This also worked perfectly on my 2012 FJ. I found it helpful to write the steps down so I could take them to the car (and leave them there for next time). Start with key removed, and only driver’s door open... • Insert and remove key twice • Close and open door twice • Insert key once • Close and open door twice • Insert key and leave it in • Close door • Cycle key through to “on”, then off once (twice if you want to overwrite previous key matches instead of just adding a new key). • Remove key (Car will cycle locks to acknowledge programming mode) • Press Lock and Unlock buttons together, 1 to 1.5 seconds • Press lock button on Fob once • Car should cycle locks once to acknowledge Repeat previous three steps for adding additional keys at the same time
FYI, found this out the long way but if you disconnected the plug under the steering wheel to turn off the annoying chime then this wont work. You have to plug that connector back on for this to work.
did you ever do the video to program the key? The dealer just charged me $350 to program a new key that did not have a remote...the plan key with the plastic.😢
Didn't work for me so i found another video same procedure except you have to close and open doors twice both times. So here arr the steps: 1. Driver door open 2. Insert key in ignition and remove twice 3. Close door and open twice 4. Insert key in ignition and remove once 5. Close door and open twice 6. Insert key in ignition and close door 7. Turn key to ignition position 8. Switch off and remove key If the door locks and unlocks automatically you are in programming mode. Hold down both lock and unlock keys of the remote you wanna program for 2 seconds then hit the lock button on the remote. If the door lock it means the remote was programmed successfully.
I realized that mine isn’t working. Then again, then I open my door, the door symbol doesn’t show up in the dash. I’m assuming that’s why. Also, when I put my key in the ignition, it doesn’t make the beeping sound.
This also worked perfectly on my 2012 FJ. I found it helpful to write the steps down so I could take them to the car (and leave them there for next time).
Start with key removed, and only driver’s door open...
• Insert and remove key twice
• Close and open door twice
• Insert key once
• Close and open door twice
• Insert key and leave it in
• Close door
• Cycle key through to “on”, then off once (twice if you want to overwrite previous key matches instead of just adding a new key).
• Remove key
(Car will cycle locks to acknowledge programming mode)
• Press Lock and Unlock buttons together, 1 to 1.5 seconds
• Press lock button on Fob once
• Car should cycle locks once to acknowledge
Repeat previous three steps for adding additional keys at the same time
So this works with fj cruiser keys bought online without chipped worked on?
I LITERALLY TRIED OTHER VIDEOS AND THIS IS BY FAR THE BEST!!! Thankyou !!!!!!!
This worked with my 2010 FJ. Appreciate the video. Easy to follow
Thank you! Worked like a charm, mine is an '07 and I bought the key with the integrated remote
The video sound is pretty good, beyond my imagination
This is the easiest and explains how to do it the best. Still took me a couple times though. So don't get discouraged.
FYI, found this out the long way but if you disconnected the plug under the steering wheel to turn off the annoying chime then this wont work. You have to plug that connector back on for this to work.
I've been looking for that chime speaker for 6 months, you may have just saved my sanity. My FJ is Japan spec and the chime goes off above 80mph
Do you have the link where you purchased them from?
hey, do you need to have the convenience package for this to work?
did you ever do the video to program the key? The dealer just charged me $350 to program a new key that did not have a remote...the plan key with the plastic.😢
Didn't work for me so i found another video same procedure except you have to close and open doors twice both times. So here arr the steps:
1. Driver door open
2. Insert key in ignition and remove twice
3. Close door and open twice
4. Insert key in ignition and remove once
5. Close door and open twice
6. Insert key in ignition and close door
7. Turn key to ignition position
8. Switch off and remove key
If the door locks and unlocks automatically you are in programming mode.
Hold down both lock and unlock keys of the remote you wanna program for 2 seconds then hit the lock button on the remote. If the door lock it means the remote was programmed successfully.
You legend.
This also worked for me 2007 fj
I realized that mine isn’t working. Then again, then I open my door, the door symbol doesn’t show up in the dash. I’m assuming that’s why. Also, when I put my key in the ignition, it doesn’t make the beeping sound.
Thank you!
macam mana nak buat?
Will this also work on the 2011 model
I don't see why not..
Did it work
Way yoy dont instull the campas for fj
the sound is not good I am quite disappointed