![UMAX](/img/default-banner.jpg)
- Видео 40
- Просмотров 155 933
UMAX
США
Добавлен 9 сен 2021
Shining 3D FreeScan Combo+ 3D Scanner live demo and introduction from UMAX
UMAX.com --- FreeScan Combo+ Mretology grade 3d scanner live demo
Просмотров: 25
Видео
When UMAX meets the FreeScan Trio 3D Scanner
Просмотров 138Месяц назад
UMAX.com | A live demo for operating the FreeScan Trio 3d scanner
FreeScan UE Pro 3D Scanner Hits the Weights
Просмотров 722 месяца назад
UMAX.com - One example for scanning a large object with FreeScan UE Pro 3d scanner
When UMAX meets FreeScan UE Pro 3D Scanner - Introduction
Просмотров 1562 месяца назад
FreeScan UE Pro 3D scanner is a professional, well rounded tool for scanning from small to large objects. This is an introduction for this model. UMAX.com
3D Scanning for Animation
Просмотров 782 месяца назад
Retopology Special from Shining3d EinScan 3D Scanners
Shining3d FreeScan Combo 3D Scanning for Reverse Engineering in Design X
Просмотров 1743 месяца назад
Here we show you how we used FreeScan Combo to 3d scan a flywheel. We used this scan data to Reverse Engineer into a CAD model in our other video. To see the detail how we reverse engineered, please see the link below: ruclips.net/video/OVlKnOUhnik/видео.html
Geomagic Design X - Full details - Reverse Engineering from FreeScan Combo 3D Scanner - UMAX.com
Просмотров 1493 месяца назад
We show you how to convert a mesh data to CAD model in Geomagic Design X step by step. A great source to learn!
Reverse Engineering with FreeScan Combo 3D Scanner | Geomagic Design X
Просмотров 1184 месяца назад
Best Reverse Engineering Solution - UMAX.com - Geomagic Design X - 3D Scanner - Freescan Combo
FreeScan Combo 3D Scanner and 2024 Total Solar Eclipse Special
Просмотров 1164 месяца назад
2024 Total Solar Eclipse on April 8, 2024 - - - www.umax.com
FreeScan Combo Multifunctional Metrology 3D Scanner - Introduction
Просмотров 1,1 тыс.5 месяцев назад
Please place your order from UMAX.com !! This is a very detailed introduction video for FreeScan Combo Multifunctional Metrology 3D Scanner including a quick live demo.
FreeScan Combo 3D Scanner - Live Demo of Laser Mode
Просмотров 3406 месяцев назад
A detailed live demo for Freescan Combo Hybrid Light Source 3D Scanner. Light Source: Blue Laser Infrared VCSEL Accuracy: Up to 0.02 mm Weight: 620g Compact Size: 193mm x 63mm x53mm For order, please contact info@umax.com
EinScan HX 3D Scanner Live Demo - Rapid Scan mode
Просмотров 5306 месяцев назад
A detailed example of EinScan HX 3D scanner Live Demo in Rapid Scan mode. Any sales question, please contact info@umax.com
EinScan HX 3D Handheld Scanner Live Demo - Laser mode
Просмотров 4536 месяцев назад
A great example of how to operate your HX scanner with Laser mode. Purchase your EinScan HX 3d scanner at UMAX.com
How to scan smaller objects with Einstar 3d scanner for better result?
Просмотров 3,8 тыс.7 месяцев назад
Deep dive to explain how to use Einstar 3d scanner to scan small items for better result. To order umax.com/einstar-3d-scanner
Can Einstar 3D Scanner Scan Small Objects?
Просмотров 1,1 тыс.7 месяцев назад
Can Einstar 3D Scanner Scan Small Objects?
Do you really know when you should calibrate your Einstar 3D scanner?
Просмотров 2817 месяцев назад
Do you really know when you should calibrate your Einstar 3D scanner?
Einstar and EinScan SP v2 3D Scanner Bundle
Просмотров 7438 месяцев назад
Einstar and EinScan SP v2 3D Scanner Bundle
Einstar 3D Scanner vs Phone App Scanner | UMAX.COM
Просмотров 8558 месяцев назад
Einstar 3D Scanner vs Phone App Scanner | UMAX.COM
EinScan H2 Handheld 3D Scanner - Detailed Introduction & Demonstration | UMAX.COM
Просмотров 1,3 тыс.8 месяцев назад
EinScan H2 Handheld 3D Scanner - Detailed Introduction & Demonstration | UMAX.COM
Reverse Engineering Demo with EinScan HX 3D Scanner, Geomagic Essentials and Solid Edge software
Просмотров 2,1 тыс.Год назад
Reverse Engineering Demo with EinScan HX 3D Scanner, Geomagic Essentials and Solid Edge software
Demonstration of how to scan small objects from EinScan Pro HD Handheld 3D Scanner
Просмотров 885Год назад
Demonstration of how to scan small objects from EinScan Pro HD Handheld 3D Scanner
Einscan HX Hybrid Blue Laser & LED Light Handheld 3D Scanner Training Guide
Просмотров 1,1 тыс.Год назад
Einscan HX Hybrid Blue Laser & LED Light Handheld 3D Scanner Training Guide
How To Pick Your 3D Scanner ? | UMAX.com
Просмотров 2,1 тыс.Год назад
How To Pick Your 3D Scanner ? | UMAX.com
Einstar 3D Scanner Troubleshooting Guide - Must See! - UMAX.com
Просмотров 9 тыс.Год назад
Einstar 3D Scanner Troubleshooting Guide - Must See! - UMAX.com
Einscan Pro HD 3D Scanner Training Guide: Fixed Scan | UMAX.com
Просмотров 3,2 тыс.Год назад
Einscan Pro HD 3D Scanner Training Guide: Fixed Scan | UMAX.com
Einscan Pro HD Multi functional 3D Scanner Training Guide - Handheld mode | UMAX.COM
Просмотров 1,9 тыс.Год назад
Einscan Pro HD Multi functional 3D Scanner Training Guide - Handheld mode | UMAX.COM
Einscan HX 3D Scanner Detailed Guide | UMAX.com
Просмотров 7 тыс.Год назад
Einscan HX 3D Scanner Detailed Guide | UMAX.com
Is it true that Shining 3d will not play nice with AMD Radeon based graphics? if so, I will have to consider Creality Otter. I can not seem to find any definitive certainty on this subject, no responce from Shining 3d as of yet. Not sure how to expect the customer support or information inquiries from the company.
Yes it is true that all Shining3d's products are designed based on Intel CPU with Nvidia graphics chips because of its engineering structure.
Nice ! Thank you very much for the video. Is it much better than the first version? Thanks
Yes, the scanning speed is 8 times faster and the data's dense integrity is better.
Very helpful, but you really need to speak up. A bit soft.
Thanks for your advice!
I just bought this scanner and have scan small object well and have been really impressed with it but I bought with intent to scan some larger object such as the side of my boat (less than 10ft) to get the decals. I have large object and low res select but the scan has no color, the decals cannot be seen, is it because i selected large object with low res? Any reason I cannot scan constrasting colors?
Would you make sure you select "color" or "texture" setting at the beginning? For large object, you may need to separate into 2 or 3 projects, and then you can combine them. If you need more help, please contact us directly at info@umax.com
u guys always say "look at the link in the desc", but then not put a link in the desc, smh...
We used to put the links there but the manufacture changes it from time to time, so we removed it after all. However if you are interested in any info, please let us know and we can put a new link for you.
Well done!
Michael Bolton ?
Please can you do a video where you showcase each scanning option and explain the difference between each of them? I’m having a hard time understanding each of them and how to combine together depending on the part I’m trying to scan 🙏
Sure we can create another video later. In the meantime, you may see one other video below. It has detailed explanation for each feature. ruclips.net/video/eTjd85uRcJ4/видео.html
I’m unable to select objects mode it is stuck on portait mode and can’t any options what should do?
Hi, can you restart the Exscan software and select Object mode from the beginning?
@@umax2639 🙏🙏🙏🙏🙏🙏
Awesome
Very well done! Thank you :)
How good is it for facial expression scanning?
You can watch our other video below: ruclips.net/video/djz6K2zXjxI/видео.html At 3:40, you can see the good facial scanned result there. Thanks!
That is amazing! Great presentation!
My boss bought this and had me learn this how to use this so I can teach him. I've not an idea on how to save what I scanned so that's why I'm here
Hi, at this video of 7:49, you will see the right tool bar. After you finish the scan, you will continue to click on "mesh" button. After that, you can click on "Save" button which is the top second button on the right side tool bar. It will save as STL format which is very standard in the industry.
Why my 3d scanner out notice “not enough features to align” ? What does it mean?
It means the scanner can't recognize the object at this moment. It can be several reasons below: 1, The object has many flat area without markers so the scanner can't recognize it. In this case, you will need to put some markers on the object. 2. The setting between the object & scanner may not be good enough. Like the brightness, distance,..
why when I calibrate white balance does my 3D scanner doestn’t work? But when i calibrate step 1 - step 5 it’s work?
White balance is for the scanner with Color camera only. When your scanner is attached the Color camera, you will redo the whole calibration. You can't simply do white balance alone. You will start from step 1~5 and then white balance in order to complete the whole calibration process.
how do you prevent the scanner from scanning in the surface that your object is laying on?
There are two ways: 1, you can use a black cloth as the surface that your object is laying on, usually if the brightness setting is not too low, the scanner won't capture the black cloth while you're scanning your object. 2, If the surface is not black color, you still can scan the object as usual and of course the scanner will capture the both object and the bottom surface. And then you can use "Cutting plan" tool to locate the unwanted surface and remove it. Cutting plan is a useful tool which you can find it from the bottom tool bar in the ExScan scanning software.
How do you CANCEL or STOP scanning process ? I dont see any button or anything
At the right side of your tool bar, you can find a Stop button. It's the second button from the top.
the #1 issue is its not registering the device without an account.
That's right. You will need to register a new Shining3d account first before you can activate the scanner.
Thank you! Awesome!
Glad you liked it!
Johnny - you are great
I just got mine today and so far I've been able to scan a rubber duck, a beer can (misted with alc and talc powder) and a crazy mask I made in grade 9 art 20+ years ago. The quality has exceeded my expectations. Plan on upgrading if you like lots of triangles. 7950x and 64gb, rtx4090. Need more ram.
Sounds good!
Great demo!
Gracias por el video un gran aporte
You are welcome!
You are talking many times in the video about links in the description for driver issues or other links, however you have no links in the description...
Hello, here is the link for the Einstar driver issue: support.einstar.com/support/solutions/articles/60000790760-einstar-continues-rebooting-in-device-manager Sorry we removed the link from the description later because the manufacture updated the URL support link from time to time. The link we posted a year ago is not valid anymore.
Excellent video thanks. I have just started to use my Einstar and am very impressed with it. I did however have a problem after scanning a part in my boat approx 1,5 metres long 1 metre tall. It scanned beautifully but when it came to the generating a point Cloud bit it hung up at 43% and I lost all the data by having to shut down. I think the file size was too big . Is there a way of telling that your file is getting too big? Can you split the project at this stage and generate several smaller point clouds to merge later? Any help appreciated Thanks P.S. my laptop meets all the specs advised .
Hello, Thanks for your message! If the computer crashed, you still can restart your computer and open your previous project file to resume your original project. After you open the original project, you can continue to create Point cloud. In addition, for scanning large object, you can split into 2~3 projects and align them together later. But make sure you have enough common (overlap) area in between each project. Best regards
@@umax2639 many thanks I’ll have another go !
My exscan won't let me do any post processing
Hello, You will first need to click on "Optimize to point cloud" button on the right side of your tool bar. When you still in the scanning stage, it's the raw data. You need to change it to point cloud data, and then you can move to post processing (to become mesh data).
"press this button" at 6:50 was off the screen.
Yes. You are right! He pressed the "Alignment" button on the right side tool bar of the screen. We didn't realize the right side toolbar wasn't filmed at that time.
Great video! question though, my scanner shows blue lights when it's not connected to my laptop. However, when i connect the wire to my laptop, the bottom LED immediately turns red and the device begins connecting and disconnecting. The shining 3D EXstar will not recognize the scanner either, it just shows online. Please help!
Hello, you can power off the scanner and power it back on to try again. In the meantime, temporarily disable your anti-virus or security software in your computer. Also make sure you plug it into your USB 3 port in your computer.
@@umax2639 awesome, thank u so much!
Awesome presentation!!!!!
Thank you! Cheers!
Thanks for the video. That music though 😢
You're welcome!
Will the Einstar utilise marker dots for better tracking on large flat surfaces?
Yes that's right. For big flat surface area, it's essential to apply some markers so the scanner can capture these data. When you scan with marker alignment, the scanner usually has better accuracy. Each scan shot from scanner needs to see at least 4 makers a time. Each marker should be about 1~2 inch apart each other.
I really do not like videos like this. I was hoping for a indepth exploration on how to scan small objects in the best quality, but not only was the highest quality option not selected for this, it was also not fused with the highest option and had all sorts of end result altering settings on, as well as never showing the low poly scan without texture. I can only imagine, with those settings, and how poor quality the texture was, that the underlying mesh geometry wouldn't be very high quality. This was a video to really show the capabilities of the scanner - with the small object 0.1mm setting with the best fuse settings, etc., but no. I'm beginning to think this scanner cannot do small scale high res scanning, as these videos NEVER show it, so it's really put me off this particular scanner.
Einstar scanner basically was designed to scan from at least 5 inches size and up. The purpose of this video is to show one of workarounds to scan smaller object like 2 inches. If you wish to scan small object (1 inch~5 inches) with very high quality like 0.05mm accuracy, 0.1mm resolution, it should be EinScan SP scanner.
Great video. Thanks
Glad you liked it!
Is it possible to continue to scan in a previous project once a new one has been created? Say i want to go back the initial scan?
Awesome presentation! Thank you. Easy to understand.
Glad you enjoyed it!
hi i want to ask you is the einscan support for windows 11 (the latest windows)?
Awesome presentation!!!! Thank you! Well done.
good to know, i ll keep the Einstar 😅
you know you're asking us to click buttons that are off the screen, right
For the video from time 6:44, he's doing alignment. He aligned two different scanned data/projects into one image. Usually if there are some common area between these two scanned data, the software can automatically align them together into one piece or you can manually align them too. In this video, he clicked on the "Manuel Alignment" button on the top second left corner which you can see it from the screen.
Guillermo de la Cruz!
great scan!
Do you have a video showing the measurements? Can you import into solidworks?
@@umax2639 thank you
Great presentation! Thank you!
Glad it was helpful!
Thank you. Well done!
Wow! That is amazing and fun to see how the scanning works. Well done! Thank you :)
Good looking man with a great voice. Easy to understand his presentation. Thank you for helpful tips on how to use the device & markers. He makes it fun to learn about scanning.
Glad it was helpful!
How do you save as stl.. on my save settings only .asc show up as option... thx
You will need to finish "Mesh" process within Einstar software and then you can save data as stl. In mesh process, you can choose either watertight or unwatertight.
When HX2 will become available? H was already updated with H2.
Currently HX is very active. There is no HX2 so far.
what do you expect from the update, if there will be HX2?
Laser scan without markers. More layer lines. Higher texture resolution.