I do a lot with polymer clay (plastic) I love what you are doing BUT you really need to get an old toaster oven and do this outside. Smaller batches yes. But at 500’ you are breathing the off gas of the paint. Fans won’t protect you. As someone who got asthma at 60 years old I can tell you you must protect your lungs. You’ll be thankful later. Am I going to try this? Yes!
I use an old toasteroven that I put outside on a table for anything that creates fumes. Yes I have to do smaller batches and more time but I have found that a better option then dealing with some of the bad fumes that lingered even with fans on from some of my crafting .
@@kpoppaen8751 most of the toaster ovens have a bake setting with temps up to 450F some even higher. So i just set it at the temp I need and bake for the results wanted.
I was wondering if, I could use a toaster oven for this, thank you, for answering my question. I was going to donate my toaster oven but, now I guess I'll be keeping it. 😊
@@darchelleskipwith3094 Thank you so vveeerrryyy much! ♥ I cut a big handful and painted them last night and they should be dry now but will bake them in the morning. I, however, just... HAD to finish cutting every single one of the blank cds I had (which was 4" high. Not sure if it was 50 or 100 lol but my thumb feels like it was 100! LOL!) and are putting them together to get ready to paint more!
I would paint each cd a swirl of colors, let them dry, then draw the lines with a micro tip sharpie before cutting. If you score the sharpie lines before cutting you won’t chip the paint. That way you don’t have to paint individual squares after cutting. Save time! Also you can fol the foil backwards after baking to pop the tiles off more easily.
3/4 of an inch = 1,9cm (make it 2cm). 500°F = 260°C. ... That was cool! Also, not a lot of tutorials remember to make prevention about the toxicity of the material. There are lots of people experiencing problems with epoxy artwork because of the lake of advice in the tutorials.
The rubberish cutting mats used in sewing are FANTASTIC for crafting! They come with grids and other measuring stuff printed on them already. It's been one of my best investments for crafting. 😁
There are also plastic scoring knives which work like glass cutting tools. Handheld electric hot knives work with regular X-acto blades, or get a good old pair of laminate cutting shears from your local hardware store. just a few suggestions on tools that might be a little less hard on your hands.
These are so pretty!! What a GREAT IDEA!! Definitely going to do this!! I bet you could add mica, glitter, or foil pieces too. I think this could really be good to add all kinds of goodies to them. If the layers stick good enough to the bottom layer, maybe even book pages. But that might burn?? I can feel my brain thinking of many different ways to decorate between layers. I love this idea!! I expect you could use hard plastic like from packaging or food plastic boxes. Or Shrinky Dink acetate. Punch hole in corner for charms for journal jewelry. Unlimited ideas I think. Thx for the great video. Austin,TX USA
A sharp enough exacto knife should be able to give you a score you could snap off along. Couple that with a cutting mat that has a grid already on it and your production time would be cut down dramatically with the investment of about $20 bucks in useful tools.
Do not use your regular oven for crafts!!! This process releases a lot of toxic fumes. Get a toaster oven and dedicate it to crafts and use it only in a well ventilated space. Don't make food in the same oven.
I watched a few other tile videos but yours was the best. You gave good instructions and I love your tiles. My landlady threw out a bunch of CD's yesterday and we dug them out of the trash today after I saw your video. 🤗
I’ve done this and it’s so fun! Just a couple notes to add: when you’re drawing your grid lines.. First: it helps to apply a small piece of tape on two ends to hold it in place for good straight lines. Second: don’t use too much paint.. it’ll squeeze out and make a mess of your edges…. And third: I also set the oven to 500 degrees but cut the time down to 13 minutes instead of 15. I’m getting better and better! I love this project!
Use graph paper instead of taking the time to draw lines. That will also allow you to do a couple sizes on each CD. This is an awesome idea, I was going to sell an old toaster oven but I'm keeping it now!
Soooo cool I love it. You seem like such a beautiful human being and wanted to let you know for your safety and those you love second hand stores for very cheap sell mini ovens. Sometimes the toxic of the paint and CD are left behind & when you cook regular food in your stove after, the toxicity can be left behind and hurt your health. Maybe have a mini toaster oven dedicated just for crafting and the other just for cooking. Loved the tile idea sooo much.
thank-you all for the safety heads up i was getting ready to copy it for my art teacher and now i will add the safwty part too. every crafter seems to stick together with each other on sharing tips, patterns and safety advice. i also know crafters to be the most generous people i know.
*{Easy way to remove the marker lines}* Throw all of the cut pieces into a ziploc bag, pour in a healthy dash of rubbing alcohol (the amount you use depends on how many pieces are in the bag)-seal it up and then shake/rub the bag around for several seconds, until they’re all clean. Then I fish them out and put them on a towel to dry. If I’m doing a LOT, I will reseal the bag to keep the alcohol from evaporating, so I can use it again and again-only adding a little bit of new alcohol as needed.👍
I'm going to try using my Crop-o-Dile to punch circles out of the CDs and do everything else the same. Then I'll use the little "buttons" as embellishments on my handmade cards. Thanks for the tips!
I have 2 almost full spindles of blank cds (the old way to back up files from computers) I never used. Probably at least 150. I have the supplies if I can just get up the energy to do this. Great project!
Same here, down to finding the energy to do it. We've been 101-107 for several weeks, no end in sight. So I'm thinking, since she suggested drying them before baking, we could stack them in layers in some closed containers and put aside for cooler weather to bake. Meanwhile we figure out how we want to use them. Maybe scout out a few thrift shops and junk piles too. 😉
What a wonderful idea with beautiful results. I definitely want to try this one. Thank you so much for not only sharing this idea but teaching it step-by-step.
Oh wow, I have never seen this idea before. Now I know what I am going to do with a lot of unwanted cds and dvds that I was wondering what to do with. Thank you very much. Your tiles look fab.
I love the music!! You have excellent taste. The best of anyone on RUclips! (I've started on cello at age 3, then switched to bassoon at age 11,,,and now I play in a major orchestra). Thank you for supporting classical music. ❤
Fabulous! Fun project, excellent video. My suggestion to anyone trying this or similar projects is wear safety glasses while cutting and do your curing (baking) outside. Use a dedicated oven, never used for food again. I got a big toaster oven, two shelf model for under $10 at a yard sale. I use it outside with a stand fan nearby blowing away from my working area. Safety first is a real thing.
Thanks for this wonderful tutorial! These tiles somewhat resemble enamel on copper - something l have always wanted to do. I'd like to try affixing tiles to a window or light sconce for a faux stained glass effect. Looks like everyone's getting wind chimes for Christmas this year. Lol!
I have been saving ANY old cd for years (as well as dryer lint, boxes, shiny paper, & lots of other things LOL), just waiting for the right project to present itself... BINGO! Thank you so much for sharing this.. which I just "happened" to stumble on! I am wanting to do more mosaics too, so you have covered all the bases 😁 I'm going to subscribe & check out your channel now ~ God Bless you!
Dryer lint makes good fire starters... Or pin prick art (felt art?) I swear I saw Martha Stewart make a sweater for her dogs out of her dogs fur... but that could have also been an SNL skit. I'm not sure lol
This is so amazing. I love the effect. Thanks so much for sharing. I have a stack of blank cds & this is a terrific way to use them rather than toss them.❤
I have found that rubbing alcohol will remove sharpie/permanent marker from most objects. Try adding a little alcohol to a cotton ball and wipe each tile after cutting if you don't want black edges or an x in the center tiles. With black marker, the sooner you remove it the better results (in other words, don't wait 6 months and expect the best results!) 💖🌞🌵😷
Acetone or nail polish remover would also work in the event of not having any rubbing/isopropyl alcohol. Not sure which of the 3 would work the best though.
@@RuinedTemple , be careful using acetone on plastic... acetone will melt plexiglass and other plastics. And it will take the finish off objects if you happen to splash any. Rubbing alcohol doesn't do any of these things... it just works on the marker. 💖🌞🌵😷
@@suzisaintjames My apologies. I had based my comment off of a recent personal experience with using acetone on one of those frosted translucent plastic open-top totes with the handle in the middle that are often used for storage & organization in or on bathroom cabinets, cupboards, drawers, shelves, countertops, or under the sink for all sorts of smaller products, supplies, tools, etc. that ppl tend to store there. It had some kind of paint that had spilled & dried in the bottom of it, so I poured a small amount of acetone in the bottom, just enough to cover the paint, & waited a few hours before dumping it & rinsing it out. It removed the paint without any melting issues, but I’m sure that it’s a much different kind of plastic than those thin l’il CDs! Probably best to stick with alcohol for this one, folks! This tut calls for melting by way of heat after you sandwich those colors in, NOT by way of chemicals before you even get the chance. 😉
it would be ideal to use an oven you dont use for cooking - same goes for reheating circuit boards, very bad vapors land on the walls and then circulate everytime you reheat it.
The terry cloth to set on while painting seems like a great idea, would help hokd a bit while painting so it doesn't slide around. Great video, thank you
Wow…this is just the thing I needed today to boost my spirits on a gloomy day! Those colors look gorgeous and I already have ideas for jewelry and some decorated flower pots. Thanks so much for this post! ❤
Has anyone tried using them as wall tiles for tiling kitchen walls. We're in the process of refitting ours and would love to make 2 inch squares to use in this way. I would be grateful for anyones thoughts on this. Absolutely love them. One of the gest you tube craft vids I've ever come across. Thank you. X Kate in London UK
I was totally thinking these would look so cool in a kitchen! You could probably cut the cost down on that significantly using these. I feel like the install process would be the same as using resin tiles.
OMGosh, this is an amazing idea! How did you ever come up with this?? Your little tiles are stunning and I liked the bubbled ones just as much! Thanks!
I very much enjoyed your video. Thank you for the inspiration. I made a large batch of leaf-shaped pieces which I hope to use in a mobile. I agree with earlier suggestions on using a toaster oven outside.
When you started scratching the label.. I was all "oh hell nah! 1 disc will take all day" and then you pulled out the magic tape! And I was like 😮😳🤯🤣😁!
Always use a specified oven for any plastic work! And have it outside if possible. Residual materials in the oven reheat each time you use the oven and cause these toxins to enter your airspace!!!!!!
You can also get a scissor and blade for scoring glass that would make easy work of cutting the plastic cds into the desired specs. Refers to what Robin masters was saying. Just make sure to have a cutting mat and r cardboard as a base surface so you don’t damage your table or desk.
Great idea! If you intend to make a lot of tiles, it might be a good idea to buy a paper cutter. We can find old ones at flee markets or where they sell second hand office material.
Absolutely beautiful work & your video was very clear & easy to understand. Clear & consise & not too long- like some others - so I didn't get bored. Thank you for sharing your beautiful work & creativity. Much love sister. Anüshka Veriato. England 🇬🇧🌈✌️🫶
You should definitely clean the tiles after you've cut them instead of before. The cutting process will cover the plastic in fingerprints and rubbing alcohol actually removes most marker inks, so two birds with one stone
Really interesting ideas. Just a warning: do not bake the plastic tiles near pet birds, they have a very sensitive respiratory system and the fumes may kill them.
I noticed that the foil that was being stripped off with the tape looks pretty. If that was cut into small bits and placed onto the plastic with the paint, it will add a nice sparkle. And glitter maybe?
I am so glad I stumbled upon this video. I participated in the whole process up to the baking. Its super fun. It was a bit difficult to completely clean the CD. I had no alcohol in the house. Your tiles turned out really nice and it gives me many creative ideas. Maybe you can also just use two thin sheets of Plexiglas. you can also do everything with paint first and then cut pieces. But hey, lots of room to experiment. Thank you very much and many blessings.
this is a fantastic project! soooo inventive. now off to comb garage sales for old cds!!! thank you for a GREAT project presented so clearly and easy to understand. love your voice too btw. 💕
If you boil those cds for about 10-15 minutes after you've cleaned them, they soften and can be easily cut with scissors.
How long do they stay soft? Would you have time to Trace your grid lines on the cd before cutting or do the harden back up rapidly?
@@KimWyattsart draw your grid with waterproof markers and they will stay on
Is the first time I see an intelligent use for recycled cd.
Thanks for the tip.
This looks like an interesting way to recycle those old CDs. They're pretty. I wonder if I could tile my kitchen counters.
I do a lot with polymer clay (plastic) I love what you are doing BUT you really need to get an old toaster oven and do this outside. Smaller batches yes. But at 500’ you are breathing the off gas of the paint. Fans won’t protect you. As someone who got asthma at 60 years old I can tell you you must protect your lungs. You’ll be thankful later. Am I going to try this? Yes!
Thank you because I have asthma myself and want to do this but I need be safe too.
I use an old toasteroven that I put outside on a table for anything that creates fumes. Yes I have to do smaller batches and more time but I have found that a better option then dealing with some of the bad fumes that lingered even with fans on from some of my crafting .
I was going to do this too but not sure what temp or how long. How do you do yours?
@@kpoppaen8751 most of the toaster ovens have a bake setting with temps up to 450F some even higher. So i just set it at the temp I need and bake for the results wanted.
I was wondering if, I could use a toaster oven for this, thank you, for answering my question. I was going to donate my toaster oven but, now I guess I'll be keeping it. 😊
@@darchelleskipwith3094 Thanks for including your 'F', makes a lot more sense (and cost effective)! (450F = approx 230C) Australia 🤣🤣
@@darchelleskipwith3094 Thank you so vveeerrryyy much! ♥ I cut a big handful and painted them last night and they should be dry now but will bake them in the morning. I, however, just... HAD to finish cutting every single one of the blank cds I had (which was 4" high. Not sure if it was 50 or 100 lol but my thumb feels like it was 100! LOL!) and are putting them together to get ready to paint more!
I would paint each cd a swirl of colors, let them dry, then draw the lines with a micro tip sharpie before cutting. If you score the sharpie lines before cutting you won’t chip the paint.
That way you don’t have to paint individual squares after cutting. Save time! Also you can fol the foil backwards after baking to pop the tiles off more easily.
3/4 of an inch = 1,9cm (make it 2cm).
500°F = 260°C.
...
That was cool! Also, not a lot of tutorials remember to make prevention about the toxicity of the material. There are lots of people experiencing problems with epoxy artwork because of the lake of advice in the tutorials.
The rubberish cutting mats used in sewing are FANTASTIC for crafting! They come with grids and other measuring stuff printed on them already. It's been one of my best investments for crafting. 😁
My local dollar store has small versions of these green grid mats for $1!
There are also plastic scoring knives which work like glass cutting tools. Handheld electric hot knives work with regular X-acto blades, or get a good old pair of laminate cutting shears from your local hardware store. just a few suggestions on tools that might be a little less hard on your hands.
Thank you for the great suggestions!!
These are so pretty!! What a GREAT IDEA!! Definitely going to do this!! I bet you could add mica, glitter, or foil pieces too. I think this could really be good to add all kinds of goodies to them. If the layers stick good enough to the bottom layer, maybe even book pages. But that might burn?? I can feel my brain thinking of many different ways to decorate between layers. I love this idea!!
I expect you could use hard plastic like from packaging or food plastic boxes. Or Shrinky Dink acetate. Punch hole in corner for charms for journal jewelry. Unlimited ideas I think.
Thx for the great video.
Austin,TX USA
@@michiganmuck1716 wow well done. What brilliant ideas , it's a lot of hard work, but well worth the end results
Thank you
Yes! My pyrography pen has a stencil cutting tip, and that works extremely well for fine cutting of plastic.
A sharp enough exacto knife should be able to give you a score you could snap off along. Couple that with a cutting mat that has a grid already on it and your production time would be cut down dramatically with the investment of about $20 bucks in useful tools.
Do not use your regular oven for crafts!!! This process releases a lot of toxic fumes. Get a toaster oven and dedicate it to crafts and use it only in a well ventilated space. Don't make food in the same oven.
Wow. They would make really pretty buttons.
I watched a few other tile videos but yours was the best. You gave good instructions and I love your tiles. My landlady threw out a bunch of CD's yesterday and we dug them out of the trash today after I saw your video. 🤗
So happy to hear this! Hope to hear back from you if you make these! Thanks for the positive feedback 😊📀✂️
Yes, I agree! This is the first I've watched that gave the tip of starting with a scratch to remove the label!
I totally agree. I just finished watching another video and was totally confused for such an easy craft.
Ну очень круто ! Я такого еще не видела ! Спасибо за идею !
In the old days we used to make flower pots from unwanted 78s.
I’ve done this and it’s so fun! Just a couple notes to add: when you’re drawing your grid lines.. First: it helps to apply a small piece of tape on two ends to hold it in place for good straight lines. Second: don’t use too much paint.. it’ll squeeze out and make a mess of your edges…. And third: I also set the oven to 500 degrees but cut the time down to 13 minutes instead of 15. I’m getting better and better! I love this project!
Linda, be sure to read the recent warning about how using your oven can cause cancer! It's the first comment on the page but was left after yours.
..
Do not put that in the oven it admits toxic fumes you’re gonna kill yourself
Beautiful music. Thank you so much
Use graph paper instead of taking the time to draw lines. That will also allow you to do a couple sizes on each CD. This is an awesome idea, I was going to sell an old toaster oven but I'm keeping it now!
I have toaster oven for polymer clay only
Wow! Very cool! I enjoyed seeing your artwork with the tiles as well! 🌟🌟🌟
Soooo cool I love it. You seem like such a beautiful human being and wanted to let you know for your safety and those you love second hand stores for very cheap sell mini ovens. Sometimes the toxic of the paint and CD are left behind & when you cook regular food in your stove after, the toxicity can be left behind and hurt your health. Maybe have a mini toaster oven dedicated just for crafting and the other just for cooking. Loved the tile idea sooo much.
thank-you all for the safety heads up i was getting ready to copy it for my art teacher and now i will add the safwty part too. every crafter seems to stick together with each other on sharing tips, patterns and safety advice. i also know crafters to be the most generous people i know.
Its the glue that helps stick us together.
@@christophersperrin1429 I see what you did there. 😆💗👍
@@christophersperrin1429 😅💌
@@christophersperrin1429
Lol!
😂
I like that you are upcycling things and giving them new life! They are a lot of work, bit very pretty!!
*{Easy way to remove the marker lines}*
Throw all of the cut pieces into a ziploc bag, pour in a healthy dash of rubbing alcohol (the amount you use depends on how many pieces are in the bag)-seal it up and then shake/rub the bag around for several seconds, until they’re all clean. Then I fish them out and put them on a towel to dry.
If I’m doing a LOT, I will reseal the bag to keep the alcohol from evaporating, so I can use it again and again-only adding a little bit of new alcohol as needed.👍
I'm going to try using my Crop-o-Dile to punch circles out of the CDs and do everything else the same. Then I'll use the little "buttons" as embellishments on my handmade cards. Thanks for the tips!
I have 2 almost full spindles of blank cds (the old way to back up files from computers) I never used. Probably at least 150. I have the supplies if I can just get up the energy to do this. Great project!
Sounds like you have a "group project" idea! Kids, grandkids, book club or craft friends! The more the merrier!
Same here, down to finding the energy to do it. We've been 101-107 for several weeks, no end in sight. So I'm thinking, since she suggested drying them before baking, we could stack them in layers in some closed containers and put aside for cooler weather to bake. Meanwhile we figure out how we want to use them. Maybe scout out a few thrift shops and junk piles too. 😉
My husband threw out a bunch of unneeded CDs, and I told him I wanted them. When I show him this video, he will save them for me in the future.
"YOU GO GIRL"
You are so Smart...
This turned out BEAUTIFUL... WOW.
What a wonderful idea with beautiful results. I definitely want to try this one. Thank you so much for not only sharing this idea but teaching it step-by-step.
This captivated me from the very beginning! This is so clever and the video is well done. Thank you for sharing!❤
This is good! Really, really good stuff here. You are a genius! I have tons of old cds just waiting for something like this!
Oh wow, I have never seen this idea before. Now I know what I am going to do with a lot of unwanted cds and dvds that I was wondering what to do with. Thank you very much. Your tiles look fab.
I love the music!! You have excellent taste. The best of anyone on RUclips! (I've started on cello at age 3, then switched to bassoon at age 11,,,and now I play in a major orchestra). Thank you for supporting classical music. ❤
Fabulous! Fun project, excellent video. My suggestion to anyone trying this or similar projects is wear safety glasses while cutting and do your curing (baking) outside. Use a dedicated oven, never used for food again. I got a big toaster oven, two shelf model for under $10 at a yard sale. I use it outside with a stand fan nearby blowing away from my working area. Safety first is a real thing.
thanks❣ dear for precaution
CD fragments are WICKED sharp, so yes, wear eye protection!!!
I am so glad a stumbled onto this video. I have 14 old CDs I have been holding onto for a reason. I finally found thorough and inspiring information.
Thanks for watching. Good luck.
I appreciate your choice of music ...
As well as your detailed explanation and demonstration.
Thanks for this wonderful tutorial! These tiles somewhat resemble enamel on copper - something l have always wanted to do. I'd like to try affixing tiles to a window or light sconce for a faux stained glass effect. Looks like everyone's getting wind chimes for Christmas this year. Lol!
With a paint pen or metallic acrylic paint, you could add copper-colored borders to your tiles.
I have been saving ANY old cd for years (as well as dryer lint, boxes, shiny paper, & lots of other things LOL), just waiting for the right project to present itself... BINGO! Thank you so much for sharing this.. which I just "happened" to stumble on! I am wanting to do more mosaics too, so you have covered all the bases 😁 I'm going to subscribe & check out your channel now ~ God Bless you!
I firmly believe that "enough" of something means I finally see what it's good for!
Me toooo
Dryer lint makes good fire starters... Or pin prick art (felt art?) I swear I saw Martha Stewart make a sweater for her dogs out of her dogs fur... but that could have also been an SNL skit. I'm not sure lol
Dryer lint is great for making felt.
@@maryinminnesota3398 I remember seeing crafts people were making with dryer lint!
This is something I could do! You don't waste words. I greatly appreciate that. Thank you for sharing this clever idea.
This is so amazing. I love the effect. Thanks so much for sharing. I have a stack of blank cds & this is a terrific way to use them rather than toss them.❤
This is so cool. And useful too. There are many possibilities for using these creatively.
Thank you for sharing
Thought this might be interesting, but the most interesting thing about it is the Ravel string quartet playing in the background!
I have found that rubbing alcohol will remove sharpie/permanent marker from most objects. Try adding a little alcohol to a cotton ball and wipe each tile after cutting if you don't want black edges or an x in the center tiles. With black marker, the sooner you remove it the better results (in other words, don't wait 6 months and expect the best results!) 💖🌞🌵😷
Acetone or nail polish remover would also work in the event of not having any rubbing/isopropyl alcohol. Not sure which of the 3 would work the best though.
@@RuinedTemple , be careful using acetone on plastic... acetone will melt plexiglass and other plastics. And it will take the finish off objects if you happen to splash any. Rubbing alcohol doesn't do any of these things... it just works on the marker. 💖🌞🌵😷
@@suzisaintjames
My apologies.
I had based my comment off of a recent personal experience with using acetone on one of those frosted translucent plastic open-top totes with the handle in the middle that are often used for storage & organization in or on bathroom cabinets, cupboards, drawers, shelves, countertops, or under the sink for all sorts of smaller products, supplies, tools, etc. that ppl tend to store there.
It had some kind of paint that had spilled & dried in the bottom of it, so I poured a small amount of acetone in the bottom, just enough to cover the paint, & waited a few hours before dumping it & rinsing it out. It removed the paint without any melting issues, but I’m sure that it’s a much different kind of plastic than those thin l’il CDs!
Probably best to stick with alcohol for this one, folks!
This tut calls for melting by way of heat after you sandwich those colors in, NOT by way of chemicals before you even get the chance. 😉
it would be ideal to use an oven you dont use for cooking - same goes for reheating circuit boards, very bad vapors land on the walls and then circulate everytime you reheat it.
Wow that's fantastic , thank you very much for showing this , what a wonderful thing to do and great for recycling . I will definitely have a go .
I like your pallet colors.
Very beautiful georgeos color tiles I 💖 it u do amazing excellent awesome job 🥰💐👍💖🤗
I LOVE the ones with the bubbles, they are my favorite.
Wow! I love it. Am going to give this a try. Thank you so much for the simple step by step inspirational tutorial! 🙏
Love this project.. thanks for sharing 😻
Your boundless creativity is inspiring. These are so beautiful. ❤
Oh my gosh! This adds an entirely new set of ideas for meee! Thank you so much!
Wonderful idea and great choice of music! Ravel is my favourite composer!
The terry cloth to set on while painting seems like a great idea, would help hokd a bit while painting so it doesn't slide around. Great video, thank you
Those came out so Flippin cool! Thank you so much for sharing it with us
They look stunning, thank you for sharing.
Wow…this is just the thing I needed today to boost my spirits on a gloomy day! Those colors look gorgeous and I already have ideas for jewelry and some decorated flower pots. Thanks so much for this post! ❤
I am impressed. They turned out beautiful. Thank you
Thank you for the wonderful video!! Really great idea!!
Has anyone tried using them as wall tiles for tiling kitchen walls. We're in the process of refitting ours and would love to make 2 inch squares to use in this way. I would be grateful for anyones thoughts on this. Absolutely love them. One of the gest you tube craft vids I've ever come across. Thank you. X Kate in London UK
Love to see what you have accomplished on RUclips
I was totally thinking these would look so cool in a kitchen! You could probably cut the cost down on that significantly using these. I feel like the install process would be the same as using resin tiles.
What great idea! I love how pretty they turned out and all of your projects looked cool as well!
OMGosh, this is an amazing idea! How did you ever come up with this?? Your little tiles are stunning and I liked the bubbled ones just as much! Thanks!
I very much enjoyed your video. Thank you for the inspiration. I made a large batch of leaf-shaped pieces which I hope to use in a mobile. I agree with earlier suggestions on using a toaster oven outside.
So good
Well done
Love your choice in medium.
Skys the limit in design.
Thanks.
Love this idea, except for the toxic fumes bit! Wondering if there is a way of creating tiles without heating.
Like using the sun ... I wonder!!!
@@kittybear2006 be careful not to start a fire.
Super creative! Thanks for making this video and sharing it.
😲 WOW!! Que c'est génial!!👍🏻
Et tout ce que vous faites avec c'est magnifique ❣️
Merci beaucoup pour le partage ❣️
💝💖💝
Absolutely stunning. Thank you so much for this how-to.
Superb idea. Amazing put. Nice watching your video.
Appreciate your comment! Thanks for watching 🙂
I like this process - I can imagine making jewelry - Great fun
These are so wonderful - I gotta do this. Off to hunt down some old CDs! Thank you for the inspiration!
When you started scratching the label.. I was all "oh hell nah! 1 disc will take all day" and then you pulled out the magic tape! And I was like 😮😳🤯🤣😁!
Always use a specified oven for any plastic work! And have it outside if possible. Residual materials in the oven reheat each time you use the oven and cause these toxins to enter your airspace!!!!!!
Superliked and Beauty. 👍🤗❤️
Beautiful and easy to make, thank you for sharing 😊❤
So creative! And the music is wonderful….
You can also get a scissor and blade for scoring glass that would make easy work of cutting the plastic cds into the desired specs. Refers to what Robin masters was saying. Just make sure to have a cutting mat and r cardboard as a base surface so you don’t damage your table or desk.
The music is very suspenseful! I'm going to try this!
Great idea! If you intend to make a lot of tiles, it might be a good idea to buy a paper cutter. We can find old ones at flee markets or where they sell second hand office material.
Absolutely beautiful work & your video was very clear & easy to understand.
Clear & consise & not too long- like some others - so I didn't get bored.
Thank you for sharing your beautiful work & creativity.
Much love sister.
Anüshka Veriato.
England 🇬🇧🌈✌️🫶
So awesome. I loved your video . You explained so well . The tiles are beautiful.
That is one of the best CD uses ever
Wow, that chair is really pretty!
This is a great idea, love the colours and I like the ones with the bubbles they add extra interest. Thanks
You should definitely clean the tiles after you've cut them instead of before. The cutting process will cover the plastic in fingerprints and rubbing alcohol actually removes most marker inks, so two birds with one stone
Great! Project ❤️🙏🏿❤️🙌🏾 thank you for sharing.
The tiles are beautiful!
Wow. How fun. Thanks for the DIY show!
Wow, these are pretty labor intensive! I never realised.
What an awesome tutorial! Thank you for sharing.
Love this! they are gorgeous bits of visual yum
Really interesting ideas. Just a warning: do not bake the plastic tiles near pet birds, they have a very sensitive respiratory system and the fumes may kill them.
The Chair is to die for!! Uggh ohmigosh❤❤thank you 🎉
Tin snips are my go to for cutting wire and other difficult objects
I noticed that the foil that was being stripped off with the tape looks pretty. If that was cut into small bits and placed onto the plastic with the paint, it will add a nice sparkle. And glitter maybe?
I was thinking along the same lines.
Yes it looks like abalone
This is such a cool way to recycle old cds. Great video
Well this is an idea I’ve never thought of before. They turned out great. I like your projects. Thank you for your video 🌞🌞🌞
I like the projects - it gives a good idea of what can be done with these little tiles!
BEAUTIFUL IDEA!!!! I'll try for sure! Thanks for sharing your Idea with us 😁
Looks interesting. I may try it one day. Thanks for the video.
Beautiful ! Thank you for sharing.
Very cool idea! Creative. Thank you.
Great to do in winter nights loved the vid as well as the music x
I am so glad I stumbled upon this video. I participated in the whole process up to the baking. Its super fun. It was a bit difficult to completely clean the CD. I had no alcohol in the house. Your tiles turned out really nice and it gives me many creative ideas. Maybe you can also just use two thin sheets of Plexiglas. you can also do everything with paint first and then cut pieces. But hey, lots of room to experiment. Thank you very much and many blessings.
You could use plexiglass, but the cd adds an iridescence to the tiles. 💖🌞🌵😷
Wondering if handsanitizer will work to clean the CDs, esp. with a high alcohol content?
They'd look good on shoes or even inside the heel great idea
this is a fantastic project! soooo inventive. now off to comb garage sales for old cds!!! thank you for a GREAT project presented so clearly and easy to understand. love your voice too btw. 💕
Wow....beautiful work 🥰❤👏