Freekin love my Apache's. I'm running 4 now and just can't fault them. Just love no more tappet return spring. Is amazing how some people still Just refuse to believe they actually work so well
Love your work bro, i have been so bizy with other stuff that i haven't been able to do anything recently and probably won't get to finish anything up till the new year 🤬 but i will probably pull one out on Christmas day and give them a blat lol i still got my my new honey badger sitting in the box untouched and my sdu falkor blitz is still sitting in the box aswell so they need a test and i got a acetech blaster for the falkor 😁
Yes this uses an Apache. I only run it in this gun as it does require more tuning than a traditional tappet. And on this 1200 man 11.1 it's about 45rps
what FPS should I be getting with at M160? With .20g BB i’m get around 335 FPS with A SHS DSG. Seem kind of low and when putting spring guide spacer my FPS actually drops. Which I thought was strange. Does your BB curve left or right with the Tappless? Before I upgrade to tappless BB’s was shoot straight.
I wouldn't because of the value in it being a limited edition mp5 and the fact it's the only gun I have using the Apache. But total cost to build this would be around 700 usd.
In your opinion what's the best brushless motor because I'm doing a 65 ish rps build using 18:1 dsg and 52k warhead but is there a better option for the motor because I haven't ordered it I've ordered most of the parts just not sure on the motor yet, I'm going to be using a gate titan or gate aster also like all aztech parts with 11.1v 50c
Titan sucks with brushless and asters are meh. Best semi brushless would be the t238 because it has a lower soft start time than warhead, most efficient would be warhead because of the parallel wrapping. 50c battery might cause pme issues with 45k or faster unless u let using a big spring.
@JHQ TECH Hey, I'm sorry to keep bothering you, but I have the titan in my gun, and I have an aster I can switch it out for, but I also noticed on t238 website it says specifically it is not compatible with any other etu. So I was thinking I can go with the base 45k but I'm unsure if there is a huge performance drop between the cnc and base, if so worst comes to worst I'll go with the cnc 36k because I'm really thriving for the 65 rps area. Sorry and thanks for the help.
@@Lucas-olsen-racing t238 motor works fine with any mosfet just have to disable ab. Theres no real difference in performance between the black and base warheads. 45k should net 60ish rps just fine.
@JHQ TECH thanks so much for the help and for taking your time to respond quickly it helps me out so so much. Edit: I'm going to go with the 45k and take the aster out of my other gun and put it in this gun.
I prefer normal aegs. Systema is nice for the fps cylinder swaps and realism, but I can make any aeg perform just as good, if not better for a fraction of the price. And breaking anything in a systema is usually a expensive hard to find replacement.
Is there anyway you can build me a dsg I will buy all the parts and I’ll buy the gun I just need a good tech bc where I live there’s no good techs I love your videos man hopefully you see this and can help me out and you could also make a vid out of it thank you man much love 🫶🏻
Sounds crispy as hell 🤟🏻 Great job and great gameplay mate 💪
Thank you that means alot coming from your builds. Just wait for my mws video it's a nod to yours.
@@jhqtech Looking forward to 😎
Freekin love my Apache's. I'm running 4 now and just can't fault them. Just love no more tappet return spring.
Is amazing how some people still Just refuse to believe they actually work so well
Do you have to have pre-cock enabled for Apache to work? I've heard the nozzle doesn't rectract back unless you have pre-cocking on.
@@Zhousansou no not at all. Apache is activated by the piston moving forward. Nothing to do with pre cocking
About to order the mp5k variant of this myself, as always flawless build🔥
Love your work bro, i have been so bizy with other stuff that i haven't been able to do anything recently and probably won't get to finish anything up till the new year 🤬 but i will probably pull one out on Christmas day and give them a blat lol i still got my my new honey badger sitting in the box untouched and my sdu falkor blitz is still sitting in the box aswell so they need a test and i got a acetech blaster for the falkor 😁
5:30 i felt that jump scare 😱
I always feel like a giddy kid when I get to play
Sweet setup! Go the APACHE!
great video !
Ay Dm me I have some questions about the tappetless nozzle , I just installed mine and the tuning videos I found suck!!!
Have you found any remedies to the FPS loss from the Apache’s?
Bigger spring, tighter barrel. I run this at 1j so it's not to hard
Is that with the Apache?? Apart from one gun all of mine run a Apache I love em. What's the RPS bro ?
Yes this uses an Apache. I only run it in this gun as it does require more tuning than a traditional tappet. And on this 1200 man 11.1 it's about 45rps
I asked for MP5 for mass. can you tell me what upgrades to do first or what you did to yours?
Are you using the sorbo pad that comes with the cylinder? Losing some FPS and thinking of taking it out but metal on metal is my concern.
Use a thinner sorbo and spacer behind the piston head. I wouldn't recommend metal on metal impacting
what FPS should I be getting with at M160? With .20g BB i’m get around 335 FPS with A SHS DSG. Seem kind of low and when putting spring guide spacer my FPS actually drops. Which I thought was strange. Does your BB curve left or right with the Tappless? Before I upgrade to tappless BB’s was shoot straight.
whars it like at range?
Out of pure curiosity. If you were to sell this MP5, how much would it be? Thank you.
I wouldn't because of the value in it being a limited edition mp5 and the fact it's the only gun I have using the Apache. But total cost to build this would be around 700 usd.
hey man, just wanna get your thoughts on the half shell shimming method. is it viable or are there better methods?
In your opinion what's the best brushless motor because I'm doing a 65 ish rps build using 18:1 dsg and 52k warhead but is there a better option for the motor because I haven't ordered it I've ordered most of the parts just not sure on the motor yet, I'm going to be using a gate titan or gate aster also like all aztech parts with 11.1v 50c
Titan sucks with brushless and asters are meh. Best semi brushless would be the t238 because it has a lower soft start time than warhead, most efficient would be warhead because of the parallel wrapping. 50c battery might cause pme issues with 45k or faster unless u let using a big spring.
@JHQ TECH Hey, I'm sorry to keep bothering you, but I have the titan in my gun, and I have an aster I can switch it out for, but I also noticed on t238 website it says specifically it is not compatible with any other etu. So I was thinking I can go with the base 45k but I'm unsure if there is a huge performance drop between the cnc and base, if so worst comes to worst I'll go with the cnc 36k because I'm really thriving for the 65 rps area. Sorry and thanks for the help.
@@Lucas-olsen-racing t238 motor works fine with any mosfet just have to disable ab. Theres no real difference in performance between the black and base warheads. 45k should net 60ish rps just fine.
@JHQ TECH thanks so much for the help and for taking your time to respond quickly it helps me out so so much. Edit: I'm going to go with the 45k and take the aster out of my other gun and put it in this gun.
Hey again sorry for bothering you but I just was wondering if it would be better if I went 16:1 with warhead 36k? For 65 rps. Thanks again
I still why Apache tappetless cylinderhead won't work for me
Is your cylinder head flat or bulgin
Hey dude, question as you have experience with both and you're a tech - systema vs normal aeg, which do you prefer and why?
I prefer normal aegs. Systema is nice for the fps cylinder swaps and realism, but I can make any aeg perform just as good, if not better for a fraction of the price. And breaking anything in a systema is usually a expensive hard to find replacement.
@@jhqtech Very fair. Thank you for the reply dude, much appreciated
Are you using the stock gearbox shell? Also what length nozzle works for mp5?
I would also like to know bec imma get a tm mp5
Stock gb I wanted the limited edition numbering. I'm using the adjustable nozzle
Is there anyway you can build me a dsg I will buy all the parts and I’ll buy the gun I just need a good tech bc where I live there’s no good techs I love your videos man hopefully you see this and can help me out and you could also make a vid out of it thank you man much love 🫶🏻
What mosfet?
Perun hybrid
Hey dude what spring are u using also what length nozzle are u using for the tappetless