Mount Your Rotopax Water On Your Roll Cage!
HTML-код
- Опубликовано: 28 авг 2024
- Check out this convenient way to mount your Rotopax water in the cargo hold of your Jeep JKU!
The parts:
Rotopax can: rotopax.com/2-... mount: rotopax.com/dl...
Garvin Wilderness A-pillar mount: garvinracks.co...
(This video is not sponsored by Rotopax or Garvin Wilderness Adventures.)
==========================
Don't forget to subscribe to this channel and support us on Patreon @ www.patreon.com/baptismoverland
Also follow and like us on IG @baptismoverland Авто/Мото
That's cool and clean, a could years ago I did a DIY with the roto pax mount and same 3 inch bolts and a 1900 electrical box cover, I didn't even know they had anything like that. Love your builds and hope to see more
No love for 2 door JK from many companies....we need the clever storage more!
Totally agree!
I completely agree as well!
I like the idea of having the rotopax inside the car then outside.
Exactly! Cuz on the outside the heat will make it hot or the cold might freeze it.
Just please don’t store the one with fuel inside lol
Nicely done
Nice but I'd be worried about a leak with the spout on the bottom like that.
Haven't had any. I've tested it A LOT. Lol. And before I mount it up I always turn it upside down over the sink to make sure it's good. You just gotta make sure it's sealed tightly and that you replace any washers that might get worn after awhile
Have the Rotopax bracket welded to the Garvin!
Great idea! I actually don't have this setup anymore since I switched roof racks to front runner. It has a bracket that goes inside the vehicle and attaches to the roll cage so I couldn't use the Garvin bracket. But I used some the parts and attached it to that front runner bracket. So the rotopax is still there in the same spot but now it's mounted to the roof rack bracket
I know this is a older thread but has the bracket problem been solved by Garvin Jesus bless ya from a brother from downunder 🇳🇿🤠💒
Not that I know of. I haven't kept up with that company
Can't you flip the Rotopax upside down and point the cap back to the rear of your Jeep to get the angle you wanted for a spout mod? +1 on the Rhino Rack comment.
Yeah I can. And that’s what I’ll prob do. Just wish it was vertical but this works
Anyone have a spout that doesn’t leak for the Rotopax?
Yes! The best thing I've ever done for the rotopax is upgrade to the GoWesty spout. You do have to maneuver it and make sure it's tight to prevent leaks but it has allowed me to turnt he rotopax upside down and now I have water with the twist of a knob. I WILL say though that after having it for 3 years now, one of the o-rings has broken and I need it replaced (you just reminded me I need to contact them lol)
@@BaptismOverland thank you for the response! I was quite hesitant on the GoWesty after reading some of the comments/reviews on it. Encouraged your experience has been good for 3 years!
@@CraigG21 Well it's great but as I mentioned, you REALLY have to finagle that thing to make sure it's tight. I've had some leaks until you really get it to where it's tight or that the spout isn't crooked. When it works, it works awesome lol. I've gotten used to how to really put it on there. BUT if you find something even better, LET ME KNOW! I'm always willing to try other solutions.
@@BaptismOverland I may go with a pump system that would work better for my hitch carrier mounted Rotopax better. The container would be mounted upright, minimizing the chance of any spills, and I would just install the pump/outlet once at camp. Looking at the system by LoneRockConcepts, which is a bit more expensive that the GoWesty.
@@CraigG21 Looking it up now! Lol. I have to see if I can do a pump system as my rotopax doesn't have much room at the top (as you saw in this video). It's actually even higher now because I took off this mount after I got the Front Runner roof rack and I mounted the rotopax mount directly to my Front Runner brackets that holds the rack in place from the inside.
Does the water container when you use them for drinking water does the water taste like plastic?
Not anymore than drinking from plastic bottles lol
Thanks so much for the video man! Question for you, would this work with a soft top? (JKU) I don't mind putting the Rotopax container after the roof is down or up... Meaning removing the rotobax when folding the top. Would the bracket for this setup interfere with the soft top? 🤔
Tks so much
Yes it should! In fact in their product page, the photos of it IS on a soft top! I've loved it so far man.
Thinking of getting the 2 gallon rotopax but live in the city now. So no vandalism is committed, do you have any locking solutions for the sprout?
Hmmm not that I know of.
Hey bud, if you go with the Rhino you won't have to change anything as it is along the hardtop and is only mounted on the top of the roll bar from what I remember. As a curious question when the water jug is mounted how far into the back does it come in. Reason why I'm asking is that I have a system for the back of my Jeep and the fridge is on that side. Thanks
The mount for Garvin is actually very close to the top. It’ll def run into it
What are the measurements on the mount? Thinking it might work with the roll bar I have in the bed of my JT.🤔
I don’t know but it’s adjustable so it should fit. I gave the mount away because I now have a roof rack that uses the roll cage. I then fabricated this mount to fit that new roof rack mount
Garvin has closed "AFTER 47 YEARS OF BUSINESS, GARVIN INDUSTRIES IS CLOSING OUR DOORS.
Our family has been involved in making off road related accessories for the past 47 years and we all feel now is the time for us to move on to something new. This has been a difficult decision for all of us and we will miss working with you. We appreciate all the relationships we have built over the years and wish everyone the best in the future.
The last day we will be accepting orders (in stock items) will be April 20th, 2024. Our final shipping day will be May 1, 2024. All sales will be final and we will not be accepting returns."
Oh no I'm so sorry to hear that! I had your original roof rack and wish we could have collaborated on some projects together. Good luck with whatever future endeavors you guys get into!
@@BaptismOverland I do not work for them just updating your thread here so people know when looking for the Garvin products
@@JoeAnderson86 Oh gotcha. Either way that's sad.
Will this work for a JL
You'll have to see if they have the JL version but if I'm not mistaken they do
That’s the wrong mount. They sell a different mount that only has 2 bolts. You probably know that by now tho.
I do lol. Found out after the video but it's all good. I actually made a new mount to work with the roof rack mount that goes on the roll cage so I modified this a bit to make it work
great video check out gowesty spout kit make for rotopax water containers
Bought it awhile back and LOVE IT.
wow does like every guy ask for an extra inch?
Badamtsss....
Ok so will not buy.Seems like junk if it doesn’t fit.
Huh? It fits. Actually I ended up taking the mounts off because my new roof rack uses the roll cage. So I used parts from it to mount it to the bracket of the roof rack inside the vehicle. It's pretty awesome now as water is at the ready
Just use duct tape
😂
The whole world can be fixed with love and duct tape
👎