Where did you connect the one for the radiator pump? The fans are connected to the "CPU Fan", correct? So the radiator pump will be connected to the "Pump Fan"?
Hey man I have the MSI Pro Series Z690 a/c DDR5 motherboard. I’m having a hard time hooking up the MSI CoreLiquid 240R v2 to my motherboard. I don’t exactly know which plug goes where.
Hello i have a deepcool ls 720wh and i want to connect the rgb fans from it to deepcool 5v to12 v convertor to my msi z 390 a pro motherboard . Is it possible if i connect the rgb cable coming trough the convertor to "jrgb1" port from my motherboard ?
I have a problem. I connected the cooling, but I have one cable (short) left, the cooling turns but does not light up, I do not understand too much how it should be connected (msi mag coreliquid 280R) can you help me on some disord or private chat?
Hi, Sir thank you so much for your info. and I wish the best for you, regarding the above video I have 2 questions: 1. One of the connections of the convertor cable has four pins, but the other 2 connections have 3 pins, my question is if we connect all fans' power to the convertor cable(while all of them have 4 pins) in what order we should connect them to the cable converter 2. My 2nd question has to do with the RGB daisy chain because all three of them have 2 sorts of connections(=Male and Female) in your video is not clear to me again in which order we should start the daisy chain and the end male and female of the RGB daisy chain are going to be connected to which connections on the MSI motherboard; most MSI motherboards have 2 connections(jumpers): (a)JRAINBOW and (b)JRGB. I will be very appreciative to guide me as soon as possible.
OMG BRO! You helped me a lot! I haven’t seen such a detailed, and perfect video from anyone as you have! subscribed (if i misspelled it sorry for my bad English)
My setup is built properly. My problem is with mystic light, the program doesn't let me adress my cooler. It won't let me change the colors of my fans and pump.
Hello i don't have ARGB but RGB 12v so if i don't connect cables Will the colors still be displayed or will I just not be able to change them? i have B450 asus tuf ...Thanks
@@USComputerSolutions hi sir. you mention led1. my pump wont work also. but igot addr_led1 is that compatible to use. just like jrainbow sorry for bad english ty
I am not there to diagnose why, but you might have the device with presetting? Have you guys tried to use the software that controls the LEDs or RGBs ? If you have and nothing happened i assume its a connection issue or a defect from manufacture
Just for future reference, the black gloves make it difficult to see the connectors.
So confusing to explain. You don't know how to explain and detail anything
You didn't watch the full video
And you clearly didn't put effort in or use common sense. Every motherboard is different
Thanks for the torial, how do you change che color of the RGB coolers? , the mystic light software wont recognize them
Did you find something to make it work
@@HiteshKumar-fu5fd where can i download the msi aio drivers so i can turn the fan speeds up or down. msi center and msi dragon doesnt show the aio
Good Explanation Dude😊 Its helped Me😊
where can i download the msi aio drivers so i can turn the fan speeds up or down. msi center and msi dragon doesnt show the aio
Can you share how you setup your MSI RGB? you mentioned you could share a link for MSI users?
Where did you connect the one for the radiator pump? The fans are connected to the "CPU Fan", correct? So the radiator pump will be connected to the "Pump Fan"?
Yes, not all motherboards have pump but mine does and yours sound like it does too.
@@USComputerSolutions thank you 😊
If mine doesn't have pump fan can I connected in system fan?
@@johnifax360t4 did you end up connecting it to system fan?
@@jaidonkc yes and now it glows only in orange
great video for someone who has bought an ant esports cabient
Hey man I have the MSI Pro Series Z690 a/c DDR5 motherboard. I’m having a hard time hooking up the MSI CoreLiquid 240R v2 to my motherboard. I don’t exactly know which plug goes where.
As far as I'm aware the connections are the same as any other board
Thanks, great video
Hello i have a deepcool ls 720wh and i want to connect the rgb fans from it to deepcool 5v to12 v convertor to my msi z 390 a pro motherboard . Is it possible if i connect the rgb cable coming trough the convertor to "jrgb1" port from my motherboard ?
Can I use a gigabyte mini mobo with this MSI aio?
Bro my cables do not fit into the Y adapter. The plastic casing surrounding the holes is too small??
My motherboard doesn’t seem to have the jrainbow connection . Aorus elite v2 b550 btw
Msi pro z790p have a spot for this?
My motherboard is MSI b550 gaming gen3, I buy MSI mag coreliquid c240 today. But there is no 3pin jrgb in my motherboard. What I should do?
You found solution?
@@sulx911same guys ny mother board only have 4 pins and my
rgb fans have only 3 pins bruhh it works but with no rgb lights😢
What about the msi mpg b560i gaming edge wifi intel one?
can i install that coreliquid with my b450-f motherboard?
I have a problem. I connected the cooling, but I have one cable (short) left, the cooling turns but does not light up, I do not understand too much how it should be connected
(msi mag coreliquid 280R)
can you help me on some disord or private chat?
Im having the same issue, did u find out what to do?
THANK YOU SO MUCH!!!!!!!!!!!!!!!!!!!!!
Holy.... Thank You, Thank You, Thank You🙌🙌
Such a great Video that i searched a long Time 👍🏼
Without this Video i would get a Mental Breakdown😅👌🏽
Hello bro I have a b450 mortar max and idk if I can connect the rgb ? Please help me
Subscribed!
Hi, Sir thank you so much for your info. and I wish the best for you, regarding the above video I have 2 questions: 1. One of the connections of the convertor cable has four pins, but the other 2 connections have 3 pins, my question is if we connect all fans' power to the convertor cable(while all of them have 4 pins) in what order we should connect them to the cable converter 2. My 2nd question has to do with the RGB daisy chain because all three of them have 2 sorts of connections(=Male and Female) in your video is not clear to me again in which order we should start the daisy chain and the end male and female of the RGB daisy chain are going to be connected to which connections on the MSI motherboard; most MSI motherboards have 2 connections(jumpers): (a)JRAINBOW and (b)JRGB. I will be very appreciative to guide me as soon as possible.
OMG BRO! You helped me a lot! I haven’t seen such a detailed, and perfect video from anyone as you have! subscribed (if i misspelled it sorry for my bad English)
You are welcome 😊 glad to help
Im having trouble getting the fans going the lights work but not the fans
I have a Asus rog strix mb… I don’t have the jrainbow pin
hey man, what if i have Jrgb?
I need help, i have a different motherboard
My setup is built properly. My problem is with mystic light, the program doesn't let me adress my cooler. It won't let me change the colors of my fans and pump.
how do you change led color?
thx
I need help with my 360r msg cooler, I got a mai MPG X570 Edge Wifi, I got sum problems with the cables if u can help me plz comment back
I have the rgb connector 3 pin on my motherboard but no matter what I do it just won’t go in idk what to do
Literally can’t my 3 pin connector in the JRAINBOW1 pins
Hello i don't have ARGB but RGB 12v so if i don't connect cables Will the colors still be displayed or will I just not be able to change them? i have B450 asus tuf ...Thanks
thx man
Hi... What if I don't have the JRAINBOW connection? What I can do? I have an MSI Z390-A PRO
Have you tried the d_led1?
@@USComputerSolutions hi sir. you mention led1. my pump wont work also. but igot addr_led1 is that compatible to use. just like jrainbow sorry for bad english ty
I bought my pc premade and the aio works but the rgb dosnt work can you help me ?
i have the same issue have you fixed this yet?
@@MistaaJjaB not jet bro tell me if you did
@@candytv8365 its weird, one fan lights up but the other and the logo on the pump both dont light up, havent found a fix really annoying me
I am not there to diagnose why, but you might have the device with presetting? Have you guys tried to use the software that controls the LEDs or RGBs ? If you have and nothing happened i assume its a connection issue or a defect from manufacture
@@USComputerSolutions the Software doesnt find the lights but the fans
Is it fine to connect it to JRAINBOW 2
Same question! Someone please reply i’m building my pc rn
I have the c280. And it has different plugs. 🤦♂️🤦♂️🤦♂️🤦♂️. I can’t find out how to do it anywhere.
Now... how to fix that bad cooler?
Pour les français je vais faire une vidéo avec un carte mère qui n'as que 3 prise 4pin fan
Jones Scott Lewis Eric Gonzalez Jose
Bruh, the cable management 😅😅💀
Brown Kimberly Jones Maria Garcia James
my head hurts
Lewis George Walker Christopher Lewis Kenneth
Hernandez Sharon Moore Linda Harris Jason
Clark Gary Jones Helen Jones Nancy
H
Moore Donna Lewis Karen Lopez Donna
This was a hot mess to even understand.
This video needs to be done without the fan put inside the case. As a beginner I need to be shown what goes to what specifically…
Taylor Joseph Hernandez David Jackson Larry