Quality job as always 👍 bg boards are a game changer….Never understood why the hypervolt cardboard mounting template comes in a bag and the cover is just loose in the box have dropped one myself it goes straight in the front of the van now out of the danger zone until it’s fitted 😂
Thank you mate, I love the BG boards, yes that makes no sense!! I do the same, the cover goes away immediately, far to costly to replace!! Hope your well buddy
Hi, great looking job. Is using that box comparable in price to running back to the meter inside and using cable and trunking inside and 5 metres of external clipped cable?? I guess i am asking, was it a standard installation??
Great, I've just fitted one of these and struggled with 25mm tails, I found your video trying to find out if we could fit 16mm tails. Do you think an niceic or napit etc inspector would pull it, with it having 100amp fuse?
Hi SOTA, Great video as always I’m looking to plan my own install for my home charger.. Doncaster EV ultra 4mm is rated at 45A and 6mm at 59A. My question is your using 6mm is there any reason you are oversizing ? for this or it’s just what you have on the van. I’m due to do my EV course next few weeks and doing some pre reading etc After I complete my course wanted to install my own charger, was going to run 4mm Swa EV ULTRA as there a little bit of the run that I want hidden under ground. Appreciate any response and look forward to all your other content Thanks,
@@sotaelectrical I just done a webinar with my Energy this morning and they recommended using 40A protective device & 6mm to install a Zappi. It’s over sizes but it’s what the manufacturer wants. It make sense why I found it so hard to pick up 4mm on the day and they only seem to stock 6mm. Appreciate the reply I wanted to get into EV and install my own the right way. Thanks
Hi dose the ct clamp cable from meter cabinet go down the copex and join with the ev ultra cable inside c.u, is it just 2 cores and dose it matter what colour you use, I don't install ev charges just trying to get my head round it lol
The ct clamp goes in the meter box and is joined to a Cat 5 which goes down the copex which joins to the EV ultra cable if that makes sense? It is 2 cores and it does not really matter what colours you use
@@sotaelectrical so the cat 5 is in the ev cable you just stripped long enough so it passes through the c.u down the copex and into the junction box in meter cabinet
Just as some constructive feedback to help aid you on your youtube journey. The audio volume goes low and the high between you talking and you playing music. The mic audio is fine, but the music volume is higher. it means I have to turn the volume up just hear what you're saying and then turn it down so I don't wake the house up with the music audio... (2.12-2.15 is a perfect example of this.) As i said, constructive feedback, I mean no offence!
Thank you for the feedback, no offence taken, it’s a learning curve for me on the editing side so really appreciated. I will take more time on getting this right on the next video
Another super installation and great explanatory video. Adam - you're the best!
No Bob your awesome!
Quality job as always 👍 bg boards are a game changer….Never understood why the hypervolt cardboard mounting template comes in a bag and the cover is just loose in the box have dropped one myself it goes straight in the front of the van now out of the danger zone until it’s fitted 😂
Thank you mate, I love the BG boards, yes that makes no sense!! I do the same, the cover goes away immediately, far to costly to replace!! Hope your well buddy
I wish you could do mine in Nottingham to this standard!!
Very neat
Like the bg
Thank you, I really like the BG too!!
Top quality installation work. Thanks for sharing. What printer are you using for labels?
Thank you sir, the printer is just a cheap thing called a NIIMBOT I got from Amazon, Il show it on the next EV install video
Hi, great looking job. Is using that box comparable in price to running back to the meter inside and using cable and trunking inside and 5 metres of external clipped cable?? I guess i am asking, was it a standard installation??
Hi there, the Ohme manual states that type C should be used. I noticed that the EV consumer unit had type B. Can you clarify?
How much should i charge for an install like this ? thanks in advance
Great, I've just fitted one of these and struggled with 25mm tails, I found your video trying to find out if we could fit 16mm tails.
Do you think an niceic or napit etc inspector would pull it, with it having 100amp fuse?
You can fit 16mm tails no problem and won’t fail an inspection 👍👍
Hi SOTA, Great video as always I’m looking to plan my own install for my home charger.. Doncaster EV ultra 4mm is rated at 45A and 6mm at 59A. My question is your using 6mm is there any reason you are oversizing ? for this or it’s just what you have on the van.
I’m due to do my EV course next few weeks and doing some pre reading etc
After I complete my course wanted to install my own charger, was going to run 4mm Swa EV ULTRA as there a little bit of the run that I want hidden under ground.
Appreciate any response and look forward to all your other content
Thanks,
Hi mate, good luck with your course!! I always use 6mm because it’s just what I have on the van
@@sotaelectrical I just done a webinar with my Energy this morning and they recommended using 40A protective device & 6mm to install a Zappi. It’s over sizes but it’s what the manufacturer wants. It make sense why I found it so hard to pick up 4mm on the day and they only seem to stock 6mm.
Appreciate the reply I wanted to get into EV and install my own the right way.
Thanks
@@MattPasek did they say to install a 40A MCB or RCBO?
@@sotaelectrical A B40 RCBO (Double Pole) would suffice.
Message from Myenergy
Hi dose the ct clamp cable from meter cabinet go down the copex and join with the ev ultra cable inside c.u, is it just 2 cores and dose it matter what colour you use, I don't install ev charges just trying to get my head round it lol
The ct clamp goes in the meter box and is joined to a Cat 5 which goes down the copex which joins to the EV ultra cable if that makes sense? It is 2 cores and it does not really matter what colours you use
@@sotaelectrical so the cat 5 is in the ev cable you just stripped long enough so it passes through the c.u down the copex and into the junction box in meter cabinet
@@gd-bq7em the cat 5 is in the cable correct
Should have a rotary isolator
That only applies in Ireland, I’m not in Ireland 👍
Is the consumer unit lockable?
Yes
Just as some constructive feedback to help aid you on your youtube journey.
The audio volume goes low and the high between you talking and you playing music. The mic audio is fine, but the music volume is higher. it means I have to turn the volume up just hear what you're saying and then turn it down so I don't wake the house up with the music audio... (2.12-2.15 is a perfect example of this.)
As i said, constructive feedback, I mean no offence!
Thank you for the feedback, no offence taken, it’s a learning curve for me on the editing side so really appreciated. I will take more time on getting this right on the next video
U need to spray the meter box 🤣
🤣
I've seen 10 mm tails on some jobs for EV 😳