Quick question , where do you find the option to set the clock , i like to have view of the time when riding , so i would like the time to be displayed permanently, it seems it disappears after configuring the settings ?
Hey dude. Great channel and great overview of the egg rider. One question…. Would you have a link to optimal settings for egg rider v2 and bafang mid drive 500w motor 37v battery? Thanks in advance! Matt
Great review.! I would love to have the capabilities to adjust the motor controllers parameters. But unfortunately the bike that I have has a Bafang G510 motor with the CAN interface. Which I understand EggRider does not support. Do you guys sell a G510 motor with the UART interface. If not do you know where I can purchase one. The current controllers settings are way too aggressive. Assist level 1 always tries to accelerate me up to 30 mph. Also the motor does not shut off immediately when I stop pedaling, which is very dangerous. The bike is set up as a cargo bike so I'm assuming that's the reason for these settings. Thanks
@@brianbassett4379 It saves space and cleans up the handlebar area and it has a bluetooth connection to your phone which becomes the display with the same information displayed on your larger phone.
I only wish you had London UK, stores, as I would love to get a full e-bike build on a Urobike folding, mag wheels, great looking bike & brand new also my own day to day e-bike needs unrestricting any pointers for any help In London UK, would be so greatfully appreciated. Excuse spelling etc but Iv split my finger.
is there anyway to flash/get the firmware on a SW102 ebike display .to make your own eggrider .they are to expensive .for me who only wants to increase the pedal assist from 6 to 15 on my radd power bike plus (eu)
Question…if you make these changes are they in the motor controller or the EggRider? Like if I take the display off and put a 850C will all the changes and parameters stay with the eggrider or on the bafang controller?
The Eggrider can be used to program the BaFang controller with an App. It's glitchy and the Eggrider is a pain to read and needs software updates at irregular intervals. You can program your BBSXX with a laptop and programing cable and never use it again. Look into the 500C display.
@@brianbassett4379 You don't need a laptop to program. Just use the speeed app with a USB C to USB female adaptor and the programming cable which connects straight to your phone.
How do I know what display I need I have a m620 my display is OP CI8C-11 702PIV4285217 my bike made from biketrx in Canada the plug has a triangle plug hope you can help
You need to activate the Eggrider V2 app on your phone. It'll ask for the Store Name and Order Number and your email in order to activate the application and connect to your egg rider via bluetooth.
Not the best, hard to see in sunlight and mine keeps losing the total milage, eggrider informed but did not have a fix. I prefer a larger colour display, the only reason to have this is to lock/switch to low power mode for area regulations.
this is best thing ever happened to ebike community in Europe, here police can confiscate your bike for tests , and if you going to set mode changing only to app they will have zero access to real power anymore and bike will go only 25 km/h. Best setting is to set starting display always with road mode and changing to offroad only in your phone, it will cost you some time to start ride but it will save your bike from destruction by police in Netherlands for example. Also you can change M button to long press for mode changing but there is possibility that mr popo will find out that while testing bike in police station. For me this is 10000 more important function than rest of them, this is similar to s73 aftermarket app that allows you to come back to legal mode just with turning battery off and on. I cant wait for my display delivery, hope cups didnt destroy my bike in mean time.
Expensive don't understand why people like them so much considering the cost. I use Google maps on my phone for navigation I also have another app for rides. Wousl never give then my money for what it does
Any way to get cruise control? It's such a nice feature!
Does the max speed that you set here 9:14 overrides the max speed that is set here 15:44 ?
THE MANUAL SUGGESTS BACKING UP SETTINGS B4 UPDATING FIRMWARE. HOW IS BACKUP PERFORMED? ALSO UPDATING FIRMWARE?
Can you said if the eggrider is compatible with all display ?
Quick question , where do you find the option to set the clock , i like to have view of the time when riding , so i would like the time to be displayed permanently, it seems it disappears after configuring the settings ?
Do they work with hub motors? I see they all say mid-drive.
Does the programing work with the Bafang hub motors?
same question, need an answer?
Hey dude. Great channel and great overview of the egg rider.
One question…. Would you have a link to optimal settings for egg rider v2 and bafang mid drive 500w motor 37v battery?
Thanks in advance!
Matt
Please, do you know if egg rider is compatible with bafang g062 rear hub motor?
will this work with my ride 1up roadster? the stock display looks like the eggrider but it cant control my lights
Can you change the voltage capacity? I want to add a bigger battery with a bigger controller
48v but you can mod them to work with 72v... To my research don't take my word for it
Hi I can’t get my EggRider v2 to connect with my app on my iPhone any suggestions??
What does the altitude accuracy threshold do? Mine came stock on 66 but i see yours is at 20.
When i look on their website the only Bafang they make it for mid drive.. they dont have a model for Bafang rear hub motor?
Is the speed limit set to all pedal assist modes and throttle
I have a taleria ebike with an EggRider. Any way to connect the app to this simpler version of the EggRider
If you set throttle to pas 8, will that be what it is in pas 9 as well ?
Great review.!
I would love to have the capabilities to adjust the motor controllers parameters. But unfortunately the bike that I have has a Bafang G510 motor with the CAN interface. Which I understand EggRider does not support. Do you guys sell a G510 motor with the UART interface. If not do you know where I can purchase one.
The current controllers settings are way too aggressive. Assist level 1 always tries to accelerate me up to 30 mph. Also the motor does not shut off immediately when I stop pedaling, which is very dangerous. The bike is set up as a cargo bike so I'm assuming that's the reason for these settings.
Thanks
Once they are dialed in you never change them again. Why put up with the glitchy hard-to-see Eggrider for that?
@@brianbassett4379 It saves space and cleans up the handlebar area and it has a bluetooth connection to your phone which becomes the display with the same information displayed on your larger phone.
Does EggRider actually work with Golden Motor motors?? I need a system where I could easily switch my MP5 regen on or off.
No it does not . It works with bafang. For golden motor you can use our Bluetooth device to program it on the fly
Is this compatible with cyc motors?
Hi. Is it possible to disable rides recording?
Hi, how fragile is the eggrider?
After turning on my bike the eggrider says locked how can I unlock without the app?
I only wish you had London UK, stores, as I would love to get a full e-bike build on a Urobike folding, mag wheels, great looking bike & brand new also my own day to day e-bike needs unrestricting any pointers for any help In London UK, would be so greatfully appreciated. Excuse spelling etc but Iv split my finger.
As GPS Data is an option, why do we need Wheel size to calculate speed?
How can you tell which motor you have??
If you buy this make sure it’s compatible with your motor, after many try’s I could not make mine work with Goldens help still no luck!
These are only compatible with BBSHD and BBSO2
Is this app compatible with the sw 102?
is there anyway to flash/get the firmware on a SW102 ebike display .to make your own eggrider .they are to expensive .for me who only wants to increase the pedal assist from 6 to 15 on my radd power bike plus (eu)
Question…if you make these changes are they in the motor controller or the EggRider? Like if I take the display off and put a 850C will all the changes and parameters stay with the eggrider or on the bafang controller?
The Eggrider can be used to program the BaFang controller with an App. It's glitchy and the Eggrider is a pain to read and needs software updates at irregular intervals. You can program your BBSXX with a laptop and programing cable and never use it again. Look into the 500C display.
@@brianbassett4379 You don't need a laptop to program. Just use the speeed app with a USB C to USB female adaptor and the programming cable which connects straight to your phone.
How do I know what display I need I have a m620 my display is OP CI8C-11
702PIV4285217 my bike made from biketrx in Canada the plug has a triangle plug hope you can help
triangle plug usually support can protocol, round one use uart on bafang motors.
would you send me the eggridder display to the UK 🙏
i HAVE A WHEELS IZE OF 20" X 1.75" - WHERE IS THIS OPTION ON EGGRIDER?
Is there a setting that will allow the elimination of brake switches ?
Need a walk threw or show us what you set you assists too.
If you have a BBSHD or 02 just use the factory setting. Ride it with no changes whatsoever and you will realize you don't need to tweak anything.
How do you connect the display to your phone?
Mit der Eggrider App
You need to activate the Eggrider V2 app on your phone. It'll ask for the Store Name and Order Number and your email in order to activate the application and connect to your egg rider via bluetooth.
Thanx!
I had one. Hated it. Sold it.
What did you get that was better?
Not the best, hard to see in sunlight and mine keeps losing the total milage, eggrider informed but did not have a fix. I prefer a larger colour display, the only reason to have this is to lock/switch to low power mode for area regulations.
this is best thing ever happened to ebike community in Europe, here police can confiscate your bike for tests , and if you going to set mode changing only to app they will have zero access to real power anymore and bike will go only 25 km/h. Best setting is to set starting display always with road mode and changing to offroad only in your phone, it will cost you some time to start ride but it will save your bike from destruction by police in Netherlands for example. Also you can change M button to long press for mode changing but there is possibility that mr popo will find out that while testing bike in police station. For me this is 10000 more important function than rest of them, this is similar to s73 aftermarket app that allows you to come back to legal mode just with turning battery off and on. I cant wait for my display delivery, hope cups didnt destroy my bike in mean time.
Expensive don't understand why people like them so much considering the cost. I use Google maps on my phone for navigation I also have another app for rides. Wousl never give then my money for what it does
i dont think that 32 kilometers per hour is you local speed limit 🙂
Depends. It is if he's in Canada.
Too small
Don’t mount it on the same side as the throttle, you’ll fry the display. Thank me later
how
Yeah how ?
@@viktorreznov1548probably magnet's