Not yet for video showing the measurement but we will make it next time soon. The scanner generates either STL or OBJ files. Yes, you can import it into Solidworks to continue its post application.
If you can see the scanned data but not after the mesh, it may have several possibilities. Usually after mesh, the incompleted scan area may not be able to finish as mesh data because of insufficient data. It happens sometimes at scanning large area. You may try to scan a smaller portion to see if the problem occurs for troubleshooting.
@@umax2639 Are you able to create a marker alignment on the entire car? I'm looking to see a closed loop of an entire car with a totally closed loop with demonstrable volumetric accuracy
We lost our demo Jeep at this moment so we can't do it now. However, you can see the demo video link from Shining3d below. You just need to fill out your info at the form and can view it. www.einscan.com/webinar-info/?id=51&t=3D-Scanning-The-Whole-Vehicle-Is-Simple:-Tips-For-3D-Scanning-The-T-cross-With-EinScan-HX Thanks!
![Summer Walker - Heart Of A Woman [Official Lyric Video]](http://i.ytimg.com/vi/SFddctbZzw8/mqdefault.jpg)
Thank you for the very concise & informative guide! I'm learning to use an Einscan H, so not all of this is applicable to me, but lots is! Thank you.
Great to hear!
Do you have a video showing the measurements? Can you import into solidworks?
Not yet for video showing the measurement but we will make it next time soon.
The scanner generates either STL or OBJ files. Yes, you can import it into Solidworks to continue its post application.
@@umax2639 thank you
hi i want to ask you is the einscan support for windows 11 (the latest windows)?
Yes. EinScan works for Windows 11.
As I speak portuguese is It possible to get the written text of this video in English this will enable me to make a transtation.
Yes we can help. Allow us some time to prepare the info. We've received your email too, so we will email you the English text later. Thank you!
Great thanks.
Already emailed you.
If the blue mesh does not show up whats wrong?
If you can see the scanned data but not after the mesh, it may have several possibilities. Usually after mesh, the incompleted scan area may not be able to finish as mesh data because of insufficient data. It happens sometimes at scanning large area. You may try to scan a smaller portion to see if the problem occurs for troubleshooting.
Have you scanned an entire car?
Not yet. We scanned a whole motorcycle before. It should scan the whole car by separating into several project files.
@@umax2639 Are you able to create a marker alignment on the entire car? I'm looking to see a closed loop of an entire car with a totally closed loop with demonstrable volumetric accuracy
We lost our demo Jeep at this moment so we can't do it now. However, you can see the demo video link from Shining3d below. You just need to fill out your info at the form and can view it.
www.einscan.com/webinar-info/?id=51&t=3D-Scanning-The-Whole-Vehicle-Is-Simple:-Tips-For-3D-Scanning-The-T-cross-With-EinScan-HX
Thanks!