That’s great to hear RL. The purpose of the raiser is for bigger lens vs the camera body. So if your lens is wider than the camera body, You’ll need it. This is to prevent the lens from rubbing on the quick release (hope that makes sense lol) but instead of adding the provided raiser I use the Manfrotto 323 RC2 quick release which makes moving the camera on and off super quick and serves the same purpose. Another good tip...When I tried to balance a camera with a heavier longer lens without the lens holder the gimbal would micro vibrate and once I added it back it stoped. Hope this was helpful. Please feel free to ask any additional questions if needed. Congrats on the new gimbal.
that gimble is so cool I swear you always have me tempted to get new stuff however it does seem pretty complicated but you made it seem a little simpler
ahahah! yeah it can be a little complicated. In this video was the first time of me doing it and the style is different from my older one But once you balance and setup once the next time is a breezeeee lol Ill share some footage next video I have a Video shoot that I will need this for next week. (:
Yo William this video is really great you helped me a lot for my next project ! Hope everything is fine in your place due to this corona virus stay safe !
That’s awesome to hear Duane. Yes we’re making it! I hope your project goes well and you’re staying safe out there as well. Thanks for dropping a comment 👊🏽👊🏽
Charge the batteries up fully first. Also, before tour first time using it for a shoot. Practice balancing it so you can have it setup beforehand. Practice using it and the modes as well so you have the know how to operate as well.
Thanks a lot. I’m happy you found this video helpful. When I made this I noticed is wasn’t a lot of detail info if you never had a gimbal and it can be very confusing at first. I was a bit confused then I finally figured it out ahaha good luck with you new gimbal bro 😎
They had some battery life but I’d recommend to completely charge up first. Should take about 3 hours to get to max. And thank you. I’m happy this video was helpful 🙌🏾🙌🏾
Thanks great to hear. I’m happy I was able to help you figure some things out with your new gimbal. I hope you make some cool stuff with it and your dslr ❤️
That's Awesome! I love Zhiyun tech gimbals I think they're the best on the market for sure. They have about 8 different models of gimbals so I trust they know what they're doing lol Thanks sis!!!!
Thanks Daymean!!! Thats whatsup, please feel free to hit me up either on youtube comment section but may be easier to DM me on IG @WillsLyrics can't wait to check it out homie!!
4 года назад
Great video Will, very helpful for people looking at buying a gimbal for your full size camera. Plenty of info and good price. Many thanks for sharing the info - stay safe :)
Yes, hopefully this video can help someone out there a bit confused on the process. Love this little piece of tech and the price isn't bad at all. Thanks for watching Shaun.
That’s great to hear 👊🏽 I’m happy you found this helpful. It is a learning curve if it’s your first time using a gimbal so practice practice practice…before you decide fo actually use it. Balancing can be a challenge at first but eventually you can get to less than 2-3 mins so your shoot isn’t held up. Overall a great gimbal tho. Hope you enjoy it as much as I have 😏🙌🏾👍🏽
No problem 👍 I am happy this was helpful. When I was making this I noticed no one really gave details on how to balance so yeah!! Hope you get some good use out of your gimbal!
I was planning to buy this gimbal, but the only problem i am facing is how do i travel with it since it doesn’t come with a carry case like dji ronin sc. Is there a way to get a carry case for this gimbal or a cheap hack to carry it around
Since the gimbal is small and brakes down good I just stuff it in my 21 liter wandr provk camera bag. I’ve also will attach it to the outside in the water bottle holder. I had the crane plus which came with a carrying case which was good but I never used much. There are aftermarket options as well like this one rated well amzn.to/3SEWdaO So I think you’ll be okay. If you go that route. Still a great gimbal in my opinion
@@adityajha9797 holy smokes!!! That’s crazy. Maybe search your Amazon store and check reviews to see what works. It’s a great travel gimbal for sure and really no need for a case if you have a camera bag.
hey William bought a few weeks ago and my gimbal start vibrating not sure what to do and i cant find any solution to deal with it. I am on latest firmware. please HELP
It’s probably the way you are balancing at first balancing is hard to do. I notice mine vibrates if I don’t balance all axis correctly so check that. Also, check the weight and make sure it’s centered
@@WilliamNevius i have balanced the camera and lens perfectly as much as i can it still vibrates and more to add it vibrates when turned on without camera on it.
Lol gotta keep giving it a go bro. Maybe try the other axis first to see if that helps. It’s tough when you’re first trying to figure out the balancing part but when you get it you’ll be good. I hope you found something in this video that helps.
@@WilliamNevius lol I finally got it like 20 minutes after commenting .. I didn’t realize you were pulling the second axis up and down 😂 I thought you were only moving the lil dial lock thingy
@@WilliamNevius so quick update, I’m slow 😆 I should have just waited for my husband from the jump he got them on and then I found a more in-depth video and I was like ohhhhh 🤦🏾♀️ I love camera but I swear I don’t know enough about them. Great video I watched a few times.
@@chalee62 that’s great to hear it all worked out. When you mentioned it wasn’t the right screw I was like it gotta fit lol meant to write back yesterday how you had to insert the screw in I’m a specific spot by the arrow. Hubby’s come thru tho 💪🏽 I hope you enjoy your setup and make some fly videos. Just keep watching filmmaking tutorials on RUclips I swear that’s how I learned how to use cameras lol And thank you!! 👊🏽👊🏽
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
Hi William, just bought the Weebill S yesterday. Enjoyed your video. Thank you. What is the purpose of the riser. Do you use it?
That’s great to hear RL. The purpose of the raiser is for bigger lens vs the camera body. So if your lens is wider than the camera body, You’ll need it. This is to prevent the lens from rubbing on the quick release (hope that makes sense lol) but instead of adding the provided raiser I use the Manfrotto 323 RC2 quick release which makes moving the camera on and off super quick and serves the same purpose.
Another good tip...When I tried to balance a camera with a heavier longer lens without the lens holder the gimbal would micro vibrate and once I added it back it stoped.
Hope this was helpful. Please feel free to ask any additional questions if needed. Congrats on the new gimbal.
@@WilliamNevius thanks again and Have a nice holiday season.
Bruh, this is easily the best instructional video for the webill s!
Im glad this video was helpful for you Rick. Much appreciated.
William, you killed it in this video! You covered everything and it was super detailed. See you in your next video!
Yes its a gift and a curse! want the video to not be too long but want to break things down as simple as possible. Thanks a lot bro!! Will do!!
You did a great job on this video king!
Thanks a lot. Appreciate that Christopher 💯💯🙌🏾
that gimble is so cool I swear you always have me tempted to get new stuff however it does seem pretty complicated but you made it seem a little simpler
ahahah! yeah it can be a little complicated. In this video was the first time of me doing it and the style is different from my older one But once you balance and setup once the next time is a breezeeee lol Ill share some footage next video I have a Video shoot that I will need this for next week. (:
Great demo sir. Great vibe in that room too . Thank you.
Thanks a lot bro it’s a while vibe 🙌🏾🙌🏾
Nice tutorial and nice room setup, I'm feeling those colors!
Thanks a lot 🙌🏾🙌🏾
Yo William this video is really great you helped me a lot for my next project ! Hope everything is fine in your place due to this corona virus stay safe !
That’s awesome to hear Duane. Yes we’re making it! I hope your project goes well and you’re staying safe out there as well. Thanks for dropping a comment 👊🏽👊🏽
@@WilliamNevius Lastly, when you open it for the first time after buying it do we need to charge the batteries or does it have factory charge ?
Charge the batteries up fully first. Also, before tour first time using it for a shoot. Practice balancing it so you can have it setup beforehand. Practice using it and the modes as well so you have the know how to operate as well.
@@WilliamNevius Great! thanks a lot William!
great video man! ill be ordering mine friday and im already preping for this things. loved the info you gave and how hands on you were.
Thanks a lot. I’m happy you found this video helpful. When I made this I noticed is wasn’t a lot of detail info if you never had a gimbal and it can be very confusing at first. I was a bit confused then I finally figured it out ahaha good luck with you new gimbal bro 😎
Thank you so much for posting this! So helpful! Do the batteries come precharged or did you have to charge them first?
They had some battery life but I’d recommend to completely charge up first. Should take about 3 hours to get to max. And thank you. I’m happy this video was helpful 🙌🏾🙌🏾
Very helpful video! First time using a dslr gimbal and I need all the help! This video was verrryyy helpful.
Thanks great to hear. I’m happy I was able to help you figure some things out with your new gimbal. I hope you make some cool stuff with it and your dslr ❤️
I recently bought the Zhiyun Crane 2 and I'm loving it! Great video, very informative!
That's Awesome! I love Zhiyun tech gimbals I think they're the best on the market for sure. They have about 8 different models of gimbals so I trust they know what they're doing lol Thanks sis!!!!
Amazing quality content I hope you get noticed and get big👍🤟
Thanks a lot homie!!! 👊🏽👊🏽
My man, clean video I should be getting my setup going soon so I may consult
Thanks Daymean!!! Thats whatsup, please feel free to hit me up either on youtube comment section but may be easier to DM me on IG @WillsLyrics can't wait to check it out homie!!
Great video Will, very helpful for people looking at buying a gimbal for your full size camera. Plenty of info and good price. Many thanks for sharing the info - stay safe :)
Yes, hopefully this video can help someone out there a bit confused on the process. Love this little piece of tech and the price isn't bad at all. Thanks for watching Shaun.
Just ordered a Weebill S for my A6400. This was an awesome breakdown of what I should expect when I actually get my hands on it lol
That’s great to hear 👊🏽 I’m happy you found this helpful. It is a learning curve if it’s your first time using a gimbal so practice practice practice…before you decide fo actually use it. Balancing can be a challenge at first but eventually you can get to less than 2-3 mins so your shoot isn’t held up. Overall a great gimbal tho. Hope you enjoy it as much as I have 😏🙌🏾👍🏽
Just subscribed when I heard the word punta cana that’s my Beautiful DR
Ahaha thanks. We had a great time in DR sucks my gimbal broke while there but I was being reckless so it was destined to happen.
Thanks for the great video. I have a question 🤔. With which camera does this (Weebill S) work without any problems?
The gimbal can work with any camera and lens setup under 8 pounds. In my opinion it works best with smaller mirror less camera setups.
Thank you so much for the video, I liked it. Thank you. God bless you. 👍🏻👌🏻
Thanks so much for taking the time to drop a comment Jaylli and the thumbs up! I’m happy you found this video helpful 🙌🏾💪🏽
thank youuuu mann everybody elsse keep skipping steps appreciate u bro.
No problem 👍 I am happy this was helpful. When I was making this I noticed no one really gave details on how to balance so yeah!! Hope you get some good use out of your gimbal!
Excellent video very detailed thank you for sharing stay safe out there. Sincerely, Adventures of David and Aaron
Yes bit of a longer one. I really enjoying teaching low key lol Thanks so much for watching guys! !!
thank you BEST THING U SAID WAS IT'S LIKE A 9-5 TO LEARN
😂😂🤣 if you’re not getting it right. keep practicing it’s a learning process
Good full tutorial!!!
Thanks a lot. I’m happy you found this video helpful 🙌🏾🙌🏾💯
if you use the micro usb to micro usb and set the camera to panasonic you can actually adjust your camera settings like ISO and such
Yes that is correct! Most cameras are supported. Will have to check the list. It will also can charge your cameras battery while in use as well
Love this review!
Thanks a lot. Happy you found this helpful
so helpful, thanks!
No problem. I’m happy I was able to help you out. Crazy this video is 3 years old but still providing good info for people. I love that 😊
It helped me❤
That’s great to hear. Thanks for sharing that. I’m happy I was able to help you out. happy creating bro.🙌🏽🙌🏽
I was planning to buy this gimbal, but the only problem i am facing is how do i travel with it since it doesn’t come with a carry case like dji ronin sc. Is there a way to get a carry case for this gimbal or a cheap hack to carry it around
Since the gimbal is small and brakes down good I just stuff it in my 21 liter wandr provk camera bag. I’ve also will attach it to the outside in the water bottle holder. I had the crane plus which came with a carrying case which was good but I never used much.
There are aftermarket options as well like this one rated well amzn.to/3SEWdaO
So I think you’ll be okay. If you go that route. Still a great gimbal in my opinion
The aftermarket bag which you have sent it great and will solve my purpose the only issue is the bag in US is 35$ but in India it’s 100$ lol
@@adityajha9797 holy smokes!!! That’s crazy. Maybe search your Amazon store and check reviews to see what works. It’s a great travel gimbal for sure and really no need for a case if you have a camera bag.
Cool, thank you so much!
Do check out my portfolio
www.adityjha.co.in
appreciate you bruh
Yo what’s good. And you’re very welcome. I’m happy you found this video helpful (:
hey William bought a few weeks ago and my gimbal start vibrating not sure what to do and i cant find any solution to deal with it. I am on latest firmware. please HELP
It’s probably the way you are balancing at first balancing is hard to do.
I notice mine vibrates if I don’t balance all axis correctly so check that. Also, check the weight and make sure it’s centered
@@WilliamNevius i have balanced the camera and lens perfectly as much as i can it still vibrates and more to add it vibrates when turned on without camera on it.
Good video
Thanks a lot 💯💪🏽
Been sitting here for an hour and still haven’t been able to get the first axis balanced 🙃 I’m regretting everything now
Lol gotta keep giving it a go bro. Maybe try the other axis first to see if that helps. It’s tough when you’re first trying to figure out the balancing part but when you get it you’ll be good. I hope you found something in this video that helps.
@@WilliamNevius lol I finally got it like 20 minutes after commenting .. I didn’t realize you were pulling the second axis up and down 😂 I thought you were only moving the lil dial lock thingy
I bought insurance for it at Best Buy once I watched your video bro 😎
😂🤣😅😅 good move. The way it’s made out of plastic insurance is definitely the way to go!
💕💘💕💘💕. I see you!!! 🤗😘
🤗😘😍😍Now I just have to show you how to do this so you can film me (: 😚
My screws did not fit when mine arrive today. Super frustrated
The ones that connect the camera to the plate? What kind of camera do you have. Those screws are standard for camera so should fit
@@WilliamNevius I have a canon m50 and the screws are to big to fit in between the line of the plate and the smaller one as well
@@WilliamNevius so I cannot screw it into my camera I don’t know how that even happened
@@WilliamNevius so quick update, I’m slow 😆 I should have just waited for my husband from the jump he got them on and then I found a more in-depth video and I was like ohhhhh 🤦🏾♀️ I love camera but I swear I don’t know enough about them. Great video I watched a few times.
@@chalee62 that’s great to hear it all worked out. When you mentioned it wasn’t the right screw I was like it gotta fit lol meant to write back yesterday how you had to insert the screw in I’m a specific spot by the arrow. Hubby’s come thru tho 💪🏽
I hope you enjoy your setup and make some fly videos. Just keep watching filmmaking tutorials on RUclips I swear that’s how I learned how to use cameras lol And thank you!! 👊🏽👊🏽
It's actually pronounced "ju-WING". Don't ask.
😂🤣🤣 Yea most people can’t pronounce it me included. they should’ve name them something simpler 😩😄🤣 but hey we all know the nickname lol