Iridescent resin crystal tower DIY | Making a resin crystal with LET'S RESIN silicone molds
HTML-код
- Опубликовано: 9 фев 2025
- Thanks for watching my iridescent resin crystal tower DIY video. Be sure to subscribe and go check out a few more of my other videos. Those are great ways to support my channel.
When working with resin always work in a well ventilated area. Wear a respirator with organic vapor filters and wear nitrile gloves.
#resin
#resinart
#resincrafts
Check out my previous resin crystal tower video, I used blue iridescent cellophane on those pieces and they turned out beautiful. Here's the link to my tutorial.
• Resin crystal tower DI...
Check out my milky way coaster tutorial if you are new to resin and want to see step by step how to mix your resin and pigments.
• 😍 Milky way resin coas...
Huge thanks to Let's Resin for sending me these crystal tower molds to try out. Here's the link to them on amazon.
discount code naptimemold will give you a discount
www.amazon.com...
Want to support /sponsor my channel? You can support my channel by sending me some resin or art supplies from my Amazon wish list. Here's the link. Thanks in advance for your support.
www.amazon.com...
The resin I used today is very similar to liquid diamonds resin from @TheEpoxyResinStore Liquid diamonds is a perfect resin for projects like this. It's a 2 to 1 ratio casting epoxy and has very few bubbles.
Discount code NAPTIME20 will save you 20%
www.theepoxyre...
******************************************
In today's video I also used iridescent mylar glitter. Laura's art corner sells one called iridescent sparkle white. You can purchase it from @Laura’s Art Corner Laura Usher
Discount code TISH10% will save you 10%
Coupon code can be entered at the bottom of the cart page on Laura's website.
store14266208....
Links to items I use in my videos purchased from amazon. If you have any amazon shopping to do at all. Please use my referral link to go to their website & shop just like you normally would. If you use my link to go to Amazon's site any purchase you make will earn me a small commission and in turn will help out my channel. You can also bookmark my link and use it for future Amazon shopping. I am so grateful for your support.
As an amazon associate I earn from qualifying purchases.
3M half face respirator I use. You must purchase 3M organic vapor filter cartridges separately.
amzn.to/3nYaZJR
3M organic vapor filters/cartridges I use on my respirator
amzn.to/3o0D0R3
Iridescent cellophane
amzn.to/3J1qcVC
Link to Nippers I use to clean up my resin pieces
amzn.to/3p4St5O
Heat gun I use for resin art, it comes with attachments.
amzn.to/36uh5tA
Let's resin crystal tower silicone molds
Https://amzn.to/3xSYkw0
Iridescent blue cellophane
amzn.to/3k3iej1
Let's resin chameleon mica powders set of 4
amzn.to/3jLprUR
Table top ring light I use for lighting
amzn.to/2NLYEJL
silicone paintbrush set
amzn.to/3qpv52r
Let me know if you have any questions down in the comments, I would love to hear from you.
Safety Disclaimer
Before you create ALWAYS read all of the instructions and safety labels on all of the products you are going to use. I am no expert I am just sharing the way I like to create art and any tips/tricks I have learned along the way. ALWAYS wear proper safety gear when working with resin and paint. I ALWAYS work in a well ventilated area. Also always wear nitrile gloves and a full face respirator when I work with resin. Remember to have fun and be safe when you are creating. Always keep a fire extinguisher nearby your Creation station. Thank you :)
Coupon codes good for any purchase.
The epoxy resin store- NAPTIME20
Ksresin- NAPTIME
Dryer days art studio- NAPTIME
Laura's art corner on Facebook- TISH10%
GenCrafts- NAPTIME10
As an affiliate of the epoxy resin store, dryer days art studio, Let's resin, ksresin, GenCrafts, LET'S RESIN and Amazon I earn a small commission at no additional cost to you. I greatly appreciate your support and use of my affiliate links and codes. All commissions earned help me purchase more art supplies so I can keep making videos for my RUclips channel.
I appreciate your video not being long and drawn out. Right to the point!! Thank you!!
Thank you so much and thanks for watching. I like to watch quick straight to the point videos so I like to keep mine like that too 😁🤗
I just love it. It's beautiful. Have a wonderful day
Thank you so very much 🤗 you too 🤗
Very, very lovely, Tish!
Thanks Pam 🥰🥰🥰
Beautiful!!!❤❤❤❤❤❤❤❤
Thank you so very much and thanks for watching 😊
love learning something so simple that becomes so incredibly beautiful! (and don't forget your vitamin D if short on sunshine)✌
Thank you so much, these are so easy and fun to make. I love the way they look all finished 🤗
We have been taking the vitamin D, I have some drops I add to my water. I have drops for my kiddos too 🤗 thanks for watching 💜
Really beautiful Tish 😍
Thanks Mandy 🤗🤗🤗🤗🤗
Your crystal towers are always stunning 😍 love how they turned out .
Thanks so very much my friend 🤗🤗🤗💟💟💟💟💟
So pretty!! Love it!!!
Thank you so much 🤗🤗🤗💟💟
So beautiful, I love it
Thanks girl 🤗🤗🤗💟💟💟💟
So lovely!
Thank you so much and thanks for watching 🤗🤗🤗
Gorgeous !!
Thank you 🤗🤗🤗💙💙
I love it a lot ! Wow ! This cellophane paper is gorgeous for this kind of project ! 👏👏👏💙💙💙
Thank you so much my friend 🤗 it works awesome for these. Thanks for watching 🥰🥰🥰🎄🎄
Really pretty.
Thank you 🤗🤗🤗
Thank you for showing us how this is done! It's SO beautiful!!
Thank you so much and thanks for watching, I love making these and can't wait to make some more like this soon. 🤗
Ohhhhh love love ❤️
Thank you ❤️🌹🤗
Beautiful 😍
Thank you 🤗🤗🤗🎇🎇
That’s a cool looking tower and love the tip to use the alcohol to remove it from the mold. Educational and fun to watch as always
Thank you 🤗 I love making these they're so fun and easy too. Thanks for watching 😁😁😁
Beautiful! Elegant! Saving this video and will be spraying my alcohol in the mold tomorrow!
Wow that is gorgeous!!!!! I love the way it turned out. ❤
Thank you so much and thanks for watching 🤗🤗🤗
Beautiful 🥰🥰
Thank you 🥰🥰🥰🥰🥰🥰🥰
So pretty & love the rainbow prism effects it will give off as well as the opalescent iridescent look! Thank you for sharing & teaching Tish, your videos are lovely!!! 💞🙏🙂
Thanks a million Pam 🥰🤗 I love making these. They're so fun, the hardest part is waiting to do the next layer 😅 I want to make some half blue half white opalescent next.
Thanks for watching 🥰🤗💙
It’s absolutely gorgeous!!!
Thank you so much and thanks for watching 🤗🤗🤗
Absolutely gorgeous!!!! Thank you for the wonderful tips (MUCH cheaper to buy a large roll of iridescent cellophane and diy than buying the super tiny jars!!)!! And, again, your voice is sooo soothing!!
Awe thank you 🤗🤗🤗 & thanks for watching 🤗
I agree the roll is much more cost effective. Only $13 for a huge roll. You could even put some in a coffee grinder to make super small pieces more easily 🤗
You could also put it on - of those round mini light box things to display it so you can display it anywhere, regardless of the sun.
That's a cool idea, I'll have to check it out and give it a try. Thanks for the idea 💡 🤗🌸
It's beautiful, I love it.
Thank you so much Pam, I love making these. Thanks for watching 🤗💟
Thank you, Trish! I have some similar molds, but had no idea how to get started. I love yours!
Awesome, I'm so glad this was helpful. Definitely give this a try. The pieces are gorgeous in person 🤗 thanks for watching 🥰🥰🥰
Absolutely beautiful! I’m new to resin art and this has given me some lovely inspiration x
Awe thank you, that makes me so happy to hear. Thanks for watching 🤗🤗🤗
Hi. Subtitles 🙏🏻 Thanks! I loved your art! ⚘
Thank you so much and thanks for watching 🤗🤗🤗
I have heard some people do their next pours before the resin is fully cured while the layer below is like 1/3rd cured in order to avoid that tiiiny line of demarcation between the layers when they do clear projects like this or those pyramid molds. Have you ever tried this method? I haven’t done any big projects yet that require multiple pours so I want to learn as much as I can before I do! Love these crystal towers, this one turned out so beautiful! 😍 I like the blue ones you did in a previous video as well!
Thank you so much and thanks for watching 🤗💙
I have heard that too but haven't had a chance to try it yet. I hope to test it out soon. I haven't been able to time it just right where I can pour 8 hours after the previous layer has been poured. I usually pour in the afternoon and by the time 8 hours hits I'm asleep or too tired 😅 but it's on my list to try asap 🤗
@@naptimecreations yay! Please film it when you do so we can learn too 🥰 Love your videos!
@@TheHannahBandana Thank you 🥰 I most definitely will film it 🤗 I'm going to test it with liquid diamonds because I know with that one, about 8 hours is the time to pour the next layer to avoid that line 🤗💟
I do this all the time and it works perfectly. Just be sure to mix your new layer thoroughly before you pour. :)
@@lordmater awesome, thank you 😁🤗
awesome
Thank you 🥰🥰🥰🥰🥰
I love these, your blue one is so pretty too! I have the same molds and I’m going to do this with a deep pour resin that I haven’t tried yet. Can’t wait to see the results! Thanks for the idea! I hadn’t thought of trying this and I love iridescent film.
Awesome, I hope you give it a try. They're so pretty and easy to make too. I love how they turn out.
Let me know how yours turn out. Definitely give it a try asap 🤗💙 thanks for watching 🤗
@@naptimecreations I will let you know for sure! I’m going to try doing it in a single pour, I want to test the limits of this new resin. A wood turner a watch uses it and I’ve seen him pour it at least that deep. I am going to refrigerate it though, to slow the cure and hope it doesn’t go exothermic on me 😆 Refrigeration worked the last time I tried it and it wasn’t a deep pour resin. I have an extra little fridge that I’m not using for food. I’ll let you know if it works. Thanks for all your help!
@@funo6581 ooohh that sounds really cool, I'm excited to hear how it turns out. 🤗🤗🤗
Graciasssss
Thanks for watching 🤗🤗🤗💙💙
Gorgeous crystal tower! How would you go about top-coating the tower?
Thank you 🙂 to top coat use thicker resin.
Do you use a release spray? This is so pretty. Great idea.
Thanks so much for watching, no I don't use release spray. Just some 91% isopropyl alcohol before I demold and it pops right out 🤗
So beautiful and mystical. Love the clarity. I just got my Liquid Diamonds resin and am anxious to use it. There were no directions but I'm sure I can figure it out. Thanks for your videos. What part of the USA do you live in? Just wondering. 🦋
Thank you so much and thanks for watching 🥰 I love using liquid diamonds it's awesome. Sorry it didn't come with instructions. In this video I made last year I show how I mix and measure it out. It's a 2 to 1 ratio.
ruclips.net/video/TEnqrpzjUtM/видео.html
I'm in the P.N.W what about you?
@@naptimecreations Thanks for your reply. I'll definitely check you link out. I live in NE Tennessee just south of the Bristol Motor Speedway. Nascar country. I used to be a fan but things have changed. Thanks again Tish.
@@littlefeather9709 Tennessee is a beautiful place I've always wanted to visit there. Maybe I can one day 🤗 my aunt used to be a huge Nascar Fan too but not anymore. She says it's changed a lot too and she doesn't like it anymore. I always remember watching the races on TV with her 🤗
Do you only add resin or resin with hardener
You have to mix the resin and hardener together or it won't set up. In these videos I show how I mix resin ruclips.net/p/PLQCwNqjO4lV38G_T9i9lC2yxIyvS_fES4
Is your cellophane fusible?
Did you use Iridescent Cellophane Wrapping Paper?
Thanks for watching, yes I did. I cut a sheet crinkled it up and then cut it into small pieces.
Why three layers? Why not pour all at once? I could understand if you were making the tower with three colors (which would look amazing, by the way), but for all one color... I just don't understand. If the concern would be over the iridescent pieces sinking, it could be avoided by just waiting a little longer for the resin to slightly thicken before pouring.
Thanks for watching, In my previous resin tower video. I did pour it all in one layer and it didn't set up properly because it was poured too deep in a single pour. The casting epoxy I use shouldn't be poured over 2 inches per application.
This is the video where I poured it in 1 layer
ruclips.net/video/I_6YVO5jcPo/видео.html
It was sticky in some spots. In my previous video I poured one of these in 1 layer and another in 3 layers. The one with 3 layers set up perfectly the other one done in 1 pour had sticky spots. So I did 3 layers on this piece to avoid the sticky spots.
If you have an epoxy that can be poured that deep then definitely give it a try. I have yet to try one that can be poured 5 + inches deep in a pour.
@@naptimecreations Oh, OK. Got it - that makes sense. 👍
@@AGDinCA 😁🤘
wow you can make a orgenite
out of it
Thank you 🥰 I can definitely give it a try. I will try to make one asap 🤗