Unsatisfactory EICR Remedial Works | Electricians Life
HTML-код
- Опубликовано: 20 авг 2024
- This weeks video we are rectifying some EICR unsatisfactory issues on a rental property.
If you like the video, please consider subscribing to the channel for more weekly electrical work. 😊
Great job on that consumer unit!
Thanks for watching Steve and for you continued support on the channel 👏🏼
Good job. Good video. The DNO should swap that incoming fuse carrier to a GRP unit. Customer should be able to get that done for free due to its age. If there really lucky DNO might add an isolator. Keep up the great RUclips videos.
Thank you mate 🙌🏻
Being an apprentice I watch ur videos regularly and I'm learning a lot, thanks for taking time and uploading great videos.
Thank you very much for that! Makes it all the more worthwhile hearing it! ❤️
Good job!
My young helper decided to see what a certain valve was for,🤔 just then super hot beef fat poured onto the back of my hand, cooked a few layers of skin I now have skin from my leg/arse on me hand. another great video lads it's a great distraction I going to roll a blunt and watch part 2 of the rewire, tell paddy he did a great job on the fuse board
That sounds nasty but I bet the smell was nice 😂 thanks for watching as always dude 👏🏼
Another good entertaining and informative video Sean and what a cracking job Ryan has done of that box,you certainly have taught him well,looking forward to the next one
Cheers bud 👏🏼
Thanks for another video. Well done to Ryan!
Thank you
Good job Sean bro.
Thank you brother 👊🏼 appreciate you
haha.... hate it when spare ways are labelled SPARE in huge letters, or even small letters ......but hey nice tidy work and very informative videos of real world electrical works.
I’m on the verge of don’t like it labelled spare but I also don’t like assuming ones spare when quoting then you open it to find out the bus bar has been cut down and it’s not useable too 🤣 I can’t make my mind up! Thanks for watching mate 👏🏼
Ryan.nice board change👌👊another quality job gents
Thanks Martin 👏🏼
Nice one Sean 👌👌 Ryan smashing board tidy af 😎😎 when I get you lads over to mine I think will let Ryan to do the board change (Verso of course😉) and will let you do the apprentice stuff 😜😜 keep em coming mate 🙌🏻🙌🏻👍👍
Haha sounds good to me 👌🏼😂thanks matey
Let's get this show on the road
Hold tight 😆😆😆
Top quality as always Sean. I can remember them old bath and sink switches. Bath done the immersion at the bottom of the tank and sink done the one near the top. I take it the lighting circuit is wired in twin aluminium cable 1/.044 equivalent size to 1.0mm 😆😆😆
i couldn’t believe they still make them bath sink switches! Click scolmore make EVERYTHING
Mk is still making them and I think electrium under the voles name make them. I've noticed this last couple of years scolmore is starting to really come to the front of electrical accessories after having being about for a number of years but being unknown. I noticed they make boards which I didn't know about.
*volex*
@@adierob1 the reason I use them is because I know I am guaranteed any accessories in and shape etc to match anything I’m installing.
And yea they do have a consumer unit but it’s just the Gpro kit one off Amazon rebranded. Not a fan
We use Hager and square d Schneider boards but the way the industry is now they are all nearly made in the same factory with a different name put on them. Not a fan of contactum stuff but like you say scolmore click has a good range and I like the way you can swop the backs out for different configurations. I like your fuse idea on the fan isolator that's neat and the way to go to comply with the fan manufacturers instructions
A top install as always gents 👌🏻
Merci beaucoup! 😊
As always 👏 greatest..
Appreciate you watching them 👏🏼
Great job Ryan, how much work did your apprentice do? 😆😆😆
'ey up Sean 😎
Jeez - it's like a house from Homes under the Hammer.
DNO Tony 😂
@@efixx he’s camera shy the poor lad
I would of thought "Tony" from the DNO would of fit an isolator in the tails save having the fuse to be removed in the future if any work is required on the electrical side.
He’s a little bit tight when working for some customers because they don’t like spending money on things 😂
Tony figment of imagination why dont you sparks admit you pull the fuse !!!
@@eddiereed5025 I’m a law abiding citizen
@@Cablesmith got to be safe working near electricity, as long as the fuse is removed by a qualified electrician and not a DIY person.
Great video pal! Good to see Ryan progressing with an awesome CU change! How do you code things? Do you use the napit codebreaker book or the usual, use your best judgement ie the cable in the cupboard you changed to C2? Thanks mate
I did have the book but I lost it somewhere. But most of the time I’d just use my own judgment unless it’s something bizarre I wouldn’t know what to code it. But yea the cable for eg, I’d imagine the book will say c3 for an unsupported cable but the book can’t see how easily it can be pulled out the back of that socket for eg, so in that sense it’s not gospel imo.
@@Cablesmith cheers mate thank you for replying! Great picking your mind and I appreciate the time out of your day. I struggle with some coding doing mocks at moment as some can easily be another code but always learning :)
@@louissmith5203 no problem mate.
Nice work. Should the water bond be on the other side of the stop tap, consumer side?
Thank you mate. Yes it was on the consumer side, you couldn’t see the tap on the video it was half way between the bottom of the unit and half under the unit.
Metal screws on the plastic switches though?
plastic back boxes and plastic lugs in them too. Strangely enough I’ve just came back from this exact house with my NICEIC assessor today.
@@Cablesmithwhat are the chances!
Keep up the good work man
@@liammoore5192 so strange. Nobody has commented on this for ages, I forgot I even filmed this job 😂
Hi mate hope your well... do you cover alot of areas or just the Manchester area? ... im in need of completing my nvq and im wondering if I was to offer free labour hours would it be of interest to help me complete my nvq portfolio? Thanks mate keep up the good work
Hi Liam, yes I pretty much only cover Manchester unless it’s something specific really. But good luck on your search!
Thanks
Thank you for the reply mare I'm nottingham based been a long and costly journey lol.. im almost there just the final stretch to go its not easy to just study anymore you have to get a competent person to sign of your portfolio which is good to some degree but you have domestic electricians less qualified as such that can fast track and sign off work that your unable too even after how long studying ect no disrespect yo any type of electrician out there ect I just don't get the common sense they've used to hitch the criteria together... but then having no resources from companies to help you ... it costs alot of money but you hit a brick wall ... thanks for the good luck wishes and continue with your vids I wish you great success although I'm sure you don't need it. All the best
@@liamwoodward1552 there has always been stupid criteria but seems like it’s getting worse! my best advice would be to get a CSCS card and get on site as a subcontractor/electricians mate.
I have cscs card already but I think that may be the best thing try get on a electricians mate short term just to fulfill this nvq malarkey abit of a nightmare but thanks for the help I really appriciate this more then you could realise.
@@liamwoodward1552 that’s basically what I had to do also, so I know it works out 👌🏼
I cringed at that boiler wiring 🫣 nice install Ryan well done ~ great to see folk taking pride in their work 👍🏻
Haha thanks Ian 👏🏼