👉 If you enjoyed this content, please consider leaving a tip! It helps a lot! :) Tip via PayPal: bit.ly/3EA04xP 🏅 New! Become a member of the AviationPro channel & unlock extra perks! ruclips.net/channel/UCeAbVr5nEFwtYnEY42dIuuAjoin 👉 Check out my brand new Boeing 777 Cold & Dark Startup Tutorial!! ruclips.net/video/RFLDLO3Hipg/видео.html
Very well done, I think. Thank you for spending a bit of time explaining not just the "how", but the why of the steps you follow. It is, for the "technical" simmer, a great help. Thank you for taking the time to do it right! Technical accuracy is, for me, very important. I find that I have a few consistent problems--especially with programming the FMC! This helped me.
Very well done...I think the average sim hobbyist would find this very informative and easy to understand. Performance is likely the least understood and you explained it very well...
This is indeed a superb and wonderful video tutorial that so many of us wanted to see. Your training and delivery is amazing and I've learnt so much from watching and studying your video and training materials on both the 737 and 747. I'm very new to. B747, and this video just linked both bridges between the 737 and 747 training that I was after. You perfectly described to us in great detail the important functions and procedures needed for us to enjoy this superb and beautiful majestic 747 aircraft. Thank you so much and please continue to produce such fine and superb quality training videos, I personally appreciate it very much, as I'm sure everyone else does. thank you so much
One tip at 28:52 don't turn on the switches to run until the n2 rotaion is at 20% or you will do a hot start and damage the engines, overall very nice tutorial
I like a lot your video. It is quite complicated to go all the features to get a 747 in the air.I fly always small plane like Cessna C172, 185, ... I learn a lot watching your video. Thank you and continue the good work. Guy
@@AviationPro In most FMC tutorials, they just insert zfw, gross wt. But don't add & distribute wt. Of passengers & passengers in different classes. ... is what u did represents what pilots do in real flights???? If yes, then u have to upload VC about a detailed FMC functions...
Thank you ever so much , I am still getting to grips with fully programming the FMC , I never do Cold & Dark starts but this will prompt me to have a go ! Very nice video , keep up the hard work :)
Ali Kazemi 747 is één van de mooiste kisten die nog vliegt. De nieuwe generatie kisten zoals de dreamliner zijn ook mooi natuurlijk. Hopen dat daar ook ooit de pmdg versie van uit komt
Goed moment om zo'n video te maken ;) Misschien is het wel een goed idee om een video te maken over fuel management in de 74, aangezien dat toch wel anders is dan op de meeste andere vliegtuigen! :D
Thank you for this I found this video the most useful on the internet, going from airbus a320 to 747 i have A LOT more to learn. I am now at the stage of where the video finished so could i request a tutorial on pre flight, after take off, descent and landing for 747 just so i know I am doing everything right. I will continue to read the manual for now. Thanks again. EDIT: Just seen your EHAM - EDDL video and again great help. will try my own flight now. Cheers
Great video. Was going to leave the 747v3 because of the cost, but.........you should be being paid by PMDG. Remember, not too speedy, for the older learners! Many thanks!
Thank you! That's a nice compliment ;) I'll do my best, you can always use the pause button and repeat a segment if you'd like. I also have chapters in the description to make it easier to review a portion of the video again ;)
Yes I know, I did that for video length because I wanted to show the actual startup procedure instead of all the other stuff that would still come next to it.
Nice video bro! You should consider a career in aviation, you've got the passion and skills ;) Is that something you are looking at? Happy flying mate and Hi from Down Under (Australia) !
Nice video, subbed. Just bought the 747 and i have no idea how it works. So it looks like your tuorial is the way to go, will watch it tonight while trying to get the Queen in the air!
Thank you very much for the video. It was very helpful... I learned a lot and followed your instructions and I did the every thing like you! I would be happy if you could also make a video on the Triple Boeing 777 in the same format
3:23 that's the moment i knew i was doing that bad, when i'm in my 737 i used to put the irs on align and put the location and then put it on nav... but is working too!😅
Very well done, thanks but I would like to know if there is a way to avoid all this and set a Key command like Ctrl +E for the plane to start and do all that automatically?
@@AviationPro hello. Thanks that I know. Let me explico better. If you shut down the plane how do you start it up without doing all this? Let's say it is not possible. Then how do you make the plane to start again by the selected panel state? Thanks a lot
flight directors?, trim?, (auto brake to RTO was done at the last part :)), MCP settings not complete, taxi lights?, flaps?, etc etc etc... None of these were done. But nice video. I'm a big fan. Waiting for full flight video.
As I said at the end of the video, you can configure your MCP, radios etc. the way you want for your flight, there's no real point in showing that, this was pure the engine start and FMC procedure you saw here, which is the most complicated part ;)
Thanks! This was intended, I could use that revenue to maintain the channel, keep my website running etc. Making these kind of videos takes a lot of time and the ads allow me to get some revenue off the video while still providing the video for everyone for free.
So this may be a stupid question but how do you get the double terminals at the gate? Is it part of the xtreme environment pack or something else? I just want to know because I'd want to have proper terminals to connect to a 747, instead of just one at the front.
They are part of the FlyTampa Amsterdam scenery. Unfortunately they do not both attach to the aircraft though (just one), but that might be added later ;)
PMDG is the best payware Boeing addon library, even Boeing licensed it, funny question: how to turn on the wipers, cause i really like details that doesnt appear in other high quality addons
Johannes Very well done, thank you enjoyed the tutorial. Question, would you where to look for a check list for the new 747-400 V3? Thanks in advance. Regards
Thanks, glad you liked it! :) In the PMDG manual there should be something like a normal operations checklist. I never found a really good checklist myself though.
Great video! I made sure my overhead panel looks just like yours but when I turn on the fuel control switches, increases but at an extremely slow rate. Is this normal? When I start my engines on the -8, the N1 rises at a much faster rate.
I love it! 😃I don’t play P3D but FSX but I guess the procedures are the same. I‘d love to see a Tutorial of the Aerosoft CRJ 700/900 and/or the SkySim MD-11 (as I think, the PMDG MD-11 isn‘t available anymore ☹️😢) .
Nice video. Mate I just wanted to ask where do you get the visual guidance docking system from. I do have Rex HD worldwide airports and FS dream team ground services. But seem to struggle with the one you have outside your cockpit window. Any help will be great. Yours is nicely animated. Regards Simrin
nice video keep it up you just got one more subscribe but one question how did the pushback process was done you have not entered the details to the FMC ?
AviationPro thanks for answering my question can you tell me if it is possible to play PMDG on a laptop without extra controllers and what is the minimum requirements will be?
You can check the minimum requirements on the PMDG websites, but generally laptops are not very good at running advanced simulators with high quality aircraft like PMDG.
Thanks! I believe it was in MENU -> Options -> Simulation -> IRS Options and then on page 1 in the bottom-right corner you see IRS options, I believe you can set it there. :)
Good point, you can indeed also do that, but I like to do it this way so that the weight distribution is according to what is calculated in the flight plan. If you just enter the ZFW, the distribution will be different. Not that it matters a great deal, but I like to do it this way :)
Well yep depends! But in the 737 for example I'd definitely go for the ZFW variant. You only got one class (usually) and the plane gets the distribution right so no need to enter PAX number manually :-)
Not really, the weight distribution alters your center of gravity. Especially in the combi version here, the PMDG FMC might put in a lot more cargo than passengers when just entering a ZFW in the FMC, altering the center of gravity thus affecting the takeoff and trim settings etc.
peter kelberg just use what AviationPro has described so detailed, it works and is very straight forward. With his technique I've tried cargo too, and works beautifully, very close simbrief's calculations. There is a mathematical logic behind AviationPro's training on payload, and it works.
Possible you can show us how to do a direct flight, such as make the true heading point to the airport of choise so it will follow it, right to the airport?
Hey man really liked the way you demonstrated the FMC procedure. I started at the same airport (EHAM),same gate and used the same aircraft type (COMBI VERSION), but while entering the routes the fmc shows PENIL as invalid.Can you please solve the problem oe tell what to do..
Well, you need to get a subscription at navigraph.com or use Aerosoft NavDataPro to update your FMC AIRAC cycle. You just install the new data and it works just like that.
Thanks :) Why didn't you get the academic since the only difference would be the watermark? So many people are getting professional and the reason is because of the watermark?
Rishi Shah Basically yes. In my own view they are just wasting their money, unless they produce videos or films using P3D. And u can also cancel the watermark in Academic License. But at the same time u will also cancel ALL notifications.
You can do a lot, but definitely not sleep. You can make and eat good food, learn more about the aircraft you are flying by reading tutorials, watch RUclips videos, clean your room, as long as you keep an eye on the cockpit and ATC activity.
Thank you, and thanks for joining the channel! This is the Prepar3D simulator with the PMDG Boeing 747 addon. PMDG is now working to bring their 747 to the Microsoft Flight Simulator, none of which work on Mac I’m afraid… X-plane does and I think there are similar renditions of the 747 out there for that sim
+le le There are commands in the Prepar3D settings to move your eyepoint in various directions. I just assigned my keyboard arrow keys for the move eyepoint commands.
Thanks for a video. It helped me to understand weight part. :-) I would like to see the video about step climb. I have two questions: 1. about V2 speed in FMC and MCP. I saw in some videos that people set it on MCP as V2+20. Is it standard procedure or someone is making mistakes? 2. I do not understand how TRANSISION ALTITUDE works and to be honest did not care much about this before. Is it just for departure? When I descend, when should I switch STD back to normal value? I know that it changes itself with yellow letters (in 737) when I pass FL180 but it's a template from plane's config so I'm not sure when is the correct time for changing it.
Hi, glad it helped! I usually just set the V2 in the MCP, it probably depends on the airline how you do that. For the 747 is doesn't really matter anyway because usually LNAV and VNAV are already armed prior to departure, so at some point you will just follow the VNAV profile. The transition altitude is where you switch from the local QNH to the standard QNH (1013 hPa/29.92 inHg). In Europe all airports have different transition altitudes, but in the US they always use 18000 feet. So if you are flying in Europe, you have to set it manually in one of the VNAV pages.
How did you open the battery cover at 1:09? Mine was closed when game started. I tried left click as well as right click. Nothing worked. Thus, I could never power up my plane.
Thank you! There are standard assignments for moving your viewpoint in Prepar3D. I have just assigned my arrow keys to move eyepoint left/right, front/back, and Shift-Enter for eyepoint up and Shift-Backspace for eyepoint down.
I believe that it will keep aligning without actually going into the navigation mode. Putting it to NAV is more simple because than it will just align and at some point automatically go into the navigation mode.
You don't have to wait till the FMC starts up to connect external power. Just hold down the MENU button and the display will turn on just with the PMDG SETUP and FS ACTIONS options, so you can connect ext power immediatelly.
Hello thank you for your tutorials, have seen your iFly fs2004 startup tutorial , look pretty similiar, i want to if there is a big difference beetween both of them, because i m looking to buy one of them pmdg for fsx, my machine is i7 16ram nvidia 2 gigas. thanks....
Thanks! Well, the PMDG 747 is way more realistic, but their basics are the same. You might need a better video card, but you will find that the PMDG is more enjoyable.
Bedankt voor je hulp, altijd leuk om de kist vanuit nulstand te starten. Heb je trouwens ervaring met Track IR en zo ja, kun je mij dat aanbevelen? Het lijkt mij wat natuurlijker dan het gebruik van de hatswitch, maar ik ben ook wel een beetje bevreesd voor duizeligheidseffecten...
Thanks! Ik heb geen TrackIR, ik gebruik alleen af en toe FaceTrackNoIR voor videos. Ik gebruik het zelf niet voor mijn eigen vluchten. Niet dat ik er duizelig van word, maar het is vooral lastig om je view in een bepaalde positie te houden en dat kan misschien wel duizeligheid veroorzaken.
Thank you for this! The 747 is my fave airplane, and the whole reason I am invested in P3D. however, WTH ist he way to change the text color from white (which is what it is on my default 747 v3) to green, like you have here? I have been through every menu and cannot find a way to do it!
Shut down your engines and set parking brakes, then press CTRL+J and they will move. Some gates at this scenery are static though, but most of them move.
The 747, because it's more recent and there are many more fine details included. Also things like the cockpit shaking and all the different sound effects in the 747 make it more realistic :)
Thank you very much for this tutorial! I just subbed to you! Just one thing, I just completed my first flight of this 747, and I had received a fuel imbalance warning, I think it's because I kept the APU on for too long. How would I resolve this? Is it by opening the cross feed valves? Thanks!
Thank you! It enables the takeoff go-around mode, it will activate the flight directors to show you the appropriate attitude for takeoff, and it will set the thrust to the proper thrust setting. Without it your throttle will not be limited to the N1 value that's set for takeoff.
![Tutorial: Boeing 747-400 Startup from Cold & Dark! [iFly 747-400 V2]](http://i.ytimg.com/vi/sPkW-HngFho/mqdefault.jpg)
![Tutorial: Boeing 747-400 Startup from Cold & Dark! [iFly 747-400 V2]](/img/tr.png)
![Tutorial: Boeing 777 Cold & Dark Startup + FMC Programming! [2018] [PMDG] [P3D V4.3]](http://i.ytimg.com/vi/RFLDLO3Hipg/mqdefault.jpg)
![✈️👨✈️ VATSIM Full Flight: NEW PMDG 747 V3 - Amsterdam to Düsseldorf! FULL ATC! [P3D] [2017]](http://i.ytimg.com/vi/Los-orr8LNs/mqdefault.jpg)
![PMDG 747v3 First Look, Startup, and Departure [Prepar3d 3.4]](/img/1.gif)
👉 If you enjoyed this content, please consider leaving a tip! It helps a lot! :) Tip via PayPal: bit.ly/3EA04xP
🏅 New! Become a member of the AviationPro channel & unlock extra perks!
ruclips.net/channel/UCeAbVr5nEFwtYnEY42dIuuAjoin
👉 Check out my brand new Boeing 777 Cold & Dark Startup Tutorial!! ruclips.net/video/RFLDLO3Hipg/видео.html
The fmc is hard when you do it for the first time but when you know more about it and learn and get how everything does its pretty easy
This is why you're channel is awesome! Loads of fantastic content for all!
Thank you! :)
Thanks as always. Just bought the B747 with the PMDG discount on offer. Your tutorial will save me some time in learning. Keep safe.
Very well done, I think. Thank you for spending a bit of time explaining not just the "how", but the why of the steps you follow. It is, for the "technical" simmer, a great help. Thank you for taking the time to do it right! Technical accuracy is, for me, very important. I find that I have a few consistent problems--especially with programming the FMC! This helped me.
Thank you, glad you liked it! :) Yes I also like to explain the 'how' steps, makes it more interesting as well! :)
Beautiful, love your tutorials. so informative and its good of you to provide them to the sim community on youtube for free. Thanks man.
Thanks, you're welcome! :)
Probably the best channel for tutorials. Keep it up.
Very well done...I think the average sim hobbyist would find this very informative and easy to understand. Performance is likely the least understood and you explained it very well...
Thank you, glad you liked it! :)
This is indeed a superb and wonderful video tutorial that so many of us wanted to see. Your training and delivery is amazing and I've learnt so much from watching and studying your video and training materials on both the 737 and 747. I'm very new to. B747, and this video just linked both bridges between the 737 and 747 training that I was after. You perfectly described to us in great detail the important functions and procedures needed for us to enjoy this superb and beautiful majestic 747 aircraft. Thank you so much and please continue to produce such fine and superb quality training videos, I personally appreciate it very much, as I'm sure everyone else does. thank you so much
Thanks Chris! :)
One tip at 28:52 don't turn on the switches to run until the n2 rotaion is at 20% or you will do a hot start and damage the engines, overall very nice tutorial
Not on the 747 if it has autostart like this one :)
Yes, I noticed the Chapter marks......a great addition! Thanks.
You're welcome! :)
ALWAYS GET TO LEARN SOMETHING FROM YOUR CHANNEL NICE THUMBS UP!
THANKS
I like a lot your video. It is quite complicated to go all the features to get a 747 in the air.I fly always small plane like Cessna C172, 185, ... I learn a lot watching your video. Thank you and continue the good work. Guy
Thank you Guy, if you get the PMDG 747 V3 you'll love it :). Thanks for your support!
IT FINALLY STARTS UP! Thank you so much!
Thank you so much! Just picked up the 747 can't wait to do some long hauls :)
You're welcome, enjoy! :)
@@AviationPro
In most FMC tutorials, they just insert zfw, gross wt. But don't add & distribute wt. Of passengers & passengers in different classes. ... is what u did represents what pilots do in real flights????
If yes, then u have to upload VC about a detailed FMC functions...
Thank you ever so much , I am still getting to grips with fully programming the FMC , I never do Cold & Dark starts but this will prompt me to have a go ! Very nice video , keep up the hard work :)
Thank you! :)
Thank you so much! Now I dont need to worry about the plane going off course
Ze hebben er echt veel voor gedaan om de 747 weer tot leven te brengen. ;)
Zeker! Nu hopen dat we de 747-8 wat meer gaan zien in real life, nu de -400s langzaam verdwijnen.
AviationPro Weinig bestellingen, ;( Toch een mooie vogel.
Ali Kazemi 747 is één van de mooiste kisten die nog vliegt. De nieuwe generatie kisten zoals de dreamliner zijn ook mooi natuurlijk. Hopen dat daar ook ooit de pmdg versie van uit komt
Thanks for this very good tutorial! I recently bought the 747, and was looking for a decent video! Good, quality, nice tutorial! Good job! :D
Thank you! :)
Goed moment om zo'n video te maken ;) Misschien is het wel een goed idee om een video te maken over fuel management in de 74, aangezien dat toch wel anders is dan op de meeste andere vliegtuigen! :D
Awesome and fantastic video !!
Very good explanation which I do appreciate!!
Thank you very much for all of this !!
Thank you for this I found this video the most useful on the internet, going from airbus a320 to 747 i have A LOT more to learn. I am now at the stage of where the video finished so could i request a tutorial on pre flight, after take off, descent and landing for 747 just so i know I am doing everything right. I will continue to read the manual for now. Thanks again.
EDIT: Just seen your EHAM - EDDL video and again great help. will try my own flight now. Cheers
Thank you! Yes, I will probably make more in depth tutorial videos sometime. Thanks for watching ;)
thank dude! i forgot everything about the Queen having fun with 777 and 737 ngx, so i'll buy the queen soon :D
You're welcome! :)
Hello, great vid and tutorial, just one question, my 747 doesn’t have such pretty textures, Does it have something to do with my settings?
Thanks for the video Pro. It was very informative and thorough. :)
Thank you! Hope it helped out, should also work with the iFly 747 ;)
Fantastic tutorial! Very informative! Just gained a new subscriber 👍🏻
Thank you! :)
Simulator looks sick!! This is pretty good this game
It's not a game anymore ;)
Fire alarm test bell? Loved this vid regardless 👍🏼
Cool. Thanks for your hard work and dedication. Very helpful.
You're welcome!
Great video. Was going to leave the 747v3 because of the cost, but.........you should be being paid by PMDG. Remember, not too speedy, for the older learners! Many thanks!
Thank you! That's a nice compliment ;) I'll do my best, you can always use the pause button and repeat a segment if you'd like. I also have chapters in the description to make it easier to review a portion of the video again ;)
not sure if you did it to save video length but preflight and system test are always to be done for cold and dark startup.
Yes I know, I did that for video length because I wanted to show the actual startup procedure instead of all the other stuff that would still come next to it.
Nice video bro! You should consider a career in aviation, you've got the passion and skills ;) Is that something you are looking at? Happy flying mate and Hi from Down Under (Australia) !
Thank you! Yes, I'm definitely considering that, but I'm studying at university first ;). Thanks for watching! :)
Getting this on Wednesday and I can't wait :D
Have fun! :)
Thank you :)
Fantastic tutorial!
Thanks!
Could you do this video for other planes like 777 or 737?
Thanks
Who knows, if I have time ;)
Excellent. Thank you Aviation Pro. I huge help.
Thanks, you're welcome! :)
excellent video. It would be nice to see take off , approach and landing procedure, arriving at the gate and plane off
Thanks! Stay tuned for a VATSIM video with the 747 soon, then you will see all phases of flight :)
tanks ok. wait for, See you soon
Nice video, subbed. Just bought the 747 and i have no idea how it works. So it looks like your tuorial is the way to go, will watch it tonight while trying to get the Queen in the air!
Thank you! :)
+AviationPro Thank you so much for making this tutorial it helped a lot. :)
You're welcome! :)
Thank you very much for the video. It was very helpful... I learned a lot and followed your instructions and I did the every thing like you! I would be happy if you could also make a video on the Triple Boeing 777 in the same format
3:23 that's the moment i knew i was doing that bad, when i'm in my 737 i used to put the irs on align and put the location and then put it on nav... but is working too!😅
Like and subed. This tutorial helped me a lot!
Thanks, glad it helped! :)
Great video, you missed out setting the trim for takeoff which is quite fiddly in the PMDG and setting the flaps
Btw referring to the Boeing 747 PMDG QRH, Continues Ignition should be on during takeoff and as desired after that.
Awesome! Great video!
Thanks!
Another great video. Thanks
Thank you! :)
How did u move throu the cabin from left side of upperhead panel to the right? What keys do u use?
Very well done, thanks but I would like to know if there is a way to avoid all this and set a Key command like Ctrl +E for the plane to start and do all that automatically?
Thanks! You can simply load one of the panel states via the PMDG Setup menu in the FMC
@@AviationPro hello. Thanks that I know. Let me explico better. If you shut down the plane how do you start it up without doing all this? Let's say it is not possible. Then how do you make the plane to start again by the selected panel state? Thanks a lot
flight directors?, trim?, (auto brake to RTO was done at the last part :)), MCP settings not complete, taxi lights?, flaps?, etc etc etc... None of these were done. But nice video. I'm a big fan. Waiting for full flight video.
As I said at the end of the video, you can configure your MCP, radios etc. the way you want for your flight, there's no real point in showing that, this was pure the engine start and FMC procedure you saw here, which is the most complicated part ;)
Hello! what keys do you use to translate the view to see the panel above the co-pilot's head?
Loved the video. I had quite a few ads in the video was this intended or just a problem from RUclips?
Thanks! This was intended, I could use that revenue to maintain the channel, keep my website running etc. Making these kind of videos takes a lot of time and the ads allow me to get some revenue off the video while still providing the video for everyone for free.
Looking forward to your next 747 V.3 flight video
Thanks!
So this may be a stupid question but how do you get the double terminals at the gate? Is it part of the xtreme environment pack or something else? I just want to know because I'd want to have proper terminals to connect to a 747, instead of just one at the front.
They are part of the FlyTampa Amsterdam scenery. Unfortunately they do not both attach to the aircraft though (just one), but that might be added later ;)
PMDG is the best payware Boeing addon library, even Boeing licensed it, funny question: how to turn on the wipers, cause i really like details that doesnt appear in other high quality addons
Johannes
Very well done, thank you enjoyed the tutorial. Question, would you where to look for a check list for the new 747-400 V3? Thanks in advance.
Regards
Thanks, glad you liked it! :) In the PMDG manual there should be something like a normal operations checklist. I never found a really good checklist myself though.
Great video! I made sure my overhead panel looks just like yours but when I turn on the fuel control switches, increases but at an extremely slow rate. Is this normal? When I start my engines on the -8, the N1 rises at a much faster rate.
Excellent tutorial.
I love it! 😃I don’t play P3D but FSX but I guess the procedures are the same. I‘d love to see a Tutorial of the Aerosoft CRJ 700/900 and/or the SkySim MD-11 (as I think, the PMDG MD-11 isn‘t available anymore ☹️😢) .
Nice video. Mate I just wanted to ask where do you get the visual guidance docking system from. I do have Rex HD worldwide airports and FS dream team ground services. But seem to struggle with the one you have outside your cockpit window. Any help will be great. Yours is nicely animated. Regards Simrin
Thanks! This is the FlyTampa Amsterdam scenery and it comes with its own docking system ;)
Okay thank you.
Can I fly be added to fsx.
You are the best!!!!
Thanks for watching!
@@AviationPro All your tutorial videos, especially the cold & dark series really help me. Keep the good works bro!!
Gorgeous airplane! I love high-quality addons. Need to buy it!
She sure is! :)
nice video keep it up you just got one more subscribe but one question how did the pushback process was done you have not entered the details to the FMC ?
Thanks! Pushback was done using GSX, not using the PMDG pushback feature.
AviationPro thanks for answering my question can you tell me if it is possible to play PMDG on a laptop without extra controllers and what is the minimum requirements will be?
You can check the minimum requirements on the PMDG websites, but generally laptops are not very good at running advanced simulators with high quality aircraft like PMDG.
nice tutorial, just dont forget to turn eng and apu bleeds ON
Great Video! You mentioned to adjust time of alignment. Where can I set uo to realtime (7 minutes)? Thank you
Thanks! I believe it was in MENU -> Options -> Simulation -> IRS Options and then on page 1 in the bottom-right corner you see IRS options, I believe you can set it there. :)
For the payload: Why don't you just enter the ZFW? It's much easier. Real OFPs don't have the Pax numbers anyway.
Good point, you can indeed also do that, but I like to do it this way so that the weight distribution is according to what is calculated in the flight plan. If you just enter the ZFW, the distribution will be different. Not that it matters a great deal, but I like to do it this way :)
Well yep depends! But in the 737 for example I'd definitely go for the ZFW variant. You only got one class (usually) and the plane gets the distribution right so no need to enter PAX number manually :-)
actually weight is weight doesnt matter how you load the 747, its easier just to add the weight as per the pfpx or what ever flight planner you use
Not really, the weight distribution alters your center of gravity. Especially in the combi version here, the PMDG FMC might put in a lot more cargo than passengers when just entering a ZFW in the FMC, altering the center of gravity thus affecting the takeoff and trim settings etc.
peter kelberg just use what AviationPro has described so detailed, it works and is very straight forward. With his technique I've tried cargo too, and works beautifully, very close simbrief's calculations. There is a mathematical logic behind AviationPro's training on payload, and it works.
Very good Video, thanks so mutch
Thanks, you're welcome! :)
Possible you can show us how to do a direct flight, such as make the true heading point to the airport of choise so it will follow it, right to the airport?
I need this a lot thank you
Is there a second part of it?
You’re welcome! There’s no second part, but you can watch some of my VATSIM full flights featuring the 747
Hey man really liked the way you demonstrated the FMC procedure.
I started at the same airport (EHAM),same gate and used the same aircraft type (COMBI VERSION), but while entering the routes the fmc shows PENIL as invalid.Can you please solve the problem oe tell what to do..
+Akif Hossain Thank you! PENIL is a new waypoint, you need to update your AIRAC cycle for that.
can you please show me how to do? Cause i am totally new with this aircarft and the dealing with the fmc
Well, you need to get a subscription at navigraph.com or use Aerosoft NavDataPro to update your FMC AIRAC cycle. You just install the new data and it works just like that.
Is there any free option to do that?
Not as far as I'm aware of unfortunately :(
Nice vid! Getting this and P3D in a couple of days. Which license of P3D are you using? I'll be getting the academic
I'm using Pro, but academic is fine, but you will have a small watermark in the top-right corner.
Thanks :) Why didn't you get the academic since the only difference would be the watermark? So many people are getting professional and the reason is because of the watermark?
Rishi Shah Basically yes. In my own view they are just wasting their money, unless they produce videos or films using P3D.
And u can also cancel the watermark in Academic License. But at the same time u will also cancel ALL notifications.
Good to know, thanks :)
How do you pass the time once you get to cruise? Do you sleep or read a book?
You can do a lot, but definitely not sleep. You can make and eat good food, learn more about the aircraft you are flying by reading tutorials, watch RUclips videos, clean your room, as long as you keep an eye on the cockpit and ATC activity.
AviationPro The sounds are just amazing.. good work! Love your videos
Good video, thanks!
Thank you! :)
Great channel! Where did you get this sim? Does it run on Mac? I fly 747 and would love this for my own studies. Thanks!
Thank you, and thanks for joining the channel! This is the Prepar3D simulator with the PMDG Boeing 747 addon. PMDG is now working to bring their 747 to the Microsoft Flight Simulator, none of which work on Mac I’m afraid… X-plane does and I think there are similar renditions of the 747 out there for that sim
Beautiful tutorial! Thank you so much!
Thank you! :)
Awesome. Thanks so much for this!
Thanks, you're welcome! :)
Maybe a simple question, but how do you move sideways through the cockpit ? I`m allways switch with the A button to switch views.
+le le There are commands in the Prepar3D settings to move your eyepoint in various directions. I just assigned my keyboard arrow keys for the move eyepoint commands.
Thanks. Also found that ctrl alt - enter and backspace also do the same,
Thanks for a video. It helped me to understand weight part. :-)
I would like to see the video about step climb.
I have two questions:
1. about V2 speed in FMC and MCP. I saw in some videos that people set it on MCP as V2+20. Is it standard procedure or someone is making mistakes?
2. I do not understand how TRANSISION ALTITUDE works and to be honest did not care much about this before.
Is it just for departure? When I descend, when should I switch STD back to normal value? I know that it changes itself with yellow letters (in 737) when I pass FL180 but it's a template from plane's config so I'm not sure when is the correct time for changing it.
One more question:
How should I set cabin pressure correctly before flight?
Hi, glad it helped! I usually just set the V2 in the MCP, it probably depends on the airline how you do that. For the 747 is doesn't really matter anyway because usually LNAV and VNAV are already armed prior to departure, so at some point you will just follow the VNAV profile. The transition altitude is where you switch from the local QNH to the standard QNH (1013 hPa/29.92 inHg). In Europe all airports have different transition altitudes, but in the US they always use 18000 feet. So if you are flying in Europe, you have to set it manually in one of the VNAV pages.
How did you open the battery cover at 1:09? Mine was closed when game started. I tried left click as well as right click. Nothing worked. Thus, I could never power up my plane.
Depends on which 747 addon you’re using. Here you can just click on it, not sure left or right, but it can open.
Hi AviationPro This Video is very Nice and helpful for me. But how Do you move your viewpoint?
Thank you! There are standard assignments for moving your viewpoint in Prepar3D. I have just assigned my arrow keys to move eyepoint left/right, front/back, and Shift-Enter for eyepoint up and Shift-Backspace for eyepoint down.
AviationPro Okay Thanks a lot for answer
Sir what is the Cylce/Airac of the FMC of B747 PMDG?
When setting the IRS, why not simply set the cockpit selectors to "Align" mode? What happens when you do that instead?
I believe that it will keep aligning without actually going into the navigation mode. Putting it to NAV is more simple because than it will just align and at some point automatically go into the navigation mode.
when are you gonna live stream a full flight with this bird? Flytampa EHAM and TNCM=best flight ever
It will probably be featured in the next VATSIM full flight, not sure about the destinations though, stay tuned for that! :)
good one man!
Thanks!
You don't have to wait till the FMC starts up to connect external power. Just hold down the MENU button and the display will turn on just with the PMDG SETUP and FS ACTIONS options, so you can connect ext power immediatelly.
Zoltán Szőke wow. Thanks didn't know that
Didn't know that either, nice, thanks! :)
You should get chase plane or ezdok- it really makes flying much easier
I know about it, but had to save money for the PMDG haha
Hi, Do you know how to turn on the airplane lights from outside view? let's say like in regular planes pressing L... any similar way for PMDG?
You can set keyboard keys to that if you want to, but I don't know the default keys to be honest :)
Yes thank you, so easy, control L
Cheers
Advice: PMDG 777 or PMDG 747-400 Queen of the Skies II???
747, it's less automated and as such more fun to fly I think. It is also a bit more advanced and with an even higher degree of immersion than the 777.
@@AviationPro Also cheaper :)
Hello thank you for your tutorials, have seen your iFly fs2004 startup tutorial , look pretty similiar, i want to if there is a big difference beetween both of them, because i m looking to buy one of them pmdg for fsx, my machine is i7 16ram nvidia 2 gigas. thanks....
Thanks! Well, the PMDG 747 is way more realistic, but their basics are the same. You might need a better video card, but you will find that the PMDG is more enjoyable.
are you going to do more tutorial for this plane like landing ????
Probably, so stay tuned ;)
Nice!!!! Thanks for the tutorial and great video :D. Also thanks for the super fast reply :D
Bedankt voor je hulp, altijd leuk om de kist vanuit nulstand te starten. Heb je trouwens ervaring met Track IR en zo ja, kun je mij dat aanbevelen? Het lijkt mij wat natuurlijker dan het gebruik van de hatswitch, maar ik ben ook wel een beetje bevreesd voor duizeligheidseffecten...
Thanks! Ik heb geen TrackIR, ik gebruik alleen af en toe FaceTrackNoIR voor videos. Ik gebruik het zelf niet voor mijn eigen vluchten. Niet dat ik er duizelig van word, maar het is vooral lastig om je view in een bepaalde positie te houden en dat kan misschien wel duizeligheid veroorzaken.
Could you make an updated one of these? Like a full flight? That would help so much!
There are some full flights featuring the 747 on this channel
so the procedures are almost the same as the T7? correct? by the way thanks for the tutorial ( even though I dont have the queen of skies YET.)
Roughly, but this is of course a 4-engine airplane and a bit older as well.
Are you entering a random value in cargo in simbrief?
Yes ;)
What checklist you use? Alternatively, you have a link where I would be able to download it? Thank you for your response :)
I just follow the standard operating procedures that come with the PMDG manual ;)
Thank you for this! The 747 is my fave airplane, and the whole reason I am invested in P3D. however, WTH ist he way to change the text color from white (which is what it is on my default 747 v3) to green, like you have here? I have been through every menu and cannot find a way to do it!
What's the PFFFT/ horse sound after you turn the standby power to auto?
Speakers and MAWEA (the computer that controls the 747) starting up.
How did you get the jetway working with the flytampa scenery ?
Shut down your engines and set parking brakes, then press CTRL+J and they will move. Some gates at this scenery are static though, but most of them move.
Dear, how you compare PMDG 737 with 747. Obviuosly both different aircraft but from quality and realism aspect, whats your recomendation?
The 747, because it's more recent and there are many more fine details included. Also things like the cockpit shaking and all the different sound effects in the 747 make it more realistic :)
Thank you very much for this tutorial! I just subbed to you! Just one thing, I just completed my first flight of this 747, and I had received a fuel imbalance warning, I think it's because I kept the APU on for too long. How would I resolve this? Is it by opening the cross feed valves? Thanks!
Thank you, you're welcome! Yes, you should play around with the crossfeed valves and pumps to maintain fuel balance. It's all in the manual ;)
Ok, thanks, I will take a look at the manual. I'm just glad I finally have the PMDG 747, the 747 is my all time favorite aircraft.
As for the TO/GA button, I can take off without pressing the button What is its meaning and vitality?
Thank you! It enables the takeoff go-around mode, it will activate the flight directors to show you the appropriate attitude for takeoff, and it will set the thrust to the proper thrust setting. Without it your throttle will not be limited to the N1 value that's set for takeoff.
beautiful bird
She sure is!