I love how in some videos Linus says "Ridge wallet is trying to redefine the traditional wallet" and in others he says "Ridge wallet HAS redefined the traditional wallet" . The duality of man
If you watch the WAN Show before some weeks, he acknowledged this fact that "they have done it ladies and gentlemen" since the script was indeed changed by Ridge themselves.
Ridgewallet is great if you don't use Cash or so. As soon as you livin' in a Country which doesn't has one Buck Bills but gives you coins for it - It's questionable.
To be fair that desk as a whole was nothing to write home about, they didn't even show any Glamour Shots of the finished thing. Seems like it got rushed out for content, or just to get it off their filming list.
This comment made me keep watching. I hate the custom waterblock but if you put a mat over it I think I'd like this thing. I'm tempted to see if I can DIY something like this to hide my PC
@@superkillrobot Yeah look at revised title they change after upload to be more relevant after algorithm wants the clickbait title. There will be a final part where they finish out the project, if anything this wasn't to get it off their list but keep the project active on the channel.
"The goal was to give up absolutely nothing in terms of performance." Wasted opportunity to say: "The goal was to leave absolutely no performance on the table."
@@pcmasterracetechgod5660 In all fairness, most workloads cannot appreciate the raw pwer of current gen top end hardware hardware. The software hasn't caught up
Honestly, it feels like they threw in the towel on this build because of how severely outclassed they were on this build. DIYPerks PC builds have out done everything LTT has built in the past year, and honestly a lot of other channels as well, and they do it without reusing the same dusty old parts in each video.
@@Yurch890 Professionals at manufacturing? They have some of the most expensive tools on the market and they don't even use them. I'm guessing they were planning to do something similar to Hacksmith but they got bored and gave up.
Could've just made a nice dock for a laptop with a 3080 mobile neatly integrated into the table with maybe ducts for the rear and bottom vents so that it isn't as loud or something like that
3 года назад+111
You should really do a setup with DIY Perks guy. His attention to detail and your access to crazy parts would be a nice combo.
DIY Perks doesn't need Linus half-assing his builds lol. Maybe they can hire Matt to properly finish their builds when Linus has to go film WAN Show lol.
7:07 Make sure you use a brad nailer in a perpendicular orientation to your rails. This will help compensate for a potential blowout. The head of the nail is more likely to deflect perpendicular from the orientation of the magazine (left/right when holding the nailer upright.) But when using MDF, this isn't a huge concern.
@linus To find air leaks, use a 4ft hose with one end up to your ear and the other about a quarter inch over the search for a leak area. The air leak echoes and amplifies up the hose when you are near the source.
Things I'd do differently if I was going to try this: 1) Soft front edge for the desktop. 2) Under-desk cutout for the user's legs (machine would be built into the rest of it, and thickness wouldn't matter that much). 3) Monitor(s) attached to a monitor arm rather than resting on the desktop, which enables the last feature - 4) The desktop is hinged and can tilt up for easy access to the internal components (kind of like a car hood).
I get the reason for the lights due to ballast/controller buzz - but that's on level with turning the radio down when you're trying to find a location.
Or just a stock limitation, given how overkill a 3070 already is for the work Linus does? They probably needed all the 3080s and such for projects that actually needed that kind of performance
Right? The level of effort Matt puts into actually completing a build is amazing. Could you imagine him leaving a build 80% done and saying "Right, well now I have to film something else, hope you enjoyed this video."
Autistic caveman: "The 'case' is garbage because the airflow is not adequate enough which causes a 2 degree difference thus making the whole thing useless" Also Autistic caveman: "Now if you excuse me, I'm going to go pester NZXT and Dell about crap no one cares about but us. You can watch our 24 minute long upload about it, it will be the one with the pretend mad eyes thumbnail."
Add the cost of labour it took to build that thing, and it might just be the most expensive piece of furniture they have in the office - just for hiis writers knees
Just a note for the analytic side of LMG. Thumbnail barely saved this video for me. I have been waiting for desk PC update and almost missed it because title is too vague and thumbnail kinda hard to distinguish. Didn't really sell this highly desired content
I mean it wasn't even a great conclusion. They once again rushed through a fun project so that Linus can go film something else. It doesn't seem like a video they were very proud of, and rightfully so.
@@superkillrobot I agree, there's nothing fundamentally new about another desk PC. So why multiple episodes were dedicated I have no idea, it's pretty boring.
5:52 PRO TIP @ LINUS: If you have a leak that you can't see or hear, get some soapy water, and rub some of it over areas that are suspected areas for the leak. If air comes out of a particular area with the soapy solution over it, it will create bubbles, showing you where the leak is. Learned this from fixing car tires XD
Also the DIY perks project is also a guide for you to build a similar one if you want to. LTT videos have transitioned to mostly just “watch us do cool shit” kind of videos not many “tips” to be found here
Apply a small amount of water and soap to the tube joints while applying air pressure and looking for bubbles, which actually is quite significant. The quickest approach to actually locate leaks and literally avoid a proble, or so they kind of thought.
In fluid dynamics class, i was taught it is much better to suck than push air. Pushing air goes a very very short distance, whereas one can suck a very long distance.
@@xXDarthBagginsXx you know what, I stupidly hadn’t considered that. Makes complete sense now. I wonder if the 3070 Ti is the same profile or is that already 3080 size? Either way, fair point well made.
@@HamerReviews Same reason you wouldn't put in a 3090, he wouldn't use this for gaming barely any of the time, and that a 3080 would dump more heat into the system when they weren't sure how good the cooling performance would be.
Looks crap but at least they covered with that pad, but that pad also looks like crap, so i hope they can work remotely so they don't have to look at it
Basic rule of acoustics: reduce turbulences, increase laminar flow. Never push the air, always pull it. This reduces the turbulences and thus the noise. Also, a laminar air flow cools better. Therefore always mount the ventilators at the end, at the exit, after the coolers. You have to do the opposite of your mount for optimal performance.
@@Gaetano.94 Sure, if you decide to look at it that way. But still, it would be like hiring 2 full time prostitutes and being their pimp; not the average hiring xD
I always completely draw a blank when I look at videos like this but what I do know if I had money and wanted powerful performance, I myself would leave to the pros. I don't have the time, patience, knowledge, or the nerves to ever attempt doing stuff like this. So I can respect people who can put complicated products together.
@@coolcat23 100% agree. One man's trash is another man's treasure. Desk should've been donated to a local fan for pick up with a signature if they wanted one. Dude needs to eat some humble pie!
I'm surprised he didn't just sell the desk, they would probably make more money than what they put into it from the fans. But it is the proper sent off
the desk part looked like garbage and so does the new one. From the top it looks great and the PC build inside is awesome but LTT is not a furniture maker
i have 3 dreams i want to achieve, #1 is getting a rig that isnt just a large paper weight, #2 is helping one of my friends get a rig (which would come after i sort my rig out), and #3 isnt related to gaming or PC, watching this insane build is amazing!
i think linus means like no compromises for that hardware, like usually a thin desk pc has to have a crazy low profile water cooler that might even be specially made, or a power supply that was modded to be thinner.
what r u running on bro like sure threadrippers and 3070 is good but 100000 lets say laptop 2060 maxq (s) can match up (lol taking a joke literally is cringe ik)
@@qbzerodp I think even to make auction becouse just because it is LTT creation many people would bit even unreasonable price and LTT could donate earnings to charity
While Linus is going Office Space on his old desk (or maybe "going Tom Green" since he's Canadian), there's a crowd gathering to watch. Linus shoots the scene, then goes into Canadian apology mode, but a neighbor cuts him off with a hand wave, and a nod toward the hammer. "Ya finished?" Linus (apprehensive): Y-yeah, I guess. Neighbor: "Cool." (Picks up hammer, commences smashing.)
This should work, the air will heat up when compressed, though the difference may be minimal by the time it's caught on camera. For maximum style points, however, Schlieren imaging should be used instead.
@@Llohr ngl this is the first time I heard of this very interesting concept, but doesn't seem quite practical to have your $3k components hanging in front of a mirror to find a air leak. They were already freaking out moving it between tables.
It’s awful. I bought one. It’s super uncomfortable, and it scratched the shit outta my cards and honestly is super inconvenient. It’s the equivalent of just having 2 rubber bands around your cards. It’s bad
I havent had an issue with it and have used for over a year and a half. I didnt pay for it but if something happened to this one i would buy one myself. Havent had a card scratching issue but it isnt all to smooth to slide in the cards the girst few days. Once broken into its very comfortable and the size even with the clip or strap is just great. I hold 10 cards but i believe it can hold 15 at which point it might end up feeling awkward
You can clearly see them running at 12:07, 12:16 and 13:13, you guys must be thinking that the focused flow stator guide vanes are the fan blades, they're not.
@@FastSloth87 I look, but it's either just such a short amount of time, they're so fast, or the black on black - it doesn't even look like there are blades are there.
I have 5 kids myself, 6 counting my step daughter. I can confirm, when one of them starts to do something stupid, I tell em "Go ahead, we have spares."
I love how in some videos Linus says "Ridge wallet is trying to redefine the traditional wallet" and in others he says "Ridge wallet HAS redefined the traditional wallet" . The duality of man
Hey bro I watch ur videos. Love your channeI
Did not expect you here
im not the only one who noticed it
He's addressed this in a WAN show. He's following the given talking points and has brought this up with them in the past
If you watch the WAN Show before some weeks, he acknowledged this fact that "they have done it ladies and gentlemen" since the script was indeed changed by Ridge themselves.
I love how they iterated on the custom reservoir for months and Linus is just going to cover it with a desk mat.
That was my first thought
@@Benni711 don't forget the keyboard
@@ForestLandscape0 don't forget the hand
Its not just a desk mat its a LTT desk mat lmao
makes the glass seem pointless
“They have 4 other children” yoooo new linus lore
This needs to be added to the wiki
WeirdChamp
@@THE1stBRAINinTOWN you have no friends
Explains alot
Linus fan fiction?
They fucking did it. Ridgewallet finally redefined the traditional wallet
LTT: Making the ugliest custom desk PCs on the internet since forever.
@@deprecated7617 what????
@@deprecated7617 yea, what??
@@JS-kc1tm just a troll, ignore him
Ridgewallet is great if you don't use Cash or so.
As soon as you livin' in a Country which doesn't has one Buck Bills but gives you coins for it - It's questionable.
LTT-Crew:
Builds custom reservoir with LTT-Logo
Linus:
Throw Deskmat over it
PCMR scumbaggery
To be fair that desk as a whole was nothing to write home about, they didn't even show any Glamour Shots of the finished thing. Seems like it got rushed out for content, or just to get it off their filming list.
This comment made me keep watching. I hate the custom waterblock but if you put a mat over it I think I'd like this thing. I'm tempted to see if I can DIY something like this to hide my PC
@@superkillrobot This video was a trial run cor the PC. Another video with the finished build, with RGB and setup showcase will be uploaded soon.
@@superkillrobot Yeah look at revised title they change after upload to be more relevant after algorithm wants the clickbait title. There will be a final part where they finish out the project, if anything this wasn't to get it off their list but keep the project active on the channel.
My eyes are blessed with the dark mode intro wow 🤩
@@michaeljackson8390 imagine being a bot lol
@@FM_MC Wrong command. Try again.
It’s been dark mode for a while now I think
@@lukmly013 ?
@@FM_MC I just imagined being a bot, as you said
"The goal was to give up absolutely nothing in terms of performance."
Wasted opportunity to say: "The goal was to leave absolutely no performance on the table."
Underrated comment good job lad
He said that yet has a mid range GPU, and not even the top end variant of a LAST generation CPU lmao
@@pcmasterracetechgod5660 In all fairness,
most workloads cannot appreciate the raw pwer of current gen top end hardware hardware.
The software hasn't caught up
(☞ ͡° ͜ʖ ͡°)☞
But a 3070 tho?..
LTT: "We're working super hard on this desk PC!"
DIY Perks: "All made in home."
This is another Tuesday for DIY PERKS XD
Honestly, it feels like they threw in the towel on this build because of how severely outclassed they were on this build. DIYPerks PC builds have out done everything LTT has built in the past year, and honestly a lot of other channels as well, and they do it without reusing the same dusty old parts in each video.
LTT should donate their entire workshop to DIYPerks. All these tools are wasted on them...
@@arc1t3ct-9 Well, LTT are profesionals, so i don't think that should be the case.
DIY Perks is more "humble" so to say
@@Yurch890 Professionals at manufacturing? They have some of the most expensive tools on the market and they don't even use them. I'm guessing they were planning to do something similar to Hacksmith but they got bored and gave up.
Linus: "The goal was to give up absolutely nothing in terms of performance"
Linus 10 seconds later: "it's got a 3070"
jaw droped tbh
I came straight to the comments after that part of the video cause it makes zero sense.
@@somebody22222 It's still a damn good card.
@@somebody22222 me too, everybody expecting 5950x and a 3090 haha
Could've just made a nice dock for a laptop with a 3080 mobile neatly integrated into the table with maybe ducts for the rear and bottom vents so that it isn't as loud or something like that
You should really do a setup with DIY Perks guy. His attention to detail and your access to crazy parts would be a nice combo.
DIY Perks doesn't need Linus half-assing his builds lol. Maybe they can hire Matt to properly finish their builds when Linus has to go film WAN Show lol.
The gpu shortage is real when Linus uses a 3070 in his no-compromise build.
They said it was for thermals in a previous vid
poor linus only a 3070
@@AustinSBs that sounds like a compromise
He doesnt need that much in his office.
uh huh
7:07 Make sure you use a brad nailer in a perpendicular orientation to your rails. This will help compensate for a potential blowout. The head of the nail is more likely to deflect perpendicular from the orientation of the magazine (left/right when holding the nailer upright.) But when using MDF, this isn't a huge concern.
Lol these guys would never give two shits about details like that. They’re gonna paint that shit black and pretend you can’t see it on camera.
When you want to go to a LAN party and have to carry your entire desk with you
Minibois why do bots spam you
Did you copy this from someones vid?
@@michaeljackson8390 im going to report you for advertising
Or you have to host every time.
@@michaeljackson8390 bruh you're preaching bullshit
"Have we like, seen if this actually reaches?"
"Nope"
I'm glad these guys are building PCs and not bridges.
Makes you wonder where his “engineers” got their degrees lmao.
"The goal is to get it done, not get it perfect"
- LMG Motto
Light machine gun motto
They are The Red Green Show of PC building. If they put any more videos on Linus' filming schedule he's just going to start Duct Taping PCs together.
@linus To find air leaks, use a 4ft hose with one end up to your ear and the other about a quarter inch over the search for a leak area. The air leak echoes and amplifies up the hose when you are near the source.
"Leaving [...] his parents childless! ... Actually they'll be okay, they've got 4 other children" - Linus sebastian 2021
bruh are you telling me that there is 4 more linus people??? LOL
lmao
TIL, that Linus somehow has siblings dispite displaying only-child energy since forever.
Linus: "NO COMPROMISE PC"
Also Linus: "the goal today is get it done, not get it perfect."
“No compromises, unless I have other stuff to film” -Linus, probably.
If they didn't delay it more then it wouldn't be a LTT build
“Leave no performance on the table!”
Also Linus - picks a 3070.
Leave no performance on the table- put it in the table instead.
@@cegathelich lmao
I know right wtf shove a 3090 in that bastard 🤣🤣
"no compromises!" yeah, about that...
3080s and 3090s are thicccc cards tho and they needed it thin is probs why
Things I'd do differently if I was going to try this:
1) Soft front edge for the desktop.
2) Under-desk cutout for the user's legs (machine would be built into the rest of it, and thickness wouldn't matter that much).
3) Monitor(s) attached to a monitor arm rather than resting on the desktop, which enables the last feature -
4) The desktop is hinged and can tilt up for easy access to the internal components (kind of like a car hood).
Linus: "I can't hear anything, turn off the lights"
Patrick Star: "I can't hear you, it's too dark in here"
umm... lights make buzzing noise due to incorrect fitting and overtime big tubelights or LED start making it even more louder
@@gwadamit8116 common sense knowledge won't stop me from making a SpongeBob reference
@@traitorkat346 that's the spirit!!
@@traitorkat346 You're a little confused but you got the spirit.
I get the reason for the lights due to ballast/controller buzz - but that's on level with turning the radio down when you're trying to find a location.
Linus: how much did this thing cost?
Colin: A lot... Don't drop it!
Man knows his audience.
And knows his boss too
Well honestly Indian RUclipsr "Dynamo Gaming" has a better looking desk PC than him.....
@@manishkumarpandey9702 Well obviously, his pc is thicc as fuck and linus desk pc is only 8 cm tall. There's a LOT of diff on that single aspect
2019-Early 2020 : GOOD OLD LINUS
2020-) : BEARD GUY TAKES OVER LINUS USING DEEP FAKES
He is not dropping things lately !! He seems like sus
@@michaeljackson8390 shut up
@@EezoTheChezo 0
2019-Early 2020 : GOOD OLD LINUS
2020-) : BEARD GUY TAKES OVER LINUS USING DEEP FAKES
@@EezoTheChezo no subs, a spam report
when he pulled out the sledge hammer i thought he was about to destroy the desk with the computer parts inside it
I thought about his sandals and open toes. Then I saw the swing and knew everything was going to be safe.
Watching him swing that hammer did more to establish his nerd cred than any number of PC vids.
@hoiy vinosa fluorescent tubes can produce quite a lot of sound. Mainly older ones though.
@@jnkokseby staple of horror films.
"Absolutely no compromises in performance ..." adds 3070
Pretty sure the reasoning was covered in Part 1. It was either a size or heat limitation, not sure exactly which.
@@iClone101 well thats a compromise smh
@@angery5879 lmao 😂 😂
Or just a stock limitation, given how overkill a 3070 already is for the work Linus does?
They probably needed all the 3080s and such for projects that actually needed that kind of performance
3080 and 90 run too hot. Probably didn't wanna risk it on the first build
As good and well-engineered this is, it just makes me appreciate DIY Perks even more!
Love you both!
Right? The level of effort Matt puts into actually completing a build is amazing. Could you imagine him leaving a build 80% done and saying "Right, well now I have to film something else, hope you enjoyed this video."
I wanna see this "case" tested by Gamers Nexus, lol
Autistic caveman: "The 'case' is garbage because the airflow is not adequate enough which causes a 2 degree difference thus making the whole thing useless"
Also Autistic caveman: "Now if you excuse me, I'm going to go pester NZXT and Dell about crap no one cares about but us. You can watch our 24 minute long upload about it, it will be the one with the pretend mad eyes thumbnail."
@@BenderBendingRodriguezOFFICIAL to be fair he could have created separators to make it better.
@@BenderBendingRodriguezOFFICIAL Who hurt you? Why do you make things up?
@@AngelicHunk what he said was accurate 🤷♂️GN is weird AF, nit picks things not a single person cares about
@@AngelicHunk your sister.
Linus, spending thousands of dollars on a new rig: "this is for my writer's knees benefit"
Add the cost of labour it took to build that thing, and it might just be the most expensive piece of furniture they have in the office - just for hiis writers knees
I don't think you quite understand how many knee's the old desk effectively arrow'ed. -CW
@@LinusTechTips you are selfless. That is solid.
#bossgoals
all about ergonomics
Linus' singing could never be copying right striked, it's definitely a new creation I've never heard before.
I Imagine Matt from DYI Perks is laughing manically whilst watching this video. But still in a friendly, delightful manner.
His table PC was incredible!
"The best part about your employer shaving years off your life, it's all the years your employer won't miss anyway." Wow.
no one will find out what I said here...
He should have donated / recycled the desk. That’s a bunch of wood that now will end up in a landfill!!
@@philiplubduck6107 yeah just what I was thinking
putting a wide-angle camera so close that it got twisted on impact will do that to you ;)
@@PLAYCOREE Mate, do not talk to the bot - it is ignoring you. Just report it to other (RUclips ones) bots so they can ban the spam bot ;-)
Good spot!
Just a note for the analytic side of LMG. Thumbnail barely saved this video for me. I have been waiting for desk PC update and almost missed it because title is too vague and thumbnail kinda hard to distinguish. Didn't really sell this highly desired content
100 % Agree
I mean it wasn't even a great conclusion. They once again rushed through a fun project so that Linus can go film something else. It doesn't seem like a video they were very proud of, and rightfully so.
@@superkillrobot I agree, there's nothing fundamentally new about another desk PC. So why multiple episodes were dedicated I have no idea, it's pretty boring.
I do agree but to play devils advocate it does say in bright yellow capital letters ‘DESK PC’ in the thumbnail
bruh
The fact that these guys put a 3070 in here really shows the extents of the shortage
And a third generation processor. I think it says more about how cheap lmg is
They re use many many old props and video tools
3070s are sick tho
@@ethannguyen2551 are u dumb ITS A THREADRIPPER NOR ZEN 2 THAT 3970X COSTS 4000 DOLLARS
Reading scripts doesn't take much resources to run
5:52 PRO TIP @ LINUS: If you have a leak that you can't see or hear, get some soapy water, and rub some of it over areas that are suspected areas for the leak. If air comes out of a particular area with the soapy solution over it, it will create bubbles, showing you where the leak is.
Learned this from fixing car tires XD
They did exactly that in the previous episode, dunno why they didn't do it on this occasion.
Linus is mad that after all this effort DIY perks still makes a better pc
Linus should be ashamed, all of his expensive machine that Alex bought clearly pays off. LOL
Also the DIY perks project is also a guide for you to build a similar one if you want to. LTT videos have transitioned to mostly just “watch us do cool shit” kind of videos not many “tips” to be found here
Yeah, they could've used DIY Perks build as a guide. There should be no shame in that, cause it was simply phenomenal.
Is this a collab prompt?
@@justinedzard I'd like it
LTT: Spends $100K's on fully equipped workshop
Colin: Let me break this with my knee!
When you look at the build of the desk it seems like the general philosophy here.
me: Oh you could sell that desk
Linus: Yeah, let´s brake it
Me: what
Break?
Break*
It's ltt. I would have expected someone to do flips for it. But also dramatic shots
@Tom Simons ☑ wow tommyinnit the real
Linus doesn't really want to sell his old stuff to people if it isn't good working condition. Remember the Lambo?
Apply a small amount of water and soap to the tube joints while applying air pressure and looking for bubbles, which actually is quite significant. The quickest approach to actually locate leaks and literally avoid a proble, or so they kind of thought.
Missed opportunity....
Linus should have "Dropped" the old desk off the roof
You mean like chef mike?
wait have we EVER seen the roof?
@@agambansal902 Not really. The "drop" thing has gone from funny, to a thing, to tired and hackneyed.
@@michaeljackson8390 You've had too much weed mate.
Correction.. should've yeet it off a car drive-by style like he did that power supply.
You're in a studio full of mics, finding a leak should be easy 😂
I’m confused, what do you mean
@@thatpandaz6094 me too, I assume OP means sound leakage but that's about all I could think of
??
@@thatpandaz6094 using an microphone and turn up the mic sensitivity to find the leak
@@antonylin8669 exactly
Linus is 34?
I thought he was simultaneously 28, 42, and ageless.
Yeah same
Time works differently at the TVA- I mean LTT STORE.
You look like an off brand Justing. Y
Justin*
Same
In fluid dynamics class, i was taught it is much better to suck than push air. Pushing air goes a very very short distance, whereas one can suck a very long distance.
I expected more than a 3070, but regardless of graphics card, this is one epic feat of engineering!
Single slot capability for mounting, reason why I still love my 1080ti
@@xXDarthBagginsXx the Asus ekwb 3080 is also just one slot deep.
@@xXDarthBagginsXx you know what, I stupidly hadn’t considered that. Makes complete sense now. I wonder if the 3070 Ti is the same profile or is that already 3080 size?
Either way, fair point well made.
@@HamerReviews Same reason you wouldn't put in a 3090, he wouldn't use this for gaming barely any of the time, and that a 3080 would dump more heat into the system when they weren't sure how good the cooling performance would be.
@@njoshua3265 yep, I’m pretty stunned by their cooling numbers. It’s certainly a great pc layout
STILL NOT OVER? IM GONNA BE 35 YEARS OLD WHEN THIS PROJECT ENDS
They can only shoot 10 mins at a time before Linus has to go do another WAN Show.
Given I'm 46 already, there's a chance I'll be dead!
"give up absolutely nothing in terms of performance"
**puts a 3070 into the system**
My thoughts exactly.
and a 3970x not even a EPYC.
Maybe the thickness?
I was just about to post this very comment.
@@shyataroo a 3990x or 3995xw is better than epyc for gaming and most editing cases because same amount of cores much higher clock
"ZERO Compromises"
Also Linus: -"The goal today is get it done, not get it perfect."
“She’s a wet boy”
Is that a classic Linus line? It’s a very faint memory, but I think so
"She's a thick boy" is one too
Was the desk made in Thailand?
@@oliver.cerezo oh no.... Or do I mean OH YEAH
@@schdvtnmy I don't remember where it's from but I'm sure it's from that short circuit video of that one keyboard
@@shanedoesyoutube8001 either that or the a 3090 video
"This desk means nothing to me"
WhistlinLinus
Looks crap but at least they covered with that pad, but that pad also looks like crap, so i hope they can work remotely so they don't have to look at it
Elite
Everyone be gangsta till they pull out diesel at a tech channel.
"I'm firin' mah laser"
Now that's a meme I haven't heard in a long time...
It's an older meme, sir, but it checks out
Doctor Octagonapus liked this comment.
Basic rule of acoustics: reduce turbulences, increase laminar flow. Never push the air, always pull it. This reduces the turbulences and thus the noise. Also, a laminar air flow cools better. Therefore always mount the ventilators at the end, at the exit, after the coolers. You have to do the opposite of your mount for optimal performance.
"it's expensive, don't drop it" is probably both the most said and ignored sentence around Linus.
Everyone be gangsta till they be playing microsoft edition solitare.
He literally hired two engineers to make him cool sh*t like this. The ultimate flex.
Linus should hire me too, now that he has the new house to renovate. Mixing some hand made furniture with hi tech stuff would made a nice mix 😌.
@@WhyDontYouBuildit he doesn't hire anyone that is better than him. He wants to keep that alpha dog illusion.
That's like saying that someone hired 2 prostitutes to have sex. Not that impressive.
@@Gaetano.94 Two dirty ässholes of money.
@@Gaetano.94 Sure, if you decide to look at it that way. But still, it would be like hiring 2 full time prostitutes and being their pimp; not the average hiring xD
I always completely draw a blank when I look at videos like this but what I do know if I had money and wanted powerful performance, I myself would leave to the pros. I don't have the time, patience, knowledge, or the nerves to ever attempt doing stuff like this. So I can respect people who can put complicated products together.
Fun fact: sledgehammer weighs more than linus
That's true
Spelled weight wrong
@@Gloryboycruz yeah I noticed that he spelled it wrong
@@Gloryboycruz my bad sorry
@@fabioesposit0.0 also sledgehammer*
0:19 Millions of voices without desks cried out in terror, and were suddenly silenced. I fear something terrible has happened.
You are right man,i can feel it
Totally unnecessary to destroy the table just for views. He should have gifted it to someone.
@@coolcat23 you are right,if he would gift it to someone, he might be get more views
@@coolcat23 100% agree. One man's trash is another man's treasure. Desk should've been donated to a local fan for pick up with a signature if they wanted one. Dude needs to eat some humble pie!
“Send her off”
“Goodbye Sweet Prince”-Linus 😂😂
It's a gender fluid desk.
@@C-Handle hahaha I’m not one to judge
seeing linus excited makes my day
Linus: *The moment of truth!*
Me: * The moment of... Before I will tell you that I would like to tell you this segue from our sponsor!*
Missed a moment to table flip gen1 off the roof ngl
I'm surprised he didn't just sell the desk, they would probably make more money than what they put into it from the fans. But it is the proper sent off
or donate the desk
I can't even afford it and I wanted to buy it.
Auction it out for charity would be another option.
Shipping would have been a huge pain.
Only feasible if they completely disassembled it, maybe and it would have still cost a pretty penny.
the desk part looked like garbage and so does the new one. From the top it looks great and the PC build inside is awesome but LTT is not a furniture maker
I appreciate the little riff from Safety Dance that Linus sang
The title changed from "The moment of truth" to "It's a HUGE Success!!" right when I clicked it LOL
Oh it hasn't changed yet for me! xD
I've seen it change and change back after I downloaded it lol WTF
Jake or Alex can't win the title war in their work group char 😂
It changed back.
Apparently calling it a success was a bit premature. LOL
*TRUTH
Opposite 4 me
Did anyone else’s heart stop when he took a hammer to the old desk pc
what a waste of materials lol >_
my heart stopped when he missed that strike in a big imovable object
That was 100% assinine. A charity auction for it would have brought in way more views.
Mine did, when I saw that he was wearing sandals.
Before i saw it was empty
Suggestion: Weather stripping to create a slightly better seal. I say slightly because that thing looks like a positive-pressure nightmare.
yup, some thin stuff on top, and thick stuff in the wire holes, and the fans won't have to work as hard.
Well honestly Indian RUclipsr "Dynamo Gaming" has a better looking desk PC than him.....
Manish Kumar Pandey huh lol, have seen the one DIY Perks built?
i have 3 dreams i want to achieve, #1 is getting a rig that isnt just a large paper weight, #2 is helping one of my friends get a rig (which would come after i sort my rig out), and #3 isnt related to gaming or PC, watching this insane build is amazing!
So first Linus flexes with a Porsche, and now he's destroying priceless lumber in front of our eyes? Dude's got 2021 drip.
“No compromises!!” *doesn’t use titan, quadro, or 3090. Doesn’t use 128 gbs of ram* /s
i think linus means like no compromises for that hardware, like usually a thin desk pc has to have a crazy low profile water cooler that might even be specially made, or a power supply that was modded to be thinner.
@@CTMKD e
@@CTMKD I put /s cuz it was a joke. Satire.
pathetic
I get the feeling a lot of people would've been happy to buy the old table for a ridiculous price.
exactly... desk PC LTT edition.
They even got a store for it.
+
Yeah, with supplies of everything being what they are right now, that was pretty wasteful (and disappointing to see)...
The original is super cheap to recreate
@@mourngrym1969 its wood
They're busy trying to find a leak and some musician is practicing jazz in the background. Very helpful. (Yes I know its stock audio)
Imagine if Murphy's Law kicked in
Took 4 years and is still thicker than the DIY perks desk pc lol 🤣
I was thinking the same 😅
His is simpler tho
When your laptop is thicker than this pc and literally give 1/100000 of the performance
wtf are you playing on, commodore 64?
You're supposed to lay your laptop down on the large flat side, not the thin sides.
what r u running on bro like sure threadrippers and 3070 is good but 100000 lets say laptop 2060 maxq (s) can match up (lol taking a joke literally is cringe ik)
Who’s laptop is more then 8 cm thick?
@@kyzora_2710 to be fair this the internet...
7:24 Well that shit escalated quickly 👀
Imagine you rage at cs or something and smash you desk and then the computer shuts down
omg this is what i was thinking
My old desk causes a short or something so when I raged and hit my desk it would restart lmfao
The desk, the AK-50, Scott's back, and i am still stuck in Florida. Well 3 out of 4 aint to bad.
Man i have dreamed of that desk pc since he built it way back and it broke my heart that he just destroyed it
I know right????
Don't understand this.... why not to just leave it somewhere on the sidewalk so somebody can use it
@@Herbra85 or sell/give it to somebody who really needs it.
@@qbzerodp I think even to make auction becouse just because it is LTT creation many people would bit even unreasonable price and LTT could donate earnings to charity
While Linus is going Office Space on his old desk (or maybe "going Tom Green" since he's Canadian), there's a crowd gathering to watch.
Linus shoots the scene, then goes into Canadian apology mode, but a neighbor cuts him off with a hand wave, and a nod toward the hammer. "Ya finished?"
Linus (apprehensive): Y-yeah, I guess.
Neighbor: "Cool." (Picks up hammer, commences smashing.)
Try using the thermal camera to find air leaks.
This should work, the air will heat up when compressed, though the difference may be minimal by the time it's caught on camera.
For maximum style points, however, Schlieren imaging should be used instead.
@@Llohr ngl this is the first time I heard of this very interesting concept, but doesn't seem quite practical to have your $3k components hanging in front of a mirror to find a air leak. They were already freaking out moving it between tables.
Put a chunk of dry ice in the res and get it wet.
@Zachzedzach yes this definitely works for finding leaks in a tire or also gas leaks but too risky to use in electronics.
@@buca117 I don't how much moisture such smoke carries but that is definitely a great way to make non residual smoke
Everyone who hasn’t watched the other parts will be like why isn’t it a rtx 3090
@@michaeljackson8390 No u.
didn't watch those parts, why isnt it?
@@michaeljackson8390 shut up
@@javidzhang none would fit, this was the only watercooled GPU that could
@@javidzhang wouldn’t fit
That is also what she said😂
I died a little bit inside when he out the desk mat on it that covered... EVERYTHING
Man that's a sick desk! It'd be cool to see it in the office all setup and to see the magic glass in action.
As a guy who's waited nearly 4 months for my desk from Ikea, it hurts to see a desk destroyed :(
Me saving for 8 months for my pc☹️
0:20
It’s enough to make a grown man cry because that’s NOT OK
@@michaeljackson8390 shut up
Linus:Goodbye gen 1 desk pc
Me: I wish I had that hardware
0:20 perfect use of lockdown, using roads to break things
"Turn off the light.....I can't hear the leak"
or "Not so loud...I can't see the leak"
My guess was he had florescent bulbs in there and they often make a sort of humming sound.
@@robertk1701 exactly that
@@robertk1701 Nah, it's like when you turn the radio down to park better
Dear Linus.
This is crazy.
Signed Everyone.
PS: No really, it actually is.
Signed
But here's my number.
So call me: Maybe.
I still have yet to see any actual humans using Ridge Wallet when they weren't being paid to do so. lol
It’s awful. I bought one. It’s super uncomfortable, and it scratched the shit outta my cards and honestly is super inconvenient. It’s the equivalent of just having 2 rubber bands around your cards. It’s bad
I used it for 2 days and put it all back in my old leather wallet kept the carbon fiber bottle bottle opener tho
I havent had an issue with it and have used for over a year and a half. I didnt pay for it but if something happened to this one i would buy one myself. Havent had a card scratching issue but it isnt all to smooth to slide in the cards the girst few days. Once broken into its very comfortable and the size even with the clip or strap is just great. I hold 10 cards but i believe it can hold 15 at which point it might end up feeling awkward
Alex and Madison are my favorite people on the LTT team.
GGs Linus, hope you enjoy the new PC.
Linus: Has a whole desk space to layout components.
Also Linus: The GPU has to be 1 nanometer away from the motherboard.
If the riser is too long it can cause performance issues
I have been waiting too long for this
He Builds a custom desk, with glas to see through and covers ist with his gigantic mousepad, GOOD JOB LINUS!
When DIY Perks has done it first, and this just seems over the top.
Just waiting for Timmy Jo to try and burn this build
Yeah but the planning for this is more than an year
They built a nother one before diy perks ever thought of it
And LTT did it best
@@KorbinVelarde fanboy ;)
Heck, Ridge wallet finally redesigned the wallet, the day has come my friends.
So.... They never did start up the fans, eh. They were getting these temps, "passively" (with just the pump).
Yeah, my exact thoughts. The loop is so enormous that just water going trough them is enough to cool them down.
Surfing the comment section only for this kind of comments! I didnt see any of the fans working 🙄
You can clearly see them running at 12:07, 12:16 and 13:13, you guys must be thinking that the focused flow stator guide vanes are the fan blades, they're not.
@@FastSloth87 i must be mistaken for that yeah 👍🏻
@@FastSloth87 I look, but it's either just such a short amount of time, they're so fast, or the black on black - it doesn't even look like there are blades are there.
I have 5 kids myself, 6 counting my step daughter. I can confirm, when one of them starts to do something stupid, I tell em "Go ahead, we have spares."