Get an awesome FlexiSpot standing desk for your workspace! Use my code “24BDYTB50” for extra $50 off on the desk E7 Plus! FlexiSpot E7 Plus Standing Desk: bit.ly/3yxMFsD (US) bit.ly/3R5hJGI (CAN) FlexiSpot Ergonomic Chair C7: bit.ly/4byEACT
How exciting it is to see a well established RUclipsr such as yourself downloading my lense files for the Honcho! I hope you really enjoy them. Super stoked that you found them. 👍🏼👍🏼
First, your Mom did amazing !! So cool when you can involve family ! Very cool truck, the mods are so well done, and good to see the 3D printed details ! It's a lot of work, setting up a print farm, but whatever you set your mind to, I'm confident you can make it happen ! You are one of my favorite reviewers, I like your style ! You are never pushy, rude, or condescending to anyone.Thanks for the great review !
Cool, I put on the Mickey Thompson Baja pro, lightbar on the roof and run it on 4S , it’s a blast. You almost need to find different places to go because things that a 1/10 scale struggles with, this thing just rolls over . Different driving experience for sure , have fun with it !! 👍
That beast is a, er, a beast! Great to see your mum having a go. 😎 My elder adopted sister also likes to have a go with the Traxxas Summit, that I never seem to get to drive recently! Her favourite driving style comes from the fact that she's never driven any real vehicles. So she mostly just pulls the trigger, (I've set it in low), and see if anything gets in the way, ⛰ then she reverses. Oh yeah, and she also likes to drive it at the base of an old sand cliff at the beach. And by "at" I mean straight at the bottom of the cliff and up and over, slowly, until the front flips right over and it lands back on it's wheels again, then she reverses and does it again! Just like a big kid, 'sept she's 82. . .😂
Awesome video 💯 You detailed the SCX-6 the way Axial should have out of the box, it looks so cool, Mom really is a great driver, you guys just may have started something🤔
This thing will make a size queen out of you! It did to me at least 🤣🤣🤣 I got the Jeep the day they were released and couldn't help myself when the Honcho was on sale last Christmas. I finally got my Bambu X1C dialed in so I want to start printing parts for the 6. I just did a really cool cantilever and servo on axle conversion on my Ascend Fusion. The only thing I recommend out of the box at a minimum is a direct power or 8.4V servo, the stock one is a huge let down, and just run it on 4S. Don't forget to set end points or you'll destroy your steering setup, ask me how I know!
Welcome to the Hocho club. Your Mom is awesome and it's easy to see the apple didn't fall far from the tree;-) If it hasn't already been stated, here some necessary upgrades to further enhance the performance and enjoyment of this platform. Aluminum front shock towers and hubs to keep that dang panhard mount from flexing, 2) Steady Foams or a printed insert for the tires, 3) overdrive ring and pinion for the front axle, 4) heavy wheels....i know, i know it's already heavy, but that low weight is a big help, 5) an upgraded steering servo will be a must in the near future. Lots of options out there but I chose the Holmes 1/5th scale servo because it puts out more torque than most other offerings and is considerably cheaper. Also pick up at least a 10amp BEC to run that new servo. Have fun and keep the wheel side down.....whenever possible;-) P.s. there are many other tire options out there as well if you want more grip while going vertical.
I had more than a blast getting to meet you at JJs, I hope the crawler treats you well and I can’t wait to hopefully meet up with you again and film some crazy content! I can’t believe you already printed those cool parts and you’ll definitely have to teach me how to use a 3D printer!!! Keep it up girl! 🤟
These rigs are so much fun, in fact so much fun I’ve bought 2 over the last couple years …..Honcho and the original Jeep,JLU I’ve modified the heck out of the first one (Jeep…hated the body mounting process so I bought a kit to install the hammer rey body) I’m sure you’ll be modifying yours over time…ya can’t help it! 😂
I love my SCX6. The only problem I'm facing is : it's hard to find a space to store it in my limited RC space at home, and also as a man in a wheel chair I'm facing difficulties to carry it and handle it. With a little help from my kids, I really enjoy riding it every time and I love it more and more
Great Video 👌💯. Having an eye on the SCX6 for a while now and after watching this i want it even more 😂. Have a good one and keep on crawling 🤜🤛🤘. Also your mom did a great job driving it 👌💯
A friend of mine has the Jeep version. Definitely a lot of fun to drive. He upgraded the steering servo to a 100kg servo (I can't remember the brand), but it has some serious steering power!
Hi Hayley, what an awesome looking rig!!! (been thinking of getting one for myself 😁). The plates are looking great on the truck, so glad that you like them! Nice work on the frames you made for them too. And your "mini me" is just the right size and fit as well. I've seen your "contour graphic" on a few of your rigs now and I gotta say, it really is a nice touch. Well done! Cheers, Dan 😉
What do you mean.. kinda looks like you, I think it's spot on! Agree on the quick snap system - saw some for the Early Bronco after I bought it (on the sale, like I've seen a lot done) they are definitely handy!
First thing i broke on mine was the panhard bar end at the shock tower. Exocaged has a good setup for it that has worked for me. i just uploaded a short of mine climbing the board of truth...lol
A guy I know who has one said a steering servo Vitavon billet wheels with Pro-Line Hyrax tyres and better anti gravity inserts and it is light and day different way better, have been buying bits and pieces for when I get one.
Yes still on my wish list, along with a few parts from VITAVON for all things billet alloy, yes the Honcho appeals more than the Jeep although I have just ordered th Rlaarlo RC 1/7th scale MK07 Jeep, I can also see a 3D printer in my stars as I get frustrated with looking for any parts I want, so the Honcho may get gazumped yet again. I would have had one if it had not been back ordered hebce the Rlaarlo purchase which has good reviews on YT plus so much cheaper under £500 here in the UK. I do get frustrated by how many cool parts are 3D print only so only access to the printer required but a lot of us do not have access. Love the tables another wish ilst item hmm.
Great video!!! You aer a bad influence!!! I watched you video about the Creality 3d printer and that helped me make my final decision and now I want this GIANY CRAWLER!!! Ouch to my wallet!!! Great job keep it up!!!
I'm gonna use the radiolink rc8x with a TBS crossfire antenna and the caddx FPV avatar hd system. I just got a gimbal for the tiny avatar camera system so hopefully it will be a lot more stable video feed than when I first tried it.
:09 I have been wanting you to get one of these for a long time! lol. glad you got it, looks like I have to order a another topo design from ya to put on mine. I have the tan body and want the red-orange one though. great vid EDIT: I have the grey JLU Jeep SCX6 also.
Love your vid on the scx 6 honcho I’m saving up for one but starting to get upgrades, I really like the 3D printed accessories but difficult to buy also can’t see how to buy the wing mirrors any help much appreciated I’m uk based thankyou
Do you have a clip less body mount set for the SCX10 lll Bronco? I have been looking for a bit now and haven't found one that I like. P.S. love the 3d printed You for your driver.
Wish had more options diffs ext for price should fly looks nice wonder traxxas thinking 🤔 they could let rest come out then beat them for few years probably
Lady! 💯☝🏾⏰❤️ it can pull a full size car wen there is shims on the spools! I use mine to pull my pile of rocks/bolders on my big dog six wheel rc4wd trailer, the trailer has yoga brick for tire inserts and a old granddad clock springs cut heat bent to shape for leaf spring suspension 😂👌🏾… the solar flares are booming ☝🏾☀️⏰☝🏾☀️🎯⚖️🌌the great revel of secrets!
Wow nice toy .... Im freaking so jealous u made some stuff with 3d printer made look much better .,.. it been ages for me i used go gas powered car and truck now this is way better then before .,...
Aren't they just the absolute best!?!? It's definitely one of my top three favorites. I post shorts of mine. Check it out sometime and as always, another great video from you.
Get an awesome FlexiSpot standing desk for your workspace! Use my code “24BDYTB50” for extra $50 off on the desk E7 Plus!
FlexiSpot E7 Plus Standing Desk: bit.ly/3yxMFsD (US) bit.ly/3R5hJGI (CAN) FlexiSpot
Ergonomic Chair C7: bit.ly/4byEACT
❤❤❤ Please Giveaway This RC Car 😊 & Delivered Me 😊
How exciting it is to see a well established RUclipsr such as yourself downloading my lense files for the Honcho! I hope you really enjoy them. Super stoked that you found them. 👍🏼👍🏼
Aw thanks! I'm so grateful to everyone who designs prints and makes them available to the community.
@@RCGirlcan you please review mk07 please 😊
Man am I old this hobby has changed dramatically since I was a kid!
First, your Mom did amazing !! So cool when you can involve family ! Very cool truck, the mods are so well done, and good to see the 3D printed details ! It's a lot of work, setting up a print farm, but whatever you set your mind to, I'm confident you can make it happen ! You are one of my favorite reviewers, I like your style ! You are never pushy, rude, or condescending to anyone.Thanks for the great review !
Aw thanks! 🤙🏼
Two thumbs up for MOM! way to go!
what a awesome truck and your personal details are great good job 😊😊😊👍👍👍👍
Cool, I put on the Mickey Thompson Baja pro, lightbar on the roof and run it on 4S , it’s a blast. You almost need to find different places to go because things that a 1/10 scale struggles with, this thing just rolls over . Different driving experience for sure , have fun with it !! 👍
Great video!
You'll have to get your Mom an RC for mothers day and you guys can go out together
The steering servo in my SCX6 lasted three and a half batteries. I upgraded it and I freaking love my SCX6.
What servo did you go with?
@@RCGirl I probably went overboard and installed a Reefs Beast 2000. So far, I’ve had zero issues. I also run the servo and my SCX6 on 4S.
I love crawling the coast on the pnw! Such fun elements to crawl. Great video
That beast is a, er, a beast! Great to see your mum having a go. 😎 My elder adopted sister also likes to have a go with the Traxxas Summit, that I never seem to get to drive recently! Her favourite driving style comes from the fact that she's never driven any real vehicles. So she mostly just pulls the trigger, (I've set it in low), and see if anything gets in the way, ⛰ then she reverses. Oh yeah, and she also likes to drive it at the base of an old sand cliff at the beach. And by "at" I mean straight at the bottom of the cliff and up and over, slowly, until the front flips right over and it lands back on it's wheels again, then she reverses and does it again! Just like a big kid, 'sept she's 82. . .😂
Awesome video 💯 You detailed the SCX-6 the way Axial should have out of the box, it looks so cool, Mom really is a great driver, you guys just may have started something🤔
This thing will make a size queen out of you! It did to me at least 🤣🤣🤣 I got the Jeep the day they were released and couldn't help myself when the Honcho was on sale last Christmas. I finally got my Bambu X1C dialed in so I want to start printing parts for the 6. I just did a really cool cantilever and servo on axle conversion on my Ascend Fusion. The only thing I recommend out of the box at a minimum is a direct power or 8.4V servo, the stock one is a huge let down, and just run it on 4S. Don't forget to set end points or you'll destroy your steering setup, ask me how I know!
Awesome crawler! And your mini RC Girl driver is super cool! Nice work…
Welcome to the Hocho club. Your Mom is awesome and it's easy to see the apple didn't fall far from the tree;-) If it hasn't already been stated, here some necessary upgrades to further enhance the performance and enjoyment of this platform. Aluminum front shock towers and hubs to keep that dang panhard mount from flexing, 2) Steady Foams or a printed insert for the tires, 3) overdrive ring and pinion for the front axle, 4) heavy wheels....i know, i know it's already heavy, but that low weight is a big help, 5) an upgraded steering servo will be a must in the near future. Lots of options out there but I chose the Holmes 1/5th scale servo because it puts out more torque than most other offerings and is considerably cheaper. Also pick up at least a 10amp BEC to run that new servo. Have fun and keep the wheel side down.....whenever possible;-) P.s. there are many other tire options out there as well if you want more grip while going vertical.
I had more than a blast getting to meet you at JJs, I hope the crawler treats you well and I can’t wait to hopefully meet up with you again and film some crazy content! I can’t believe you already printed those cool parts and you’ll definitely have to teach me how to use a 3D printer!!! Keep it up girl! 🤟
I thought you already knew how to 3D print!! Where have those X-maxx parts been coming from?
These rigs are so much fun, in fact so much fun I’ve bought 2 over the last couple years …..Honcho and the original Jeep,JLU
I’ve modified the heck out of the first one (Jeep…hated the body mounting process so I bought a kit to install the hammer rey body)
I’m sure you’ll be modifying yours over time…ya can’t help it! 😂
Super nice of you to kit out your mom's new rig. 😝
hahaha!!
I love my SCX6. The only problem I'm facing is : it's hard to find a space to store it in my limited RC space at home, and also as a man in a wheel chair I'm facing difficulties to carry it and handle it. With a little help from my kids, I really enjoy riding it every time and I love it more and more
love your creativity! Think I would go for the JLU but this one looks totally sick :)
Awesome truck! Your mods to the truck are so cool! I love your channel and your videos, RC Girl!
Love all the scale details you added! Super well done!
Hi Hayley from UK 🇬🇧 Excellent video all round, fun and informative .Respect for you and your Mom ❤❤
She does look justice you. That's crazy
Very cool !!! I'd love to get a scx6 wrangler.
Cool truck, good vid! The original 1/10 scale Honcho was my first RC crawler. The soft spot I have for that makes me want this big dog!
Your Mom is a Pro! Serisiouly you should have her along more often. Love your content, please keep the upgrade videos coming for the SCX6.
Great Video 👌💯. Having an eye on the SCX6 for a while now and after watching this i want it even more 😂. Have a good one and keep on crawling 🤜🤛🤘. Also your mom did a great job driving it 👌💯
Way to go mom! Love the mini you lol.
A friend of mine has the Jeep version. Definitely a lot of fun to drive. He upgraded the steering servo to a 100kg servo (I can't remember the brand), but it has some serious steering power!
Hi Hayley, what an awesome looking rig!!! (been thinking of getting one for myself 😁). The plates are looking great on the truck, so glad that you like them! Nice work on the frames you made for them too. And your "mini me" is just the right size and fit as well. I've seen your "contour graphic" on a few of your rigs now and I gotta say, it really is a nice touch. Well done! Cheers, Dan 😉
I really want to see how many different vehicles you could possibly fit those body clips to! Awesome idea!
Your mom caught on quicker than me when I drove my first crawler. 👏
She said she was so afraid to scratch it she drove it like her life depended on it 🤣
the RC girl driver rocks ! and so do you .
Wow, that location looks awesome
yeah it was pretty perfect. Usually it's super windy out there but finally had a nice calm morning
I always wanted a honcho. The OG one. And then it ame out again, and now Super Size!! Love it. You a Blessed girl!! That thing is the shit😉😎✌🏻
Nice truck. ❤
I love rear pivot tilt bodies with a prop stand.
WOW! Your 3D printing is awesome 👍🏼
What do you mean.. kinda looks like you, I think it's spot on! Agree on the quick snap system - saw some for the Early Bronco after I bought it (on the sale, like I've seen a lot done) they are definitely handy!
Das Feature mit der Figur ist besonders gut gelungen.
I would say your mom a natural crawler awesome job!!!!!!!!!!!😊
Your getting really good at 3d printing now Great work
Great location your mom is a natural 👌
First thing i broke on mine was the panhard bar end at the shock tower. Exocaged has a good setup for it that has worked for me. i just uploaded a short of mine climbing the board of truth...lol
Hello wonderful video, keep the videos coming ! We need more people in the Hobby!
Do you have the link for the folding wing mirrors? Thats the one I was hoping to see after seeing your earlier short.
A guy I know who has one said a steering servo Vitavon billet wheels with Pro-Line Hyrax tyres and better anti gravity inserts and it is light and day different way better, have been buying bits and pieces for when I get one.
Yes still on my wish list, along with a few parts from VITAVON for all things billet alloy, yes the Honcho appeals more than the Jeep although I have just ordered th Rlaarlo RC 1/7th scale MK07 Jeep, I can also see a 3D printer in my stars as I get frustrated with looking for any parts I want, so the Honcho may get gazumped yet again.
I would have had one if it had not been back ordered hebce the Rlaarlo purchase which has good reviews on YT plus so much cheaper under £500 here in the UK. I do get frustrated by how many cool parts are 3D print only so only access to the printer required but a lot of us do not have access.
Love the tables another wish ilst item hmm.
I love my Scx6 jeep 😍
Great video!!! You aer a bad influence!!! I watched you video about the Creality 3d printer and that helped me make my final decision and now I want this GIANY CRAWLER!!! Ouch to my wallet!!! Great job keep it up!!!
Your mum is a natural
Dude!! More videos of this bog boy haha I want it sooo bad!! 😅😍
pretty please can you share the link to the side mirrors? (not in description)
Thank you for sharing a great video with a great car!!! ~~~^_^😊😊😊
nice videography. even more amazing is the landscape. where was this?
All those little customizations really make it… Especially the driver… LOL…
excited to see your long range FPV setup. will you be switching to ELRS with the Radiomaster MT12 radio?
I'm gonna use the radiolink rc8x with a TBS crossfire antenna and the caddx FPV avatar hd system. I just got a gimbal for the tiny avatar camera system so hopefully it will be a lot more stable video feed than when I first tried it.
Sweet just found your page today.
:09 I have been wanting you to get one of these for a long time! lol. glad you got it, looks like I have to order a another topo design from ya to put on mine. I have the tan body and want the red-orange one though. great vid
EDIT: I have the grey JLU Jeep SCX6 also.
Awesome rc girl I like it 👌👍😃😎♥️ Awesome enjoying watching too ❤
well break out the printer, and you have to step up to fpv with head tracking and put a cam in your mini me head lol. its fun stuff ,
Great video as always! I didn’t see 3d printed mirrors listed, are they still available? Thanks
540/3.7 is 146lbs
Considering the level of fitness on display I estimate height to be 5'10 to 6ft
Or shorter, and bad at math. 😂
Love your vid on the scx 6 honcho I’m saving up for one but starting to get upgrades, I really like the 3D printed accessories but difficult to buy also can’t see how to buy the wing mirrors any help much appreciated I’m uk based thankyou
Mom is a soldier!😊
this truck is epic!
Great vid! Thanks for sharing!!
that is sick. . . . . .
Great Video! Amazing Woman!
🎉😊
Do you have a clip less body mount set for the SCX10 lll Bronco? I have been looking for a bit now and haven't found one that I like. P.S. love the 3d printed You for your driver.
Can't remember were I bought mine, but they screw on the radiator and back bumper -he even included the longer screws that you need.
@@lylekehrer6159if you find it that would be awesome. Thanks for getting back to me.
It was Kevin Fine I ordered them from - I saw them right after I bought mine, but I'm sure a lot of people are printing them.
I love my SCX6 Honcho. I fit mine out with all Vitavon parts. It's bullet proof.
Das wird doch sicher ein teurer Spass, bei 8.000€?
@@cosmaninashiva6115 It was about 2500 US dollars plus the cost of the SCX 6.
Wish had more options diffs ext for price should fly looks nice wonder traxxas thinking 🤔 they could let rest come out then beat them for few years probably
Lady! 💯☝🏾⏰❤️ it can pull a full size car wen there is shims on the spools! I use mine to pull my pile of rocks/bolders on my big dog six wheel rc4wd trailer, the trailer has yoga brick for tire inserts and a old granddad clock springs cut heat bent to shape for leaf spring suspension 😂👌🏾… the solar flares are booming ☝🏾☀️⏰☝🏾☀️🎯⚖️🌌the great revel of secrets!
mom did good
Is it possible to get the driver? I´m from germany, grosse Klasse die Figur
Wow nice toy .... Im freaking so jealous u made some stuff with 3d printer made look much better .,.. it been ages for me i used go gas powered car and truck now this is way better then before .,...
Great place to run that truck 👍🏻
When is the long range fpv vid coming out? Is it DJI fpv?
Congrats on 100k and an awesome rig!🎉 Cherish that time with mom
If I had one of those, I'd name it "Mike".... "Mike Honcho".
NICE...
Very cool
They’re fun to watch, but upgrades and replacement parts are too expensive and it’s too heavy to carry out of the trail when it breaks.
3 words babe o Lucious
03:07 I also want an rc when I reach 100000....in another life maybe 😂
I couldn't even afford one. Lol
Looking hot….and the crawler looks good too
I always wondered, how do people without cars transport these? Is there even a bagpack in the world this fits inside ?
Sit in a wagon and tow yourself with it.
Can I buy one of those mini versions if you to drive my honcho?
I like it 👍🏻👍🏻
Waiting for that f1 content rc girl!
@@sol029 I knowww!!! It's coming next 😆
What is the runtime on a battery Hailey?
Good question, I didn't time it but one 5000mah 3s battery lasted about an hour of filming
That's a good runtime, impressive.
How can i get a 1/10 rc girl figure 4 my rigg?
For most $1100 is a big hit to drop at once,but most of us crawler peeps will
drop much more into a
1/10 crawler.
Where did you get the stand for the car?
It's the Traxxas xtruck stand. They make two sizes, so make sure it's the xtruck one amzn.to/3XI8ksQ
@@RCGirl Thank you!
Mini me 😅
RC Girl… I just wanted to let you know that you’re dope!!!
#DontAskWhyItsJustCuz
Aren't they just the absolute best!?!? It's definitely one of my top three favorites. I post shorts of mine. Check it out sometime and as always, another great video from you.
hi Hayley,I watch lots of your video about rc. Our company has some products fit you very much. How could I introduce them for you?
Where can I buy that RC car?
It is the Axial SCX-6 Honcho. Most Hobby shops can order you one. Or Horizon Hobby directly
Thanks