Most awesome Mike! Love that “black belt in hi fi” at the beginning. Me and my huge SACD collection give you a big THANK YOU! I am going to give this a go.
Thank you so much Mike for putting together this excellent, simple to understand tutorial. I just recently dove into SACD ripping and was struggling to do so until I came across your guide. Followed your tutorial to the letter and it worked perfectly on my very first try! Again…..thank you good Sir!
Im glad you put together a video for this as that makes it MUCH easier to do this. I wish I seen this last year when I spent a few hours getting everything together. The part that I got stuck on for almost an hour was doing the USB drive insertion/removal and such in the exact order required. Just need to read the instructions/follow instructions to a “T” and it’ll work. This is the ONLY WAY you can get many DSD releases “digitally” (as in, portable) or for archiving purposes like Pink Floyd, Fleetwood Mac, Supertramp, and Miles Davis. I use the Onkyo HF Player on my iPhone and did drag-and-drop into the files app to play my .DSF files on the go. Onkyo HF Player isn’t updated very regularly and is a bit quirky, but it works. You just need an external DAC that supports DoP (DSD over PCM) at minimum DSD64 (2.82 MHz), but the program can do up to DSD256 (11.2 MHz). You can do up-sampling of PCM up to 352.8/384 kHz and do real-time high precision DSD output up to 5.6 MHz with any PCM file as well. EQs are supported too, album artwork, lyrics, etc. On a PC, Foobar2000 is probably the best option, but outputting DSD natively gets tricky. You need an external DAC of course but you need to install ASIO drivers and a few other things to get DSD native to work. Personally, I always ripped both stereo and multi-channel at the same time because I know I would end up doing it later I also suggest assigning your Blu-ray player a fixed/static IP address as well. If you use automatic settings, the address may occasionally change and this eliminates needing to find the address. The guide I read suggested keeping the DSD output setting on the player enabled instead of outputting PCM. Im not sure if it makes a difference at all, but based on your video it makes no difference. Just gotta make sure you have the SACD layer set instead of CD. Im sorry for rambling, but I am just really happy someone made a video on doing this. I know I could have, but never made the time to do so. Have a great day and once again, many thanks for this video!!
thanks for this. i had an sacd/dvd-audio setup 20 years ago but then when the receiver with the 5.1 inputs died i sold all but two of my discs, the player, and moved on. recently was talking with my brother and started thinking about it again. fast forward and i have a used sony bdp5100 on order to rip the two SACDs i hung onto (Steely Dan Gaucho and Dark Side) for playing back on my Denon receiver. can’t wait to hear them again for the first time in close to two decades.
Thank you, thank you. This is so much easier watching your video. I just found a Sony BX59 for $14 and followed your instructions. I am almost through my first sacd. You are right, it is much easier than I thought it would be. This is great.
I used a sony 5100 that I ordered on ebay with remote. Followed the steps exactly and it works perfectly. Ripped the dsd files loaded on my roon nucleus and they play gloriously on my HIRose R520. Thanks Mike!!
you can definitely download the files and put them on the R520 (you'll need to add the hdd). Then it will play the DSD file directly from there. I just use Roon and like the access to the files on other devices including ARC, even if they aren't played natively in DSD all the time. The R520 is fantastic. I use it with 2 Forte iii's. @@nickolaymiltenov
Intriguing! Nobody has posted to say if they preferred the sound of the DSD files from a DSD capable DAC over listening to the SACD from the player (which would normally be PCM I believe).
I've read that in Stereo there's little to no audible improvement either way. Which makes sense because SACD was always supposed to be a multichannel experience anyways.
Used a BDP-4100 and within 3 hours of it being delivered I had 2 sacds ripped following your guide. Only issue was the addition steps needed to get the exe file extracted on my Mac - all described on the GUI download page. Otherwise followed your steps and very grateful.
This tutorial is huge confidence boost to me as I sat on this idea of ripping SACD titles for years but never got to it. Just found some BDP-S5100 players online but I have to import it from Japan so a little risky and pricey. But I have few SACD titles and few of them are in Multichannel and can't wait to hear it fully so if these are all it takes to be able play those multichannel tracks elsewhere other than the disc player itself, I'd say it's worth a try. My highest priority is to rip my early SACD single layer titles and later SHM-SACD titles in single layer only as those don't carry CD layer and can't be played on anything but combo or Blu-ray/SACD dedicated player.
Mike, I am so glad I found your video as I have a rather large collection of SACDs and have been trying to use them with a LUMIN P1 I just picked up. (I highly recommend the player). I picked up a Sony Blu-Ray player on EBAY for $30 and your step-by-step instructions worked like a charm. 😉 One question I have is were you able to get the metadata with the transfer? I saw someone mention to transfer as .dsf but I think that's the default so I am not sure what else to try. If you have any suggestions, please let me know and thanks again for this great video!!!
The metadata should be embedded in the file I will take another look and see if I can find a solution. Thank you for the kind words and I am glad it worked out!
Thanks for that Mike, finally got round to trying it over the weekend with a BDP-S4100 I already had and after a few hitches (user error) it worked like a dream. Used Spoon's excellent dBpoweramp to convert to 24/96 FLAC. Just off to compare to Red Book layers 👍
Thanks for the tips, I have been following your thread in hifi haven, too bad my newly bought X800M2 player not able to rip SACD, I have followed the steps both in the thread and this informative youtube. Nevertheless I am able to extract the DSD to my DAC via HDMI/I²S interface, but that's via physical SACD played. I just ordered a Sony BDP S590 from eBay , main purpose is to rip SACD in dsf files to play on DAP and stored in SSD for network media player.
Okay, fourth time I'm watching this video... I got the Blu-ray from Goodwill, I got the thumb drive, I got to ethernet cord, I got the internet access, and I'm going to do it broski I'm going to do it I say...
Hi Michael, I've watched about 7 times to understand right. Still some problems: 1. I use a SONY BDP S790, the link refers to 6200. Will that work? 2. The GUI gives info as follows: Failed to connect libsacdread: Can't open 192.....:2002 for reading Any idea?
lol okay I’ve seen that Sony Bluray player at my sisters house and NIN’s The Downward Spiral is specifically the reason I’m wanting to figure out this SACD rip process. Weekend plans=solidified
@@audioarkitekts That's awesome, thanks. I fought my way through it, took a while but I finally figured it out on my own. One thing I wanted to add, whether you change your instructions or not is of course up to you, but one of the dumbest parts is what hung me up. For all you amateur Windows rookies like me, when you "Open the SACD Extract GUI", you don't run the EXE file, it just blips and disappears. You run the .JAR file and tell it to open with Java when it pops up. I was stuck on that for a day not knowing what the heck I was doing and fighting with my OS thinking AV or something was killing it when the entire time, I was trying to run the wrong program. And thanks for your effort. I would have never figured this out had I not stumbled on your YT video. I've been ripping my SACD collection non-stop since I got this figured out. Having them digitized on the network is going to be AWESOME!
really Thanks for the video, very good, i did everything every steps like you said, use the software format usb, copy AutoScript, and put USB to the player (sony), but the tray didnot open, do you have any suggestion? thanks~
Thks Mike, Great video! I can't find the list of compatible hardware in your links. Can you please post it somewhere? Do you think a bdp 4100 is good for this kind of task? Thank you
Thank you for the tutorial. I do have a Sony 4k bd player with SACD but I'm not sure if it is compatible for this task. I'm going to try anyway. Thanks again.
Thank you for your video! I'm going to find a blue ray player, I wonder if this only works on certain model or on every blue ray player that can read SACD?
if my DVD player have not ethernet, is it not possible for ripper SACD such as pioneer DV-S989 avi? or will have any idea for arrange ripping SACD? thanks.
hi Audio Arkitekts, I need some clarifications on the connections required when ripping the SACD. Do you need to connect the blu-ray player to the internet? do you also need to connect the blu-ray player to your PC? but my desktop PC only has 1 LAN port that is already connected to my router internet LAN port (also only 1 LAN port) that connects to my PC. There are no more extra LAN ports (be it from my router or desktop) to connect the blu-ray player. How am I going to connect my blu-ray player to my PC and Internet at the same time? Do I really have to do that? Please enlighten. Thank you.
Mike, thank you for doing this! I have one question. When using Rufus to format the flash drive, Rufus requests that you make a boot selection or make it non bootable. If you choose disk or ISO image, you must select a file...What file should I select...and is it something to be downloaded? Thanks again!
@@audioarkitekts Thanks very much...now I have it working...extracting as I write this. I found it easier to run the command line interface as administrator and use diskpart to format the flash drive as FAT32 and MBR. Only hiccup was not putting the extract program at the root the first time. Thanks again.
So I got to the part where you do the test and it says accessible for me. But when I hit run it doesn’t seem to do anything. I hit print so it shows all the info when roping, but it just acts like it’s frozen. Didn’t do anything for about 40 minutes. Am I doing something wrong?
The link to your written article doesn't seem to work. Luckily for me, I've saved all the files and can recreate the article, but what are newbies to do?
@@audioarkitekts Awesome (both the original article and updating the link). BTW, your instructions say that you need a remote to control the Blu-Ray player. Many TVs support HDMI-CEC through which you can use your TV's remote to control the Blu-Ray player, thus eliminating the need for a special remote.
Thanks for the video, very exciting. I ask you, how can I burn dsf files to a dvd to be able to play it on a marantz ud 7006 from now on I thank you very much, greetings!
GUI extract program will not run on any of my PCs. I overrode the security warning. After that when trying to run the program, the screen flashes and nothing happens and it does no show a running program in the task manager.
You've most likely clicked on sacd_extract.exe. This is a command line utility and if you launch it from Windows Explorer it'll quickly pop up the command window and immediately close it out. You need to click on SACDExtractGUI.jar instead.
Thanks. This was a good beginning. I had trouble opening SACDExtractGUI until I put it into a Windows Batch File. Now we need some further instruction on how to produce .dsf files that do not make a "click" between tracks. Do you know how to do that?
"I chose Wi-Fi since I have blazing fast internet". When I make mac and cheese I always use an electric kettle because I get 50 Amp service to my house.
I wish this video was out 2 years ago while trying to figure it out myself. Great job!
Thanks Neil! Hope this helps those that need it.
Most awesome Mike! Love that “black belt in hi fi” at the beginning. Me and my huge SACD collection give you a big THANK YOU! I am going to give this a go.
Thank you my friend!
Thank you so much Mike for putting together this excellent, simple to understand tutorial. I just recently dove into SACD ripping and was struggling to do so until I came across your guide. Followed your tutorial to the letter and it worked perfectly on my very first try!
Again…..thank you good Sir!
That's awesome! I am glad it worked out for you!
Im glad you put together a video for this as that makes it MUCH easier to do this. I wish I seen this last year when I spent a few hours getting everything together. The part that I got stuck on for almost an hour was doing the USB drive insertion/removal and such in the exact order required. Just need to read the instructions/follow instructions to a “T” and it’ll work.
This is the ONLY WAY you can get many DSD releases “digitally” (as in, portable) or for archiving purposes like Pink Floyd, Fleetwood Mac, Supertramp, and Miles Davis. I use the Onkyo HF Player on my iPhone and did drag-and-drop into the files app to play my .DSF files on the go. Onkyo HF Player isn’t updated very regularly and is a bit quirky, but it works. You just need an external DAC that supports DoP (DSD over PCM) at minimum DSD64 (2.82 MHz), but the program can do up to DSD256 (11.2 MHz). You can do up-sampling of PCM up to 352.8/384 kHz and do real-time high precision DSD output up to 5.6 MHz with any PCM file as well. EQs are supported too, album artwork, lyrics, etc.
On a PC, Foobar2000 is probably the best option, but outputting DSD natively gets tricky. You need an external DAC of course but you need to install ASIO drivers and a few other things to get DSD native to work. Personally, I always ripped both stereo and multi-channel at the same time because I know I would end up doing it later
I also suggest assigning your Blu-ray player a fixed/static IP address as well. If you use automatic settings, the address may occasionally change and this eliminates needing to find the address. The guide I read suggested keeping the DSD output setting on the player enabled instead of outputting PCM. Im not sure if it makes a difference at all, but based on your video it makes no difference. Just gotta make sure you have the SACD layer set instead of CD.
Im sorry for rambling, but I am just really happy someone made a video on doing this. I know I could have, but never made the time to do so. Have a great day and once again, many thanks for this video!!
Thanks Michael! 😊
thanks for this. i had an sacd/dvd-audio setup 20 years ago but then when the receiver with the 5.1 inputs died i sold all but two of my discs, the player, and moved on. recently was talking with my brother and started thinking about it again. fast forward and i have a used sony bdp5100 on order to rip the two SACDs i hung onto (Steely Dan Gaucho and Dark Side) for playing back on my Denon receiver. can’t wait to hear them again for the first time in close to two decades.
Thank you, thank you. This is so much easier watching your video. I just found a Sony BX59 for $14 and followed your instructions. I am almost through my first sacd. You are right, it is much easier than I thought it would be. This is great.
That's awesome to hear! This is why I do these videos
I used a sony 5100 that I ordered on ebay with remote. Followed the steps exactly and it works perfectly.
Ripped the dsd files loaded on my roon nucleus and they play gloriously on my HIRose R520.
Thanks Mike!!
Awesome! Glad it worked out!
Doesn't R520 itself support hd dvd drives via usb for ripping or just for playback? I am hesitating should i buy it or not. What is your advice?
you can definitely download the files and put them on the R520 (you'll need to add the hdd). Then it will play the DSD file directly from there. I just use Roon and like the access to the files on other devices including ARC, even if they aren't played natively in DSD all the time. The R520 is fantastic. I use it with 2 Forte iii's. @@nickolaymiltenov
Got a 5100, followed your instructions, and it works. Much appreciated!
That is great to hear! Enjoy it! 😉
Intriguing! Nobody has posted to say if they preferred the sound of the DSD files from a DSD capable DAC over listening to the SACD from the player (which would normally be PCM I believe).
I've read that in Stereo there's little to no audible improvement either way. Which makes sense because SACD was always supposed to be a multichannel experience anyways.
worked like a charm, thanks for the clear instruction, the good pace and clear demonstration helped so much, did not hit one single error :)
Glad it helped
Excellent. Didn't realize how easy this was.
Glad you were successful
Used a BDP-4100 and within 3 hours of it being delivered I had 2 sacds ripped following your guide. Only issue was the addition steps needed to get the exe file extracted on my Mac - all described on the GUI download page. Otherwise followed your steps and very grateful.
This tutorial is huge confidence boost to me as I sat on this idea of ripping SACD titles for years but never got to it.
Just found some BDP-S5100 players online but I have to import it from Japan so a little risky and pricey.
But I have few SACD titles and few of them are in Multichannel and can't wait to hear it fully so if these are all it takes to be able play those multichannel tracks elsewhere other than the disc player itself, I'd say it's worth a try.
My highest priority is to rip my early SACD single layer titles and later SHM-SACD titles in single layer only as those don't carry CD layer and can't be played on anything but combo or Blu-ray/SACD dedicated player.
Excellent tutorial, worked first time for me. gives me the option of playing the recording back through my dac.
I followed the instructions and it worked. Thank you so much for posting.
That's great! Thanks for the support!
Fantastic video! This method works perfectly, thank you!!!
I'm so glad it worked out for you. Enjoy the Christmas weekend!
Mike, I am so glad I found your video as I have a rather large collection of SACDs and have been trying to use them with a LUMIN P1 I just picked up. (I highly recommend the player). I picked up a Sony Blu-Ray player on EBAY for $30 and your step-by-step instructions worked like a charm. 😉 One question I have is were you able to get the metadata with the transfer? I saw someone mention to transfer as .dsf but I think that's the default so I am not sure what else to try. If you have any suggestions, please let me know and thanks again for this great video!!!
The metadata should be embedded in the file I will take another look and see if I can find a solution. Thank you for the kind words and I am glad it worked out!
Thank you, Mike. Works perfectly. I really appreciate you putting this together.
No problem! Im glad it worked out.
@@audioarkitekts I'm listening to one of my new SACD ISO images now.
Thanks for that Mike, finally got round to trying it over the weekend with a BDP-S4100 I already had and after a few hitches (user error) it worked like a dream. Used Spoon's excellent dBpoweramp to convert to 24/96 FLAC. Just off to compare to Red Book layers 👍
Nice! I'm glad it worked out!
How can I hook up? Minidisc mxdd400 HP computer I want to push songs in to iTunes
Thanks for the tips, I have been following your thread in hifi haven, too bad my newly bought X800M2 player not able to rip SACD, I have followed the steps both in the thread and this informative youtube.
Nevertheless I am able to extract the DSD to my DAC via HDMI/I²S interface, but that's via physical SACD played.
I just ordered a Sony BDP S590 from eBay , main purpose is to rip SACD in dsf files to play on DAP and stored in SSD for network media player.
So this definitely does not work wit the X800M2? Asking before I try.
@@clarkdevan ya, I have tried X800M2 but there's no response to initiate the ripping
@@auronthasOnly a handful of Sony players can do this,it’s dependent on the model,there is a list of those.
@@stogies3 ya, I managed to get an used 10 years old Blu-ray SACD from eBay and successfully ripped them in DSD format
Appreciate of your pro advice and instructions
Thank you for the kind words 🙏
I need to do this procedure on an Apple Mac. Thank you. DB
100 degrees outside in the shade, great time to mess around with this kind of stuff
Agreed lol it was a hot summer
It works. In my Sony bdp-s411 have to connect to frontal usb.
That's great glad I could help
Thank you very much.... The Sony 7200 works prefect.
Any special modifications to rip a multichannel file?
Okay, fourth time I'm watching this video...
I got the Blu-ray from Goodwill, I got the thumb drive, I got to ethernet cord, I got the internet access, and I'm going to do it broski I'm going to do it I say...
Excellent, just subscribed
Thank you! 🙏
How to burn SACD-R?
Ty
Hi Michael, I've watched about 7 times to understand right. Still some problems: 1. I use a SONY BDP S790, the link refers to 6200. Will that work? 2. The GUI gives info as follows: Failed to connect
libsacdread: Can't open 192.....:2002 for reading
Any idea?
lol okay I’ve seen that Sony Bluray player at my sisters house and NIN’s The Downward Spiral is specifically the reason I’m wanting to figure out this SACD rip process.
Weekend plans=solidified
Good evening, I need your help. I downloaded the Sacd/gui for windows and I can’t open the program. Thank you
Hi, where is the blog link with the instructions? im having trouble finding the right pieces of software and understanding this completely
Fixed! New Website is up!
@@audioarkitekts That's awesome, thanks. I fought my way through it, took a while but I finally figured it out on my own. One thing I wanted to add, whether you change your instructions or not is of course up to you, but one of the dumbest parts is what hung me up. For all you amateur Windows rookies like me, when you "Open the SACD Extract GUI", you don't run the EXE file, it just blips and disappears. You run the .JAR file and tell it to open with Java when it pops up. I was stuck on that for a day not knowing what the heck I was doing and fighting with my OS thinking AV or something was killing it when the entire time, I was trying to run the wrong program.
And thanks for your effort. I would have never figured this out had I not stumbled on your YT video. I've been ripping my SACD collection non-stop since I got this figured out. Having them digitized on the network is going to be AWESOME!
Everything works at the Sony end but I don't remember how to "load" it onto the laptop
really Thanks for the video, very good, i did everything every steps like you said, use the software format usb, copy AutoScript, and put USB to the player (sony), but the tray didnot open, do you have any suggestion? thanks~
Me too😢😢😢
@@fonnsherlock8180 my problem solved, my S590 need update firmware to M12.R.0510
@@kenchan4247I'm still unsolve 😢😢.
Great tutorial.
Thks Mike, Great video!
I can't find the list of compatible hardware in your links. Can you please post it somewhere? Do you think a bdp 4100 is good for this kind of task?
Thank you
Hey Bruno, I just updated the link, I have a new website and was migrating all of my content over.
Thank you for the tutorial. I do have a Sony 4k bd player with SACD but I'm not sure if it is compatible for this task. I'm going to try anyway. Thanks again.
If you follow the link to my blog in the description I have a list of compatible players! Thanks for the support!
Thank u so much sir
Can I also know about the dsd file that is in iso format? How can I play it or do I need to burn it to dvd? Thanks
I'm not sure, I never tried it.
Great video!!! The link to the site isn’t working. Anyway you can post a new link? I really appreciate it.
Thank you for your video!
I'm going to find a blue ray player, I wonder if this only works on certain model or on every blue ray player that can read SACD?
I have 2 Sony BDP S370 Blu-Ray Players, can I use that model? It's not on the list you provided, so is that a definite "no"?
I did t see the remote in the links? Was it removed? I see thumb drive, hdmi cable and monitor
if my DVD player have not ethernet, is it not possible for ripper SACD such as pioneer DV-S989 avi? or will have any idea for arrange ripping SACD? thanks.
I have sony uhd x700 player... do you have script file for this player?
hi Audio Arkitekts, I need some clarifications on the connections required when ripping the SACD. Do you need to connect the blu-ray player to the internet? do you also need to connect the blu-ray player to your PC? but my desktop PC only has 1 LAN port that is already connected to my router internet LAN port (also only 1 LAN port) that connects to my PC. There are no more extra LAN ports (be it from my router or desktop) to connect the blu-ray player. How am I going to connect my blu-ray player to my PC and Internet at the same time? Do I really have to do that? Please enlighten. Thank you.
Mike, thank you for doing this! I have one question. When using Rufus to format the flash drive, Rufus requests that you make a boot selection or make it non bootable. If you choose disk or ISO image, you must select a file...What file should I select...and is it something to be downloaded? Thanks again!
Make it bootable 😀
@@audioarkitekts Thanks very much...now I have it working...extracting as I write this. I found it easier to run the command line interface as administrator and use diskpart to format the flash drive as FAT32 and MBR. Only hiccup was not putting the extract program at the root the first time. Thanks again.
@@jimf5160 glad it worked out for you.
So for sacdgui to work or open you have to have the thumb drive in the blu ray player?
So I got to the part where you do the test and it says accessible for me. But when I hit run it doesn’t seem to do anything. I hit print so it shows all the info when roping, but it just acts like it’s frozen. Didn’t do anything for about 40 minutes. Am I doing something wrong?
Thanks!
Thank you very much!
And what can you then do with the dsf files? Can you bitstream them to a receiver over HDMI?
Wondering is it a must with a USB drive for the thumb drive?
The link to your written article doesn't seem to work. Luckily for me, I've saved all the files and can recreate the article, but what are newbies to do?
Sorry about that, it's been updated!
@@audioarkitekts Awesome (both the original article and updating the link).
BTW, your instructions say that you need a remote to control the Blu-Ray player. Many TVs support HDMI-CEC through which you can use your TV's remote to control the Blu-Ray player, thus eliminating the need for a special remote.
Does anyone know why some SACD's rip one track and then says "DONE"? I can rip most rock cd's but classical stop at 1 track
Thanks for the video, very exciting.
I ask you, how can I burn dsf files to a dvd to be able to play it on a marantz ud 7006 from now on I thank you very much, greetings!
Thank you
Link to written article doesn't work.
Rufus is not for macs, any alternatives?
GUI extract program will not run on any of my PCs. I overrode the security warning. After that when trying to run the program, the screen flashes and nothing happens and it does no show a running program in the task manager.
You've most likely clicked on sacd_extract.exe. This is a command line utility and if you launch it from Windows Explorer it'll quickly pop up the command window and immediately close it out. You need to click on SACDExtractGUI.jar instead.
What Jeff said! Good luck 👍 if you need any more help let me know.
Thanks. This was a good beginning. I had trouble opening SACDExtractGUI until I put it into a Windows Batch File. Now we need some further instruction on how to produce .dsf files that do not make a "click" between tracks. Do you know how to do that?
I dont but I will ask around and find a solution!
Can this be done with a Mac?
what do i need the USB-STICK?
My Best Regards
Mike: SA-CD 💿 is a hyphenated acronym.
Would this work with one of the original fat PS3s that can play SACDs?
so this does not work on external blu-ray drive connected to laptop and using something like dbpoweramp?
Those external drives can't read SACD layer, and it will only read CD layer on SACD Hybrid titles.
hello i can burn a iso sacd files to a dvd-r using apple dvd-rw superdrive ? thnx
I have another video on how to burn SACD
Does is rip multi channel?
is this tutorial work for bdp s4100?
Couldn't get past Rufus. It wouldn't format either usb stick.
It's Alive! Success, thank you Michael.
Can you then convert the dsd file to FLAC?
My Sony BDV-E985W , Can rip ?
What about the metadata
If you select 'DSF' format then the metadata will be automatically added.
gracias a mamá por cocinar y a papá por los gritos!
This did not work with a Sony BDP-S370. (Just in case someone searching through this might be wondering.)
link to written doesn't work
I fixed it
why is must moderm 4k uhd drive like lg do not read sacd?
Because its not a SONY player.
WavPack can losslessly compress dsd and dsf
it says done but there are no files in the folder can you help me?
Make sure the destination folder is correct.
@@audioarkitekts thank you for your help
why would you want todo that. ?
"I chose Wi-Fi since I have blazing fast internet".
When I make mac and cheese I always use an electric kettle because I get 50 Amp service to my house.
Funny, I'm watching this video looking to rip my SACD of The Downward Spiral as well.
Its an awesome album
@@audioarkitekts Especially in 5.1
I think I've ruined the stereo version for myself though lol
The website is down, what’s the new link?
Fixed! New Website is up!
Your website isn’t working ?
Fixed! New Website is up!
Cool
Linked website is offline.
Fixed! New Website is up!
I even think that ordinary CDs benefit from a DSD conversion, believe it or not!
SONY S380 not work...
I have better things to do, very very nice and informative video, regards from HiFi Serbia.
This work for Blu-ray’s too?