Teardown: Harbor Freight Hercules angle grinder review
HTML-код
- Опубликовано: 29 июн 2017
- Here's a comparison between the Hercules and a DeWalt grinder: • Teardown part 1: Harbo...
This is the 62556 grinder from Harbor Freight’s new Hercules line of tools. Hercules tools are more expensive than the other Harbor Freight brands. I tore this one apart to see how it stacks up, and I was surprised by what I found.
In this video, I compare the $40 Hercules grinder, a $24 paddle-switch Chicago Electric grinder and the cheap $10 Drillmaster grinder. 
Хобби
![Jelly Roll - Dead End Road (From Twisters: The Album) [Official Music Video]](http://i.ytimg.com/vi/_Mb8CqKW4R8/mqdefault.jpg)
I am an employee at harbor freight tools. My store loves watching these videos. Im personally a welding student and have used all four of the angle grinders we sell and the hercules one is my favorite. We just released more Hercules and Bauer drill drivers, hammer drills, impact drivers, and more electric Earthquake impact guns and electric ratchet. They advertise the hercules drills against a specific Dewalt drill, I think a side by side comparison of these drills would make for an awesome video if not the rest of the new stuff as well
I'm also a harbor freight employee and welding student 🤠
Hi there, could you help me? I'm looking for those carbon brushes for the Hercules grinder, I need to know the espesifications of those.
@@adanmora1390i got you
@@adanmora1390nvm i don't got you. I couldn't find a parts list.
AWESOME REVIEW!!! I'm a heavy equipment mechanic and I'm SO tired of cheesy uneducated tool reviews where these guys pretend they have a clue! You covered all the important stuff and beyond and you're very educated and went into extreme detail on bearing and switch manufacturers. My friend I'm EXTREMELY IMPRESSED!
So 5 years ago you tore apart the same model Hercules grinder I have, to see how well it’s made. ( I agree btw, love Hercules tools). But, I was looking for a video for someone doing a cord replacement. I’m not going to admit how I came to grind through my cord but… think, NC, working in hellishly unusual cold weather… that’s my excuse, sticking with it. The second stupid thing I did was not take a picture of the switch assembly before I took it out to disconnect wires. Your shots of the switch removal saved my bacon. Many thanks. 5 years later.
finally another person to teardown tools and review them, thank you so much, also pls do some reviews on Ryobi and Kobalt power tools plus they are more budget brands
Thanks. Those are good suggestions.
Went to Harbor Freight today and bought one of these Hercules 4-1/2 inch grinders. Your teardown and review pushed me over the edge. Thanks for a good, honest report. I'm a subscriber now.
After 2 years of minimal use my old HF Chicago Electric grinder died. I was debating the Herculise or Dewalt but after your video I purchased the Herculise. I am very happy with my choice. Thanks for all the great info on how HF stepped up their quality. Keep the videos coming.
I love the AvE style while still keeping the videos unique to yourself, keep it up man!
And not talking with a childish language…much appreciated and I can actually listen in to your entire videos unlike AvE.
I just shared your review on my Facebook page. You did a great job, like the way you stay on subject, your videos are clear, looks like you planned your shots out well, your audio is clean, and you know what you're talking about. Happy to be a subscriber.
Awesome video dude,please do more .You articulated that tear down and comparison perfectly....stellar !
welder here, I purchased one and use it everyday, actually a better word would be abuse, left it in the rain, 14 foot drop onto concrete, and use it for everything, every attachment that you can put on a grinder I have used. I am well beyond the 1 year warranty that I got for it too, I own the 11 amp model, I like paddle triggers allot more. I actually in fact love this grinder. if you are looking for a grinder, it would be a mistake to get anything other than the hercules
Nice review... Not too shabby for a $40 grinder
Just came across your teardowns since I’m about to buy a couple of new grinders. Subscribed...thanks for the straightforward look without all the hype.
Thanks for the kind words.
Great review. Well done.
Subscribed. Great video. Nice and informative, not too long and very professional. Hats off to you sir!
Hey man, nice channel! I'm an AvE fan, but I appreciate your no-nonsense approach with 100% less jokes about putting things in vises. I've been holding off on buying a grinder as I don't have a serious need for one in most of my work, but I might just pick one of these up for some light duty work with one of their infamous coupons.
Thanks for the exceptional review!
Thanks for the teardown and overview. I have the blue, paddle switched one. If it ever fails, I'll pick up the Hercules version. The last time I was there, I noticed several buyers of the new branded products.
Great video thanks for putting so much detail into it.
damn. I knew it was an upgrade but WOW this is a big jump for HF!
wow, so detailed information thanks a lot. I have purchased a Hercules one tried once. no problems. good to know more from you. 👍👍
You are doing a fantastic job to serve the public interest. I subscribed and will follow you channel from now on
Thanks for the video! If it still works, along with the other two, try a comparison between vibration and power. One major improvement with more expensive tools is almost always less vibration and it might be interesting to see how much, if any, there is a difference between them.
They do all still work. It's a good suggestion.
I just bought the Hercules today. I have been using the drill master ones for a while and throwing them away basically. The Hercules runs a lot smoother with a lot less vibration and cuts smoother without skipping, bogging or jumping.
THANK YOU MUCH . BOUGHT 1 HERCULES HE61S TODAY . OPENED AND GREASED IT . TESTED , IN THE BOX CAME WITH METAL WHEEL AND EXTRA BRUSH SET .
I really like AVE's videos and could watch tool breakdown videos all day. Cool video. Thanks. Subscribed.
Thanks for your video !!!...I just bought the Hercules and I have made a video of it cutting through a 3/8 inch thick piece of steel using the grinding disc & a cutting disc
Been using the Hercules since it came out. This is June 2022 and prices are a lot higher now but it seems to be holding up just fine doing a lot of cutting and wire brushing with a heavy twisted cup brush to remove weld slag.
Well, I know where I'm getting my next angle grinder?
Thanks for the video!
This is great. I would love to see you and Project Farm pair up for collaborations
Thanks for the video!!!!!! Awesome tear down!!!!!
Well put. HF is really stepping up their game.
I have that grinder and I put gear oil in the gear case to help with heat. I put a oring under the spring for the push button lock and it hasn't leaked yet! It runs quite a bit smother
Yet another clean, smooth, tool teardowns. Mr. A + from here. Keep up the good work
Thanks for the kind words. I'm thinking about a few new videos for the future, but I'm always open to suggestions.
Suggestions...How about Fixed base routers? or Electric Impact Wrench? or Reciprocating Saw all at a low cost @ HB.
Very Good Video, I almost bought one the other day, now I might go back and buy it.
Thanks! Just got a coupon for one of these and wanted some details before I head down there.
I'm impressed with the quality of your content, the grinder looks great too. I haven't tried the new Hercules grinder yet but I like the ease of use of the midrange harbor freight grinder more than a dewalt grinder. I suspect it's mostly because of slightly less torque on startup yet still plenty of power once spun up. I subscribed and am looking forward to more videos.
this looks extremely familiar to the guts of my hitatchi i bought for $36 about 10 years ago. it's still running strong so i can't say anything negative. HF stepping up!
I've burned up a number of grinders and the failure is either a shorted field winding due to excess heat or a broken rotor to commutator wire. Looks like they've addressed those issues in the Herc. It's a pretty nice tool in my opinion but I'm sticking with the "yellow or green" ones for now. I really like this review, very well done.
Great Video and a very good review! Thank You!!!!
Thanks for covering the details! I agree this represents a major step forward for HFT. I've heard there's a new welder upgrade coming under the Vulcan brand. I've seen the signs in the stores, but then they pulled them. Heard anything?
Thank you so much for the clear review! I was just looking at it in the store yesterday. From your video, the ring hear is friction fit to the shaft and I don't like that. Basically I just dislike anything that's friction fit as that's always harder to remove for maintenance :-)
Also, you should include some running test to compare the noise levels and power.
absolutely a great video. thank you for what you do.
looking foreward to the dewalt vid
Thanks for watching. I'm hoping to pickup the DeWalt it in the next few weeks.
I purchased this grinder on this videos advice. I like it better than my Milwaukee and Bosch, on par with my Makita. I like that it's side handle mounts at 90 degrees and the guard is quick to adjust without tools.
Great video. Love to see your teardowns.
looks worth the money!!
I've had this grinder for about 18 months. Use it almost every day. For $35 with a coupon, IMO, it's a true bargain. Doesn't skip a beat. Didn't think the optional warranty was worth it. If or when it breaks, I'll buy another. A terrific tool for the money.
I also have a similar Hitachi grinder. The Hercules is more powerful and runs smoother. Have a newer Craftsman grinder, as well. Closer, performance wise, to the Hitachi. Really, for $35 the Herc is fantastic.
Yup. No extended warranty here. Just take them back and say you want to upgrade to the next model. For HF members, just pay the difference for new tool.
Very nice explanation,
I own this grinder. This thing is awesome. I don't use it daily. I have used it on many tough job's. Doesn't lose power and can handle just about anything ( within reason )
AWESOME tool reviews!!! Honestly the best review on tools I've ever seen!!! And I'm a heavy equipment mechanic so it takes a lot to impress me with tool reviews! These other guys are quite honestly just a bunch of glorified carpenters that really have no clue
thanks for the teardown. I'm curious to see how it compares to the dewalt.
I love your channel because everything you are doing is awesome because I am thinking of buying keep UP the reviews
Thanks for the kind words.
I really appreciate your reviews. For instance I always thought the grind markings on the steel portion on the rotor were defects or wear but I learned on the other video that they are to balance the motor. Also I didn't know about the glass reinforced plastic. You are even able to interpret codes for the cables, plastic parts, and bearings!
Since you talked about revenue for the channel, do you know if you still get ad revenue from someone that has both a youtube premium subscription AND an adblocker on their browser?
I'm wondering if I need to disable my adblocker.
I would like to see a comparison of the various brands of cutoff wheels and grinding discs.
and nice vid. i cant wait to see what you tear down ini the future
nice job man, I'd like to see you do the new Hercules drill/driver and the Hercules impact driver.
They are supposed to be DeWalt killers... let us know if they are worth it or not.
I bought this grinder and I really like it.
nice video. I'm surprised to see alot of Hitachi grinder parts there. I do wonder if you can stop it under load like one can of the other two cheaper grinders.
Awesome content!!!
Thanks
nice review will have to buy and give a chance
keep up the good work dude
Great video thank you
I've worked in the automotive tool business for many, many years. There is good reason why cheap tools are cheap.. One of the companies I worked for was an importer/ manufacturer of pneumatic (air) tools. The point of manufacture was was Taiwan, in the same plant as Ingersoll Rand. Many of our air tools were exactly the same inside as the IR tool. Many were not. The changes we could make to a tool were amazing. Cheaper bearings, maybe even a bushing instead, press fit items instead of bolt together items, no seal or cheap seal. You get the picture. The problem is that many big name companies have made changes like this and still ask the big bucks. They also make a less expensive line, but it looks just like the premium line !! If you want a good tool, ask around and look at what the pro's use. Get the MODEL number of what they use.You won't go wrong.
I'd really like to see a teardown of the hercules drill or impact
I love these videos! Can you do one of the ~$15 3/8" air ratchets?
Thanks for the suggestion. I haven't done any air tools in a while, so maybe I should check out a few more.
Interesting, seems like a reasonably good value (I don't care much for warranties, usually more trouble than they are worth unless something is DOA). Bummer you can't use the 20% off coupons on them though. I look forward to seeing the Dewalt comparison.
You got to do a tear down of earthquake cordless 12V 3/8 ratchet. It's look just like cordless ratchet from AC Delco.
Uncle Bumblefuck would love one of them
flyingjeep911 Nah, he'll just accuse Tool Teardowns of being a shill, like he did "that other guy".
David VanDyke if AvE has cause to call someone out, I'm sure there is reason.
I have a porter Cable angle grinder which is awesome.
Please do a Walmart $20 “Hyper Tough” grinder. Super cheap, but curious how it compares to the others you’ve done.
For the same price I can buy 4 of the cheapest angle grinder and have a different wheel on each one. One for metal, one for masonry, one for grinding and a brush from cleaning/polishing. That way I don't ever have to change the attachments.
Not as FUNNY as AVE, but I gotta say I like this review style better!! Earned my sub!! Also make sure you tear down the new Hercules 20v tools before AVE does!!
The advantage of the spring on the Hercules isn't more consistent spring pressure. It allows for longer brushes as the pocket doesn't need to include room for the coil spring.
Actually, the coil spring probably offers both benefits.
Tool Teardowns right the brush has to have constant contact as it wears down great job dude
Great video thank you for sharing had to subscribe it is awesome God bless...
p.s. I ended up purchasing a Hercules Grinder. I had purchased the cheaper Drillmaster but after watching the video I realized the huge difference between models and took it back for the Hercules. Although I won't use it a lot, I don't want to have to keep purchasing the same item.
THANKS
I'd like to know which factory is making these new Hercules line of tools. Comparing things like brands of bearing, switch, cord, etc, should provide clues. Guess we just have to take apart every grinder to find out, haha.
nice job.
Was in the HF store and bout the Hercules on a whim. Gotta say I like it a lot more than my DeWalt paddle grinders. The DeWalt's get very hot after just a few minutes grinding. I mean uncomfortably hot.
I will likely replace the DeWalt with other Hercules.
Nice vid
John Gibson I've had the mid priced one for awhile.. smoked two now have the Hercules... Needed a grinder for school I wouldn't cry if it broke or got stolen. Anyways 2 days in with hercules and it's held up has alot more power than the mid priced
please do their 20v hercules impact driver or even their Bauer 20v impact
Do you think you'll be able to take apart the new harbor freight cordless drills?
I bought the cheap $10.00 drill master grinder and it burnt out after 35 seconds... yes 35 seconds. I am grinding down a cement slab ... have a crack which is slightly raised and using correct grinding wheel (diamond). Do you recommend the Hercules over the 30.00 drill master? Ps GREAT VIDEO! First time I saw one of your videos.
what guage are the field windings though? thats usually the failure mode on these under powered grinders
My 4 1/2” Milwaukee grinder has a bushing at the head instead of a bearing. It kinda irks me that it’s made that way. But whatever. That Hercules looks really good.
excellent work good job, I'm subscriber and good luck
Your thoughts on Bauer 7amp vs Hercules 7 amp? I dont like the Bauer 8 amp trigger switch ( I think that's an accident waiting to happen) 🙂
I've been posting videos on RUclips for over 10 years, but I do like their new feature of matching me up with hammer and chisel guy stuff. I use Grinders everyday, and my landlord just gave me an expensive seasonal Kobalt grinder three guys, 20 minutes, we could only get it to work for a couple of seconds. too fancy, too many buttons, Whadapieceifjunk. So he threw away the box, and lost the bill. So I went to Harbor Freight and I bought him the $25 grinder, for the little bit he uses it, we'll see how it works. I was at Lowe's a couple years ago and they were liquidating the $25 grinders for $5, I bought the shopping cart full of them and guess I'm set for life. One thing I've noticed about these grinders is sometimes the switch is so annoying to use, and I like to put 5 inch thin cutting discs in, and some of them rub the guard, some of them except the 5-inch disc which is more convenient for my cutting purposes then a 4 1/2" disc. Harbor Freight doesn't sell a 5in disc at all. and thank you very much for your videos, I'll be a subscriber
Thanks, so I'm off to buy 4 of the $10 grinders for the price of one of the Hercules
can you compare the 20v Hercules hammer drill to the 20v dewalt hammer drill?
I hope you plan to review the Hercules drill. You know the one that HF compares to the Dewalt DCD780C2. I bet we'd all like to see that comparison...
That's a good suggestion. I'll keep it in mind. Thanks
Please do a hercules impact driver review.
I just bought the 6 amp paddle switch one. The one that say's "pro". I don't know how good it is yet because I haven't used it yet. The Hercules sounds great and got me thinking about switching. The thing that's stopping me is, I like the paddle switch instead of the other switch. If Hercules had the paddle switch I would have done switched already. Anyone have an opinion for me? I'll listen but just don't be rude about it. Take care my friends.
Considering the decent quality of the Hercules, it makes me wonder who does the manufacturing. Looks like it's either one of the cheaper lines from TTI or Stanley B&D with blue plastic and the Hercules name slapped on. I'll lean Stanley B&D and it being most like a Porter Cable.
I do service and I'm willing to give it a try
The same grinder, with some very minor visible differences such as the shape of the handle bar, is being sold here in Finland under the Biltema brand for 21.50€ which is about $25. Since we're in Europe it is naturally a 230V version. The power rating is 700W. I had the previous, nearly identical model for about 5 years and used it quite extensively in some pretty heavy duty work, until it finally broke a couple of days ago. One of the copper contacts in the commutator had come off, which means that you cannot fix it by replacing the carbon brushes, because the gap in the commutator will eat away and destroy the brushes instantly. The machine was definitely worth the price.
By the way, did you mention in the video that the quick lock mechanism actually allows you to detach the guard and not merely adjust it, which is a very useful feature?
Probably a decent deal with a 20% coupon. Time will tell. However, there are some proven Hitachi grinders on Amazon for $35-40 as well.
I got the sorta cheap one and so far it's held up well. really give her hell beveling 8in pipe. gets hotter than a 2$ pistol but haven't smoked her yet. so all in all for under 30$ so far it's held up
Update.. killed 2 mid level ones.. let the smoke out. Have Hercules now if it dies I'll just buy a 2nd Milwaukee fuel
chris jones.... How is the "pro" model grinder? The 6 amp one with the paddle switch?
Be great if you compared the hardness of the brushes. The cheap tools have super soft brushes that turn to powder very quickly.
I've heard pieple say it's best to have soft brushes then have to replace the rotor.
Si serán buenas
First off as tool head and gearhead thank you for spending your monies and time. 2nd honestly with Hercules it's in pro tool cost they are gonna have to prove themselves. I got 4 grinders 2 dewalt u.s. made, one bosch and one Chicago electric... I use the c.e. short light stuff. And at the cost of ten bucks I'm not too upset. But a lot of hazard fraught stuff has been failing me and i upgrade to dewalt etc. I'm a weird duck though... a farmer winter wheat, a harris county deputy and ffl. But I build or make most stuff I want and hate any lost time. Whether a tool breaks or not and can be returned sounds great. Till its 100 plus miles and 2 hours of my time.
How about this one? BLACK+DECKER BDEG400 6.5-Amp Angle Grinder, 4-1/2-Inch
Love your review, more to the point than AVE :-)
I have all three of these and while I enjoy each. The Hercules is the nicest and smooth as butter. The dark blue CE paddle is a damn work horse but vibrates a lot. The cheap $10 one has good feels but lacks power, don’t get me wrong it can still do a lot but you really have to let the tool do the work.
The only reason I have a Hercules is because everytime I element back for a CE dark blue $29 paddle grinder (seriously they are work horses) they were out so finally I said F-It.