Just bought the 2200kv mamba monster x combo and this video was really helpful,new in this hobby and first time ever using castler creations combo....thanks
Do u haft too bind the tx too the rx before starting the programming of the esc? I have a t4pv tx and a futaba r324sbs reciever. Any advice u can give id appreciate. Ps thanks for the content.
wow man, this just saved me having to get a programming card. my temps are a lot hot now from the added brake force. i'm running the 5700 kv motor, any advice?
Glad it's of use I did this video as I bought the card from my LHS BUT it needed an update to work, the problem I had? I've a mac and the update is only available for a PC! Hence this video as I thought if I'm having to do it this way might as well video it to help someone else out! What car are you running the 5700kv in, also what ESC and gearing? Off for the night in a min but will pick up again tomorrow.
So after going through your steps a couple times I managed to get the brakes to actually work. The problem is you only show the options for a few of the categories. But my ESC has eight different categories and I don't know what the options are in those other categories because castles online programming instructions only have like six categories and they appear to be in a different order than the ones in your instruction book. I'm so lost now I don't know what I'm setting in these different categories cuz I can't figure out what they are 🤬🤬🤬
Do you know how to reset the ESC on a xinlehong 9125 RC 4 WD monster truck using the 2.4GHz transmitter to the receiver on the truck please let me know if you can help me thanks
Ace this is the online castle mamba x page I myself used earlier this week when I had a query it's pdf page dzf8vqv24eqhg.cloudfront.net/userfiles/4671/6540/ckfinder/files/Product%20Manuals/Surface/X_Series_Drivers_Ed_Guide_095-0290-00.pdf
What about if you're having difficulty even getting to that menu. When I do. Rattle and then start the ESC it just starts up regularly it doesn't go into programming
im lost...i followed the instructions....i put my transmitter at full stick(heli application)..wait and wait ..it doesnt make ny tones..i waited 5 minutes and nothing ...only thing it does is arm the motor when i drop it back down to low stick
I tried to calibrate my mamba x 3800kv crawler edition to my traxxas reciever/remote, and i guess i hit something wrong, now when i try to re calibrate it, it just beeps 3 times (. . _ ) and blinks red, yellow, yellow, cant seem to figure it out, my esc and fan also do this weird power off thing when i turn my wheels side to side, need help asap
I would contact castle or your LHS as it's impossible for me to offer advice without seeing it. Can't imagine it's anything major although I appreciate it/s frustraing for you
@@DriftomaniacsRC i got told by someone else that has a mamba x it might he cause im using the stock traxxas radio/reciever and that i should try a different radio at a friends to see if it works, if not ill have to contact castle on monday
@@jaykobenmozzymozzy6085 yup, after its finished its start up, the fan only turns on automatically to cool the esc down if it gets warm (if you have it turned on still, i think its on by default, in settings via pc)
Nate you'd be as fast to check the online manual on the castle site as that's what I'd have to do to tell you the answer. I would say though if you buy the castle b-link connector for it then you can change everything via your mobile phone on the castle app. I'm lost without it now. Best $40 you'll spend on castle product
I still haven’t got my mamba x and censored motor combo to work, every time I plug in the cable the motor won’t move it cogs just sitting there, and when I unplug it, it drives like a regular truck even though it’s a sensor’d motor. Help.
Ray very very hard to help out remotely, best thing I would say is if you can stretch to it get the b-link (About $40) and then you can program this and SO much more via android or apple phone, literally you can change EVERY paramater you can think of and then a lot you or I never even thought about!
Why would my sidewinder SCT ESC have no brakes at all? And I don't mean the brakes aren't working I mean they just don't exist. When I hit reverse it immediately goes into reverse. It's gonna explode my damn transmission 🤬
Get Your Very Own Castle Mamba X Right here - bit.ly/3f0lt6G
This is the BEST video for the castle esc!
Just bought the 2200kv mamba monster x combo and this video was really helpful,new in this hobby and first time ever using castler creations combo....thanks
YOU ARE A GOD! Thank you so much and it made my slash with esc sidewinder combo with castle 3800kv run so smooth now.
I think this was the best one I seen so far...this was very helpful
Thank you this video really helped me out !
Brilliant! :) thinking of getting this esc
New Subscriber here. Thank you for your intuitive video.
You are awesome! Thanks a lot! Keep up the good work! Have fun Rc-ing
Good video. Helped me out.
Glad to hear it!
Very helpfull thank you
Good vid. Are you from australia?
Do u haft too bind the tx too the rx before starting the programming of the esc? I have a t4pv tx and a futaba r324sbs reciever. Any advice u can give id appreciate. Ps thanks for the content.
Thanks sir this helped me👌🏽
Nice! Will this work with the MambaX 8s?
wow man, this just saved me having to get a programming card. my temps are a lot hot now from the added brake force. i'm running the 5700 kv motor, any advice?
Glad it's of use I did this video as I bought the card from my LHS BUT it needed an update to work, the problem I had? I've a mac and the update is only available for a PC! Hence this video as I thought if I'm having to do it this way might as well video it to help someone else out! What car are you running the 5700kv in, also what ESC and gearing? Off for the night in a min but will pick up again tomorrow.
@@DriftomaniacsRC i'm running the 5700kv in a lcg slash 2wd and the same (mamba x) esc . the gearing ratio is 54t spur :17t pinion, thanks!!
Yes don't brake as much.
Great video very helpful !!!!
Muito obrigado! Este vídeo é realmente muito útil! PARABÉNS PELO BOM CONTEÚDO! 👏👏👏👏
I need help with mine. I have a mama x, the same one you have. I'm trying to set up my punch
So after going through your steps a couple times I managed to get the brakes to actually work. The problem is you only show the options for a few of the categories. But my ESC has eight different categories and I don't know what the options are in those other categories because castles online programming instructions only have like six categories and they appear to be in a different order than the ones in your instruction book. I'm so lost now I don't know what I'm setting in these different categories cuz I can't figure out what they are 🤬🤬🤬
Nice thnx am shore it will help
Does this work with any radio ive got a flysky noble nb4 ive my castle motor and esc has come but my laptop has packed in
Nice!
When you’re finished programming do you just turn tge esc off to save settings or is there another step to save?
Shaun just turn it off and that should save it if all's gone well.
Do you know how to reset the ESC on a xinlehong 9125 RC 4 WD monster truck using the 2.4GHz transmitter to the receiver on the truck please let me know if you can help me thanks
Thank you
What does it mean when the eac beeps three times at idle
How Many settings are on this? You basically stop at 5, is there only 6 settings to go through with the MMX8S 1717 1650kv?
My x series esc has 6 settings. I have no paperwork would you know what it's for and the option values. Thanks so much.
Ace this is the online castle mamba x page I myself used earlier this week when I had a query it's pdf page dzf8vqv24eqhg.cloudfront.net/userfiles/4671/6540/ckfinder/files/Product%20Manuals/Surface/X_Series_Drivers_Ed_Guide_095-0290-00.pdf
Thanks so much
@Phoenix RC Crawler old video but didn't know if you knew this cause I didn't.
Sounds confusing but after a few attempts it'll work out just fine.
I got forward and steering programmed but I can't get the reverse programmed
Thank you for this my pc isn't talking to my mmx8s
Can a REDCAT RCR-2C 2.4Hz / Be programed to that MAMBA?
What about if you're having difficulty even getting to that menu. When I do. Rattle and then start the ESC it just starts up regularly it doesn't go into programming
I would contact horizon but the 90min wait..,,
im lost...i followed the instructions....i put my transmitter at full stick(heli application)..wait and wait ..it doesnt make ny tones..i waited 5 minutes and nothing ...only thing it does is arm the motor when i drop it back down to low stick
I tried to calibrate my mamba x 3800kv crawler edition to my traxxas reciever/remote, and i guess i hit something wrong, now when i try to re calibrate it, it just beeps 3 times (. . _ ) and blinks red, yellow, yellow, cant seem to figure it out, my esc and fan also do this weird power off thing when i turn my wheels side to side, need help asap
I would contact castle or your LHS as it's impossible for me to offer advice without seeing it. Can't imagine it's anything major although I appreciate it/s frustraing for you
@@DriftomaniacsRC i got told by someone else that has a mamba x it might he cause im using the stock traxxas radio/reciever and that i should try a different radio at a friends to see if it works, if not ill have to contact castle on monday
Is the esc fan supposed to turn off once you arm your contorler to the esc after programing your esc
@@jaykobenmozzymozzy6085 yup, after its finished its start up, the fan only turns on automatically to cool the esc down if it gets warm (if you have it turned on still, i think its on by default, in settings via pc)
@@JayDawgDrummer thanks man makes sense now haha
Salute I'm subcribe 2 ur channel I wondering if u can help me does this still work 2 program esc mamba X , an 1415 2400kv castle motor setup ?
How do you switch to nimh mode can you make a video of it
Nate you'd be as fast to check the online manual on the castle site as that's what I'd have to do to tell you the answer. I would say though if you buy the castle b-link connector for it then you can change everything via your mobile phone on the castle app. I'm lost without it now. Best $40 you'll spend on castle product
Here's another one if you use a nimh battery on the castle esc while on lipo cut off what will happen
I still haven’t got my mamba x and censored motor combo to work, every time I plug in the cable the motor won’t move it cogs just sitting there, and when I unplug it, it drives like a regular truck even though it’s a sensor’d motor. Help.
I would contact castle directly with their helpdesk you're through to them in less than 30 secs
So I need help,I tried doing exactly what you are doing, but I can't get passed the red lights,what gives? Please help
Ray very very hard to help out remotely, best thing I would say is if you can stretch to it get the b-link (About $40) and then you can program this and SO much more via android or apple phone, literally you can change EVERY paramater you can think of and then a lot you or I never even thought about!
I want to stop my crawler from front flipping when I let off throttle how do I do this
Adjust the drag brake it’s set too high
I tried programming but when i try to say no to a setting i press reverse but it wont do nothing ,,, any help
Joshua call castle their customer service is world class and free!
Why would my sidewinder SCT ESC have no brakes at all? And I don't mean the brakes aren't working I mean they just don't exist. When I hit reverse it immediately goes into reverse. It's gonna explode my damn transmission 🤬
Damn. Not working for me. Wonder why
Yeah we were with you until you left us on the last step for those of us who don't have a manual
all the manuals can be found online!
🤖👍💯
You never finished...