🐐
Im not a crawler guy. But that thing could definitely convert me.
The first guy I saw riding his SCX6 around in the driveway on Facebook, I said: "I'll take things I do while my wife is talking to others guys on the Internet for $200, Alex." The dude got really offended. Lol
Great video mate 👌🏼
I work at a hobby shop and we have a demo SCX6. A Traxxas TRX 4 High Trail will out crawl it. A High Trail’s axles are higher, and the center of the truck it higher…combined with a shorter wheelbase. My recommendation is to get a TRX4 High Trail and spend the other $550 on upgrade parts.
Not a good comparison 10th scale vs 6th straight axles vs portals, there will always be something that out performs another type of crawler and the scx6 is more of a trail rig out of the box. Its for people that want a large scale rc. If they want supurb crawling performance im sure they know what to get at this price point.
Wow! big boy NICE TOY! I like.
That is awesome!!!
I love my SCX6 Honcho! Are you sure you don’t want me to send you a hood latch and my body holders to check out :)?
I love mine so much that I gave it away.
love your reviews great truck its on my to get list
Right on! Thanks bud
Put a 4s on the battery mount on the back of the chassis with a strap. Then you have room for two 3s on each side. That way you can crawl forever.
Maan, I might have not legs for that.
Sweet!
thankyou for an excellent informative upload! am thinking of one of these. The problem is both colours aren't exactly great. May get the sand one and weather it a LOT. Do you reckon it would look better darker? 👍🍺🇬🇧
Love your channel! At first I wanted to buy a Honcho. Then why spend $1100 on a RTR when you have to spend another $500 on parts to run it more than once? For the amount of money spent on this truck I can buy two Vanquish VS4-10's and still spend a lot less money. Seems like Axial really needs a redesign of the Honcho.
I believe the 2 battery mounts were keep it balanced
Sure, these batteries are tiny though relative to the vehicle weight. Or they should have included a parallel y-cable.
Does this come with the 2nd gear installed already?
lol "definitely not meant for indoor tabletop crawling...
Uh , guess not, when it's the size of the table 😉
Honestly I’m not a fan especially at it’s price, I bought the redcat marksman for $320. I know it’s not as big but honestly a lot better deal, but thanks for sharing.
Can you recommend a battery , cheap, mid range, and top shelf price, please?
I definitely like it better than the jeep version lol. Either the videos don't do the steering angle justice or maybe it doesn't turn very sharp I can't tell
Yeah, can definitely see some improvement
10:04 "Definitely not for indoor tabletop crawling"
I'm sorry, that sounds like *QUITTER TALK*
True dat. Definitely going to persevere next time!!!!!
It be cool to have you as a neighbor....
Haha, they look at me each day with envy and maybe disdain :)
@@RCReviewChannel pay no mind... that they have no idea us RC guys are the coolest dudes on this planet 😁 keep having fun....👊🏼🤠
If I had the budget for 6th scale this would be the SCX6 I would consider, unless they had an SCX6 Capra when I do.
oooh... scx6 Capra would be cool.
4:58 what the heck do they need a toroidal inductor here for? Back EMF from the BLDC? Or is that just a fancy zip tie?
1500$ for us Canadians 😩 just on the verge of justifying its price point, it'll hurt the bank a tiny bit but I think the rig well worth the money considering how much all of us spend on upgrading other rigs, my scx10 is sitting at 1000$ with the purchase of the truck itself, I could have a scx6 if I just saved the money going into a scx10
Latch kit will hold up the body
are the lights a seperate kit or does it come installed on the Honcho?
They come installed. And that is cool!
What servo would you recommend on upgrading to for the steering?
This new Holmes one: www.avantlink.com/click.php?tt=el&merchant_id=4b85b2b7-558e-4304-89fc-54958c8f47f0&website_id=6aadfba8-608a-4c0f-ae8f-fb73def65fa3&url=https%3A%2F%2Fwww.amainhobbies.com%2Fholmes-hobbies-bls-hv2000-1-5-scale-high-torque-servo-high-voltage-hhb230100024%2Fp1475472
I haven't tried it but his reputation is legendary
OK I am a little confused here, is this V2 of the Honcho, or V2 of the SCX6?
My issue would be that we only stock the V1 with spectrum running gear, which I am not a fan of.
So I am assuming the V2 has the rebadged Hobbywing Can and ESC which is more favorable for me.
If it's V2 of the SCX6 with differences of bodies and they both come with rebadged HW gear, I am cool with that.
I am only wanting one to walk the dog lol.
Also how can I make this run at 120 mph? (joking)
Nvm, video explained it all, Honcho is v2 which I am happy with.
Change the tire foams out to 3 brothers anti foams so much better.
I hope they fixed the leaky transmission my sons had fluid leaking out of his. We took it apart and sealed it with rtv silicone nice and dry now
Little miffed @ Axial for not telling us the dimensions of the trucks, on their site states 852mm L, it's actually 770mm
They should amend this and stop having people think it's much bigger.
I run mine on 6s with no issues
Nice! Upgraded esc?
I hope to find one lightly used
lightly, not slighly :)
Gently?
PlZ TRAXXIS MAKS A 6TH SCALE TRX4
🥰🥰🥰🥰🥰🥰🥰
I love it’..but no mony 😂
at that price they cant even put a nice and fast mount and release sistem of the body, no portals.....
Yep. The buy in is just the beginning like every other RC
This price needs to lower with this new economy. Sell it at $799 and make money on a cool upgrades!!!
hmmmmmmmmmmmmmm? whelp I know wear my next paycheck is gunna go............. am I being financially responsible HELL NO...... but as they say ya gotta FU##$K AROUND TO FIND OUT! haha also great videos KEEP UP THE GOOD WORK CHEERS!
The foams are not good, servo is not good, check the pins in the front axles come loose and can damage the upper and lower ball joints.
Most definitely agreed.
It's going to take at least a 40% off sale to make me support their efforts. WAY to expensive for what it is.
I think most folks are in the same boat. Over $1000 makes this a luxury item. Adds up to $1500 way too quickly.
The body is but ugly, it should have been a full size pickup body.
This body is about performance, strength and that comp look.
If I'm already paying $1100, the steering servo should NOT be a disappointment and had better be able to take the bumps and abuse of the trail and rock climb. Give me quality servo(s) for that price. And even Redcat was smart enough to give you a body stick to hold up their body on the Gen8. But it's a great looking vehicle.
Very true. I have the Jeep version. I bought it used and the first thing I did was swap the servo. The money I saved buying it used I’ve put back into it and then some making it good. I will say it’s one of my favorite rc trucks now. The Jeep body is a pain to take on an off. The honcho looks way better in that area.
The servo works great for crawling. It's the plastic panhard mount that flexes and doesn't let the servo put down the power. It's one of the Best servos to come with a RTR vehicle all of them are crap. You wouldn't be buying any RC car if the servo is what's holding you back. Everyone who owns an sxc6 will tell you it's the panhard bar mount, not the servo that's weak. Francis doesn't know that yet but he will after reading all the replies to this video.
I fixed the flex with a brace on the axle and new shock towers and I still wasn’t happy with the servo. It was ok but when I needed the torque it didn’t have enough.
@@FarmerFpv Not True at all. I have a Redcat Gen8, Remo Hobby Honcho, and a LAegendary Grando for 3yrs, I've put more than 50 battery packs thru each of them and I haven't had a single problem with their steering servos; I haven't had to replace a single one and they are considered the 'cheaper' alternatives. I know that everything eventually breaks, BUT if I'm paying over $1100, you had better give me quality. And spare me the "companies are in it to make money" speech. I already know this.
agreed. it's a cool rig but it needs to be done. the motor/esc is definitely the standard it should follow
Congrats. Sent you an email
I definitely like it better than the jeep version lol. Either the videos don't do the steering angle justice or maybe it doesn't turn very sharp I can't tell
It wasn't that sharp box stock.