How To Repair Chain Link Fence
HTML-код
- Опубликовано: 4 сен 2024
- How to repair chain link fence -
Here's the link to the Ebook I wrote www.amazon.com...
Here are a couple of tools I have stumbled upon bit.ly/3QYtqOn - A Fountain that makes water from the air and bit.ly/40XH4WJ - A Solar Sphere that produces electricity - Check'em out!
Sir you made this look easy with very little tools first video I’ve seen like this 👍🏾
Thanks,.. I do hope it has helped out,.. thanks for viewing.
Very nicely done by a skilled craftsman.
Its glad that you get it and can profit from it. Thank you sir! This is what makes America great. Men who take a negative and make something positive out of it. I'm sure this goes on more so in some cities than others.
Thank you for keeping things simple. Big help!
You're welcome,.. thanks for viewing
Wanted to say I enjoy your videos . I've been building fence for almost 40 years. Mostly chain link. Don't really care to do wood fences. But I was gonna mention that if you don't know if your chain link will weave or work with an existing chAin link ,like in this video , just count the diamonds start at the top with a full diamond and count down. Usually it ll be anywhere between 18 -20 1/2 diamonds. Just so long as they're the same amount on both, they ll weave or work with each other. No problem. IDC if you're using 6 GA and trying to weave it with 12 1/2 ga itll work. Just as long as they have the same amount of diamonds. Hope that helps someone.
So true, thanks for leaving the tip
This guy is so real!! Love this guy! Very helpful and thank you for this video!
Awww,...thanks. That means a lot to me,..Keep smiling!
Saving us thousands thank you
Glad to have helped out,..
Awesome, thank you very much for sharing this.
You're welcome,..I am glad it helped,..I was a single camera man in action on the fence line that day. Had fun putting it all together too. Keep smiling!
Thank you for your response. You are saying that if posts were installed on a relatively even surface, they should not tilt more than they already do, correct? Thank you.
That is my assessment from your explanation,.. hope it all works out for the best, keep smiling and have a great day
Thanks for the video I really appreciate it!
Your welcome,..glad it helped out,..this was a fun one to edit,..
Yeah I have to fix a fence for one of my mowing customers. I got the mower stuck on the fence and it tore it all up LOL
@@jasonlawn4843 Wow,..I am sure you will be able to gett'er all fixed up. If you have any questions don't hesitate to ask. Thanks again
Absolutely will do thanks have a great night!
I have a fence repair question if you don't mind. I recently repaired a small section of fence in my backyard that was damaged by a tree fall. The fence is 5 foot tall and I was able to find 5' fence at my local Lowes. The fence I picked up is 11.5 gauge (I think) or it might be 11, I don't have the tag handy. Either way, it looks, to my untrained eye, like it is the same gauge as the existing fence. As I attempted to weave the new fence into the old, it wasn't lining up quite right. The links appear to be the same size and I was able to weave the splice in but once it was together, the top of the new fence doesn't line up with the existing fence. It is just a little higher. At first I thought it was because the ground was getting in the way, the old fence had been buried in the ground. But I had the ground cleared away from the old fence and I don't think it was impeding the new fence. Then I counted the links (the diamonds) in both fences and they weren't the same. I think the old fence had 18 diamonds from top to bottom and the new fence had 19. Those numbers may be off and I'd have to go back and count again to be sure but it was one off between the two. Hopefully I've adequately explained what I'm seeing and given you enough to diagnose the problem. Did I inadvertently buy a different gauge of fence? Is there some other explanation for what I'm seeing? Thanks in advance for any help.
One way to make sure the mesh is correct, measure the distance between the diamonds, they should measure the same 2" or 2-1/4". Another way to put the two together is by using a piece of smooth wire 9ga., I slide that down in between the diamonds, just make sure you have two full diamonds to stitch together. When you went to weave the first two together, did you have one diamond on one side of mesh and then one half of diamond on the other mesh to weave in one picket to make the two full diamonds, If you weave two full diamonds together then the top of the fabric will be at two different heights. I hope it helps,.. Merry Christmas
@@jwthefencer Thanks very much, that does help. I'll have to go back out and check what I did and maybe redo the weave. I thought I had one full diamond and one half but I honestly can't remember now. I will also measure the diamonds and compare. Thanks again for your help. I really did not expect a reply on Christmas day. 🙂 Merry Christmas to you too!
What do you charge for repair a fence similar to this repair?
A minimum fee of $525.00
Would that be easier if you laid the gate on the ground?😮
May be,.. it all depends on how you like getting the job done, I didn't want to take the gate off the hinges, I like working with it standing up, thanks for viewing,..
Hello,
I’d like to ask for your advice. I have a fence with 19 terminal posts in a straight line. The terminal posts are 2-3/8” inches and 6ft tall above the ground. They are embedded 24 inches down in concrete. Approximately 15 of these posts are not plumb. They are slightly not level. Approximately 5 degrees off. I have a top rail going. I have also a top rail bar that is tension banded between all of these posts. My worry is that over time the terminal posts will continue to tilt. Should I correct them now or is it not worth the effort? What kind of lifespan can I expect if they are going to continue to tilt? Thank you in advanced.
You could straighten them out now, why di the come out of plumb? Correcting the mistake now before the customer catches it and complains would be well worth the effort, the posts shouldn't tilt unless they were set on a slope,.. I hope this helps
Is it possible to splice a 11 gauge wire into a 10 gauge fence? Assuming they are both the same 1-3/4 size. Having a hard time finding a 10 gauge roll anywhere.
Wow,.. interesting. First time I have even heard of 10 ga. wire. mostly 9 ga. and 11 ga. wire. I do run into the 11-1/2" ga. wire so thin you could chew threw it. Best thing I could suggest is to get a few pickets of the 11 ga. and see if the 10 ga. and the 11ga. would weave together. Let me know how it goes. Thanks for viewing.
Would l9ve to know if it works
@@Lawless187indika Me too,..
where can i buy extra chain link straws?
Straws? Did I say straw's? Hmmm. My bad.
You should have taken an extra half diamond friend looks so loose
I did after I shut the video down,.. thanks for the input, keep smiling