The author does like to ruclips.net/user/postUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz from scratch, shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practice the full stack project, is still great.
I love designing and building stuff that is functional and fits perfectly where I need it to. And if it looks great where it's sitting, bonus! Nice build!!
Great little project. I loved it when you were hammering in the tacks to hold the leather in place, at 8:10 your Apple Watch said that the decibels were now too high. I need one of these. Bugger standing up to put my boots on and off. 👍🏻
I like when you use your Shopbot. I've had mine for 16 years. You should consider getting an "Indexer" so you can make spiral works of art. I'll teach you how to make a "left handed spiral inside of a hollow right handed spiral" if you want!
Excelente proyecto muy bien desarrollado y mejor ejecutado maestro, unos bancos/zapateros muy originales y peculiares,como casi todo lo que usted hace, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓😜
I'm curious if you've seen any of your CNC projects like this with the "tab & slot" construction method loosen over time with use if glue isn't used? For my job I have been thinking of making a system of interchangeable parts that would allow reconfiguration, so eliminating the glue up would be great...
So cool! Love when different disciples meet to make one project! Question: When you pressed the words into the leather, did you know that you were going to go deeper around the Carolina, or did you decide that after?
Hey Jimmy -- do you and Andrew Camarata ever hook up? You live so close together, and especially when it comes to road building it seems like maybe a natural collaboration
www.carolinashoe.com please support my sponsors! Happy Thanksgiving
The author does like to ruclips.net/user/postUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz from scratch, shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practice the full stack project, is still great.
Am I the only one to notice that guitar ? Hope to see the build of that. Love you Jim for keeping us inspired
First time in probably a year that RUclips recommended a video from him. (Glad he's not dead)
I love designing and building stuff that is functional and fits perfectly where I need it to. And if it looks great where it's sitting, bonus! Nice build!!
Looks just like the ones they used to have at the shoe stores. All you need is one of those metal foot measuring devices. LOL
I hope you're having a good holiday weekend. Thanks for posting, and thumbs up!
Beautiful project
Awesome idea
Worked some summers and holidays at Carolina Shoe factory in NC, way back when most or all were made in the US.
Its hard to beat a leather and wood project.
Love those slip-on workboots, Jimmy. Good stuff. The bench is great.
Always nice to see Jimmy use leather in a project. Ther's just something to it, that makes whatever you make with it look cool.
ASMR of woodworking 🤤
Lovely how 21st century technology gives such reproducible precision, such a blessing to be alive now. Thank you for sharing!
sharp looking accessory Jimmy D
Jimmy that looks awesome!!!
The Jack-of-all-Trades strikes again!!
Great bench Jimmy
Nice simple stools that anyone could build with a few good tips thrown in. Really like the embossed lettering on the leather here. Thanks for sharing!
Love this build. The leather is classy and rugged.
No Diresta Signature
I was kinda waiting for that. :)
Great little project.
I loved it when you were hammering in the tacks to hold the leather in place, at 8:10 your Apple Watch said that the decibels were now too high.
I need one of these. Bugger standing up to put my boots on and off. 👍🏻
Great benches.
I wish I could get into that CNC aesthetic. Craft fairs would be more enjoyable.
Hi Jimmy, Happy Thanksgiving! Hope you had a good one. Thanks for the video!
Very nice job Jimmy. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Keep making. God bless
So cool!
To help pull my boots on, I use a radiator hose hook with a molded handle.... this all looks awesome !!
Very nice! 👍
Amazing, Jimmy! Beautiful work!!! 😃
Stay safe there with your family! 🖖😊
That CNC router just seems like magic. And I loved the dust collector introduction. Happy Turkey Day!
Looks like you might need a sock sponsor too. It's a cool video happy Thanksgiving
That bench with the [DIRESTA] logo laser engraved on a slight angle would make a great flatpack kit!
I like when you use your Shopbot. I've had mine for 16 years. You should consider getting an "Indexer" so you can make spiral works of art. I'll teach you how to make a "left handed spiral inside of a hollow right handed spiral" if you want!
Excelente proyecto muy bien desarrollado y mejor ejecutado maestro, unos bancos/zapateros muy originales y peculiares,como casi todo lo que usted hace, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓😜
this might be the first thing you have ever built, that i have seen at least, with no "DIRESTA" logo on it :D
Bellissimo lavoro Jimmy
Happy thanksgiving 🍁
Wow. Nice work and nice equipment. Happy thanksgiving 👍
mais um belo trabalho Jimmy parabéns, vc transforma qualquer peça em única!!!!!
Pride can rob us of the best things that have ever happened to us.
Hope you had a great Thanksgiving! Loving this design and build!
👍👍👍👍👍👍👍👍Happy Thanksgiving!!!
I see a Carolina Shoe Christmas gift on the way. Happy Thanksgiving!!!
Excellent job, beautiful work. Happy Thanksgiving Jimmy
I greatly enjoyed this video!
Hello Jimmy Diresta good job well done
Really nice work.
Wow. I fully expected his socks to have 'Diresta' embroidered on them.
Very nice 👌 Happy Thanksgiving Jimmy!!!
Good
I can't decide which I like better. Plain or with the leather upholstery? Oh well!!
muy buen trabajo jimmy!!!
The boot hook you used is one of those things I might be interested to see made.
There's a vid of it on his channel 😊
@@ericpedersen2760 I'll have to dig for it because I'd really love one because I have a very bad back. 😊
@@aricp9173 ruclips.net/video/VNR8ZyaLgr4/видео.html
😊✌️
I need to get something custom made by you bro. I just bought a house and I’m building a studio.
ShoeResta!
Show de bola meu amigo parabéns pelo seu trabalho ganhou mais um inscrito e deixo aquele like valeu👍🏻👍🏻💯💯🤝
¡Hermoso trabajo!
Love it
Hi Jimmy, I've been watching your channel since the beginning and I have one belief about you. Has anyone ever told you you're a genius?
thank...
I'm curious if you've seen any of your CNC projects like this with the "tab & slot" construction method loosen over time with use if glue isn't used? For my job I have been thinking of making a system of interchangeable parts that would allow reconfiguration, so eliminating the glue up would be great...
So cool! Love when different disciples meet to make one project! Question: When you pressed the words into the leather, did you know that you were going to go deeper around the Carolina, or did you decide that after?
Nice content. 😁
Just curious why not use glue in the joints for longevity.
(Please insert baby voice) Why didn't you case the leather when you were tooling it with the bevel tool?
Not that it matters it still looked great!
Hey Jimmy -- do you and Andrew Camarata ever hook up? You live so close together, and especially when it comes to road building it seems like maybe a natural collaboration
As usual, great work Jimmy! Happy Turkey Day to you & your family! 🦃🦃👍👍
Hi, friend! Would you tell me what kind of finish liquid do you use for leather things, you make?
Are you still using Easel for gcode, kinda looks like you used the box maker app to design this. Great little bench Jimmy.
👌🔥🔥
Great video as always....
Don't you check for spiders before putting your boots on 😮🤔😁
Good afternoon. Can you upload a file with a CNC stand?
👍👍👍👍
how good would a palm nailer work for that leather tool??
Cutting hand ,when?
You did not sign them??? :)
Talk to your lawyer Jimmy, you should not have this " no diresta brand" paragraph in the sponser contract!! :)
What happened to the Rolex?
1,9m subscribers, 86k views ... What is the problèm. Diresta does a good job though?
What brand of 🥾 boots are those?
ditto
Longest commercial I’ve ever watched.
Cnc? That is not carpentry.
All that Cnc computer machine garbage lol what happened to the real diresta making it real also abom 90% showing machines who cares end of an era
SWEEEEEEEEEEEEEEET…
Atleast a little better soundtrack. Not that random pile of noises
👍👍👍👍👍👍