How to link your remote to your Comfort Base

Press and hold the Link button (the black round button on the control box located on the bottom of the base) until the LED light on the control box next to the Link button turns on and then off. Release the button and the LED light will blink.
Simultaneously press and hold the Head Up and Foot Up button (the left button and middle button located on the top row of the remote) until the remote’s backlight starts blinking.
Release the two buttons and the backlight and the LED light on the control box will blink until linked, then they will turn off.
Test the bed to make sure it is working, and repeat steps if it is not.
If you have repeated these steps a couple of times and you find you still cannot sync the remote to the base, please call 855-581-3095 for further assistance.

[@jazminmorales9811]

I hadn't used my electronic functions on my bed in awhile and when I tried I couldn't get it to work even when the control was working. I was so sad but I knew someone somewhere would be able to help and for that I thank you so much 🙏🙏

[@나를찾아서]

Thank you!!

[@davidm8076]

Thank you. Video much more helpful than instructions Serta sent me. Thumbs up

[@Glideaway]

Glad it helped

[@axius24]

THANK YOU

[@randalmacy]

Thank u

[@missmahan]

scrape out any battery corrosion inside the box under the bed

[@anthonyleydens]

Not working for me. Followed instructions and it isn't working.

[@anthonyleydens]

Model pcu_jldk-18-1 is the remote