Thanks! Great tips. I’ve recently been laying out framing for a small house and discovered the coping tool to cut intersection framing members - such as the rafter to ridge beam intersection. Easier than a reference plane if the two pieces actually intersect.
Hi my friend. I hope you are doing well. I will buy the roofs course. Im learning a lot with you and Im going to new levels of quality here. Thank you!
The ridge in your example is a RIDGE BOARD not a RIDGE BEAM, so you need to add a collar tie in the upper thirs point of the rafter length, on the other option it would be a RIDGE BEAM but you would need a post from ridge beam to your your joist.
Thanks, Balkan Architects for this opportunity to have me enroll for the Revit roofs master class, however, I have one request please avail me the videos and files that can open in Revit 2018
How did you set up your graphics - the thick outlines look nice, also the fact that the wood displays in colour. I think you have ambient shadows - is that right?
Hi. I have a problem with revit where I draw a stair from 1st floor to second. and in first floor there is the cutline and above is in dotted lines. but from the second floor plan the stair is being shown fully. no cutmarks or dotted lines. just down arrow. is there anyway where i can show a cutmark in the second floor plan as well. adjusting view range doesnt do anygood.
It's meant to be shown in full since you can actually see the whole stairs from that level. It will only show those cut lines if the stairs passes through the cut range for that floor plan level.
Did you ever treat the subject of layered roofs to get a element part roofs and model different layer lengths ? Cause in Revit roofs can't be exploded...very strange.
Thanks! Great tips. I’ve recently been laying out framing for a small house and discovered the coping tool to cut intersection framing members - such as the rafter to ridge beam intersection. Easier than a reference plane if the two pieces actually intersect.
I miss your tutorials Balkan Architect, I have been busy at work.
hey i just wanna say i love you!! doing great things in revit because of you!
Thank you so much, you saved me once again for my school project T.T Whenever I have a problem I watch your videos and everything's good :D
Good idea putting the orange ball over the cursor, can follow now
I love you thank you so much for everything x
Back off he’s mine!
Great piece, joist placement, l learned. Can be applied perpendicularly. Thanks champ. 👍.. You're good.
Hi my friend. I hope you are doing well. I will buy the roofs course. Im learning a lot with you and Im going to new levels of quality here. Thank you!
I sometimes make seams with a railing tool with profile 20x40mm. It's a good way, if the distance between seams should be different
That was a great demonstration
Very beautiful explanation 👌
nice new look!
I like this tutorial, rich in information
hi. this video education was one of the best. thank youuuuuuuuuuuuuuuuuu
Nice video as always. Guys he shaved yeeeeeeeeeeh!
The ridge in your example is a RIDGE BOARD not a RIDGE BEAM, so you need to add a collar tie in the upper thirs point of the rafter length, on the other option it would be a RIDGE BEAM but you would need a post from ridge beam to your your joist.
In revit 2023 the notch tool will bevel the rafters to the ridge beam neatly and fast.
Works in 3d too
Sir please if possible to do video on lumion rendering
that was so use full! !
Great information, Thank you
Thanks for the video
nice ideas...Thanks be to God.
At 7:21, you had a nice 3D dhaded view with the walls and roof in white, and the wood in natural colour. Could I ask how you achieve this?
I would like to watch a modern facade video tutorial
THANK YOU!
thanks it was very useful
helpful tips thanks.
Amazing tutorial and you look so cute as cut your beard 😁😁
wonderful
amazing
Thanks!
Thanks, Balkan Architects for this opportunity to have me enroll for the Revit roofs master class, however, I have one request please avail me the videos and files that can open in Revit 2018
You Rock !
Hi, How can I change the Beam structure color and materials? Thank you and great tutorial!
How did you set up your graphics - the thick outlines look nice, also the fact that the wood displays in colour. I think you have ambient shadows - is that right?
graphic display options>silhouettes
Thank you for the video!!
Just got one question here, at 15:55 the rotation option is locked(cant but clicked) in my Revit, does anyone know why?
Buenisimo
Hi. I have a problem with revit where I draw a stair from 1st floor to second. and in first floor there is the cutline and above is in dotted lines. but from the second floor plan the stair is being shown fully. no cutmarks or dotted lines. just down arrow. is there anyway where i can show a cutmark in the second floor plan as well. adjusting view range doesnt do anygood.
It's meant to be shown in full since you can actually see the whole stairs from that level. It will only show those cut lines if the stairs passes through the cut range for that floor plan level.
Waiting for skirting by profile
hi can you please make video about dutch gable roofs
@19:16 can you tell me what key did you press when you rotate the whole structure??
Could you make a parametric truss rafter and use it as a beam system?
Did you ever treat the subject of layered roofs to get a element part roofs and model different layer lengths ? Cause in Revit roofs can't be exploded...very strange.
I have Revit 2021. Do your templates work for 2021?
I find using Revit like going to the dentist. "quite painful and not much fun".
where is the beard thooo
Too late