@mucherum What do you mean by the "unlock works fine"? if you can get the welcome screen then you dont have to go to "sim applications". The point of that was to get the 'Welcome screen' to appear. Once it appears then you can continue following the video above.
@henrilame10 You don't have to jailbreak your iPhone but yes if you have a micro-sim card you just have to shave off a little piece from the top right corner of the sim to fit it into the GeVey tray. If needed it is demonstrated in this video. Yes, the GeVey sim does work in Europe on Vodaphone sim cards =] hope this helps
@Stheens Make sure your sim card is aligned properly in the Gevey sim; sometimes it may be off by a bit and my not register the sim card. If its properly inserted then the Sim applications will appear in the settings-->phone--> sim applications menu. If you're lucky the welcome screen might appear without doing anything after you insert the sim card. If so then just follow the rest of the steps mentioned in the description or the video.
@V4N1K22 If you updated to firmware 5.0 with a baseband of 4.11 then the Gevey sim wont work. Before upgrading to 5.0 you had to have preserved your baseband. What firmware are your running?
hi i have gevey supreme and i accept it turn air mode on n off wait for signal bar to show but it doesnt show i wait and wait but nothing happens any ideas ?
This will not work on the iPhone 4S. I will be testing a new GevY sim specifically designed for the 4S and will make a video hopefully soon. I will let you know so keep in tune hopefully before your 2 months is up. =]
on mine also came the welcome message i accepted but i didnt get no signal bar so i can continue doing it ...... with my firmware 5.0 baseband 4.11 ... weird
@Throne030 In this video the iphone version is 4.3.3. It does work on this firmware. But honestly I found out that even this presumebly "untethered" unlock sometimes requires you to redo it sometimes. Let me know exactly which part you are having problems in.
I agree with you, its never 100% accurate; sometimes if you turn off the phone it and turn it back on it randomly doesn't pick up the previous unlock. There are other sim cards however from "applenberry" that are much better than this one. If you like check those out. Hope this helps =]
@Viper11220 aaahhhh dammm cuz it was alreadyy on firmware 5.0 baseband 4.11 i didnt know that it wont work on that firmware the day i commented on your vid but like few days later i thought to myself that it wont work for that firmware i have but thanks for letting me know 100% :D looks like igot a gevey card for no reason :P i also thought it might of been a fake sim card it came only with card and metal case i thought there might me a manual inside too but there wasnt .. ahwell thanks bro :D
@mucherum What do you mean by the "unlock works fine"? if you can get the welcome screen then you dont have to go to "sim applications". The point of that was to get the 'Welcome screen' to appear. Once it appears then you can continue following the video above.
@henrilame10 You don't have to jailbreak your iPhone but yes if you have a micro-sim card you just have to shave off a little piece from the top right corner of the sim to fit it into the GeVey tray. If needed it is demonstrated in this video. Yes, the GeVey sim does work in Europe on Vodaphone sim cards =] hope this helps
Awesome job Paula =]
@Stheens Make sure your sim card is aligned properly in the Gevey sim; sometimes it may be off by a bit and my not register the sim card. If its properly inserted then the Sim applications will appear in the settings-->phone--> sim applications menu. If you're lucky the welcome screen might appear without doing anything after you insert the sim card. If so then just follow the rest of the steps mentioned in the description or the video.
@V4N1K22 If you updated to firmware 5.0 with a baseband of 4.11 then the Gevey sim wont work. Before upgrading to 5.0 you had to have preserved your baseband. What firmware are your running?
Hey I have gevey sim supreme. When I was on 4.1 it was untethered but since I updated it too 4.3.3. It isn't untethered anymore. Any suggestions ?
hi i have gevey supreme and i accept it turn air mode on n off wait for signal bar to show but it doesnt show i wait and wait but nothing happens any ideas ?
This will not work on the iPhone 4S. I will be testing a new GevY sim specifically designed for the 4S and will make a video hopefully soon. I will let you know so keep in tune hopefully before your 2 months is up. =]
@TrickShotzTuTorials I bought it on eBay!
on mine also came the welcome message i accepted but i didnt get no signal bar so i can continue doing it ...... with my firmware 5.0 baseband 4.11 ... weird
My phone doesn't have "Sim Application"!
What can I do?
You alive?
Alive and kickin! 👍🏼
@Viper11220 The problem I now have is that I don't get the accept screen whatsoever. I tried everything but still :(
Whem i turn off i have to repeat the steps :(
@Throne030 In this video the iphone version is 4.3.3. It does work on this firmware. But honestly I found out that even this presumebly "untethered" unlock sometimes requires you to redo it sometimes. Let me know exactly which part you are having problems in.
I agree with you, its never 100% accurate; sometimes if you turn off the phone it and turn it back on it randomly doesn't pick up the previous unlock. There are other sim cards however from "applenberry" that are much better than this one. If you like check those out. Hope this helps =]
@eldin3d No problem, anytime =]
@Viper11220 aaahhhh dammm cuz it was alreadyy on firmware 5.0 baseband 4.11 i didnt know that it wont work on that firmware the day i commented on your vid but like few days later i thought to myself that it wont work for that firmware i have but thanks for letting me know 100% :D looks like igot a gevey card for no reason :P i also thought it might of been a fake sim card it came only with card and metal case i thought there might me a manual inside too but there wasnt .. ahwell thanks bro :D
@V4N1K22 sorry bro, but dont lose hope; if there is anything new or if i find a way around this I will let you know. Good luck =]
@Viper11220 ohh okii thanks bro ;)