Manny Lopez If you’re looking for a turbo kit the one in this video is available! If you check my other videos I built a new motor for it, the turbo kit wasn’t big enough.
Manny Lopez turbo is maxed out around 850 horse power. The headers for the on3 kit aren’t big enough and cover 1/2 the ports on the AFR renegade heads I put on the new motor. That motor is capable of around 1200 hp at the crank
I think that should be fairly achievable, I had several different set ups on that car at the time, I think this was my stock motor with an e cam and professional products intake. 372whp 436tq. I ended up eventually upgrading to a TRE performance 306 with victor Jr heads. I ran a f303 cam and 76mm ball bearing turbo. The car made 436/529 wheel at 11 and 522/604 at 16psi
@@NaterTator11 I’d like to make around 450-475 rwhp on a 100% stock longblock. I don’t need it to last, I only need it to make one or more 10.99 or faster passes down the 1/4 before it dies. My goal is to break into the 10s with the stock longblock and T-5 if I can.
@@GyroPyro121212 you’ll need some good head gaskets and luck on your side. As for the t-5 I made one single street hit with 436/529 and the trans exploded. No prep. I think they are good to 300ft lbs at the crank. Will definitely be your weak link
from what I can tell its RPM that actually kills these motors once you start getting into higher hp keep it under 6200 and you should he okay to about 550-600
+Nathan Sypnieski i had my done with the on3 turbo and makes 436 hp and 398 ftlbs at 8.5 lbs boost. With a n41 n/a cam... I need the b41 cam, its a turbo cam...
my 94 gt needs to sound like this with a little more turbo spool. instantly fell in love!!!
Manny Lopez If you’re looking for a turbo kit the one in this video is available! If you check my other videos I built a new motor for it, the turbo kit wasn’t big enough.
@@NaterTator11 thats a first lmaooo, a 76 mm turbo not big enough for the engine!!!
Manny Lopez turbo is maxed out around 850 horse power. The headers for the on3 kit aren’t big enough and cover 1/2 the ports on the AFR renegade heads I put on the new motor. That motor is capable of around 1200 hp at the crank
@@NaterTator11 i think i just nutted in my pants honestly lmaoo
@@NaterTator11 you don't happen to have this kit still do ya? can't find em anywhere lol
Specs on the engine? I have a stock longblock and I’m looking to achieve similar performance with the On3 kit.
I think that should be fairly achievable, I had several different set ups on that car at the time, I think this was my stock motor with an e cam and professional products intake. 372whp 436tq. I ended up eventually upgrading to a TRE performance 306 with victor Jr heads. I ran a f303 cam and 76mm ball bearing turbo. The car made 436/529 wheel at 11 and 522/604 at 16psi
@@NaterTator11 I’d like to make around 450-475 rwhp on a 100% stock longblock. I don’t need it to last, I only need it to make one or more 10.99 or faster passes down the 1/4 before it dies. My goal is to break into the 10s with the stock longblock and T-5 if I can.
@@GyroPyro121212 you’ll need some good head gaskets and luck on your side. As for the t-5 I made one single street hit with 436/529 and the trans exploded. No prep. I think they are good to 300ft lbs at the crank. Will definitely be your weak link
@@NaterTator11 Yea, I’m gonna be running on hopes and dreams lol.
Hey man! Did you install this kit yourself or did a shop install it? Just wanted to get a roundabout price for an install. Thanks in advance
Jordan Boykin I installed it myself. Takes a lot of work but isn’t bad
how is the motor holding up in this car? I have a fox and was always interested in boosting just scared of the stock block limits
motor is holding great. just added heads waiting on a new tune
H2PROz fox bodys have forged internals from the factory they can handle 500 hp
from what I can tell its RPM that actually kills these motors once you start getting into higher hp keep it under 6200 and you should he okay to about 550-600
Whats the new hp#s
This video 373hp 436tq
+Nathan Sypnieski i had my done with the on3 turbo and makes 436 hp and 398 ftlbs at 8.5 lbs boost. With a n41 n/a cam... I need the b41 cam, its a turbo cam...
Automatic?
Fernando Sierra t5 manual