Mustang GT 3V Hot rod Cams & Electric Cutouts
HTML-код
- Опубликовано: 30 сен 2024
- Electric cutout
C&L cold air intake
4.10 gears
delete plates
frpp hot rod cams
pacesetter long tubes
pacesetter H pipe
125 shot nitrous
pypes violator alxe backs
eibach sportline spring
koni struts
20 in bullitt wheels
Dude those Hotrod cams sound awesome and I love the wheels. That's one stang done RIGHT. Love it.
LOL thanks
I kept trying to kill the ant at the bottom of my screen .
Lol
"it came from desert" :)
Bruh thats hecka cute😂
man if I had this setup, I would only drive it with cutouts open. sounds so much better than my 5.0 :(
It's too loud IMO
2:20 That ant is running for its life from that awesome sound!
Good looking stang, sounds good too! Chrome Bullitt wheels look great on the color!
The01Cav Thanks man
One of the best sounding s197 man
The most beautiful video I have ever seen 🔥🙏
This thing sounds AMAZING! can't wait for my Stang to sound like this!!
NAAAAAAAAHHHHHHHHHHH..... IM not eating this, this engine is not just cammed and exhaust, this thing sounds build up..............................
Superclean! Amazing look…so classic😍
Are you running any mufflers behind the cutouts?
Which electric cutouts are those you had on this 3v? I got electric cutouts installed on my 07 GT, but when I close the valve you can still hear the car making more noise from the middle instead of the rear, but my god they sound like hell is loose when opened.. When you closed the valves on the video the noise was reduced by A LOT, and you can hear the exhaust goes all the way to the mufflers... Mine are eBay cutouts probably why the valves don't completely seal the sound when closed... Thanks in advance 👍
I could listen to this all day , can you make longer videos ?
Love the car beautiful!!!...sounds amazing
You from new orleans or texas?
Thanks bro, I'm from New Orleans but I stay in Houston.
nola504boy1 ahhh ok...i see the usernane then i saw the license plate so i had to ask lol in from denham about an hour from NO i hear alot goes on in Houston friend of mine goes up there alot drives a black mach 1
Were there any issues with the Pacesetter headers and h-pipe during install? Clearance issues? Did they come with all the necessary gaskets and o2 extensions? I have read mixed reviews about these headers, but you can't beat the price for the ceramic coated ones and they are 1 3/4 instead of 1 5/8. Any help or insight you can give me would be much appreciated! Beautiful car and sounds freakin sweet!
+Clean93GT Thanks bro, but only issue I had was it rubbing against the steering colum at first. After that everything was okay.
Believe it or not like it better with no cut outs! Sounds so low tone and fat!
how streetable was this car cam wise before you changed the gears ? could you take distance trips in it?
Yes never had any issues
Is that 125 shot of NOS on the stock bottom end?
I've been searching for your account on Instagram but couldn't find it
davidv my Instagram is mustang_rider_
Brooo...sounds sick.How does the electric cutouts work and how much to install
Just a button I press & it open & close my exhaust. So I'm quiet or loud whenever I want to be I love it.
@@nola504boy1 where did you put the cutouts?
what’s the RPM at idle here?
Man now I want some cutouts lol!!!!! Nice bro nice!!!!
Thanks bro it made a huge difference.
I miss your mustang 😞🥺😭
That thing is clean ... Sweet looking 3valve
Sheeesh!
3v sounds good with just about any setup..4v can't compare sound when it comes to a 2v or 3v...but I'm not talking hp just sound..
Oh my Goodness
Man that thing sounds good!!!
Thanks bro
Yea its sick...aye Chris Frazier when you posting some more vids of that beast you...and check out vids on my channel fellas...
Yeah I know Chris doesn't post enough vids of his beast. Ok mgerren88 I'm about to check yours out now. Sub to mines as well bro.
nola504boy1 Sounds mean. Congrats
Ight nola504boy1 been subscribed man...ight we do a lil running down here in thibodaux, la...nothing like the pad in da city tho lol
Do you still have that car? What was the full exhaust setup when you took that video?
nice sound and great car :-)
Thanks
What hot rod cams are installed in this video anybody k ow
I hope to have mustang like bad ass like this
What size rims do you have installed
Beastly. I love it! :D
Super cool! What lowering kit do you have on that beauty?
What kind of cutouts did you use and where do you get them are they electric controlled
dam! sounds sick man!
Thanks bro
Sounds mean!
Thanks
Any performance upgrade with cam?
This whole car is clean and beautiful
I love those cams and yeah what kind of wheels are those?
Man she sounds amazing, what’s the full exhaust list you have setup if you don’t mind me asking
Eyyyy look who I found.... Lol its mustangmooch bro
Lmao what's up
That thing looks and sounds amazing.
thanks bro
hey nola!! i was thinking of getting long tube headers. and i noticed in the description you have pacesetter long tube headers!! i saw these on american muscle for a fraction of the cost of what everything else is selling for, have you ran into any problems at all with them ?
No I like them, only issue is the paint burns off them
I know this is an old video. Looking to get some. What brand cut outs were these and do you recommend? Did they ever leak?
Tony I forgot the name, they were DHM or something like that. They never leaked or anything.
How much did you lower the car? What springs?
Eibach sportlines
How did the pacesetter longtubes and h pipe hold up.
Say bro which cam you think would be best for my 2011 gt bro, um stuck. .i know the gains or not like ls motors..but i want as much as i can get out my gt n/a...this wt i have installed so far, cobra jet intake manifold, cold air, throttle body, 3.73 gears , bbk long tube headers and xpipe??? Would really like your opinion an thoughts on possible gains..thanks
Stage 3 comp cams. But like you said the gains are no where near the same as a LS motor. You'll gain around 30-35 rwhp with them on your coyote.
nola504boy1 once again thanks...much appreciate it...um trynna get at least 530-600 to flywheel n/a bro
You must be buying heads also then right?
Car sounds amazing, I remember this was Nate Riders favorite😁, soon this gonna be like mine.
Love my 06 Windveil blue vert. The 2024 Mustang has a very similar color in vapor blue.
Might be a stupid question but would you post up a vid of data logging? i can't seem to find one and have not tried to do it yet because of that.
Not a stupid question at all. I can do that because I need to do another tune because of my electric cutouts, when they're open the car isn't getting any back pressure so I want them to tune for the cutouts. I'll datalog & record it
Hey man what’s your set up I like it might want to do it on mine
thaz the sound !.."like a lot" :D
What power gains did it give you
Beautiful Ride man
The sound is great 👍
all those mods on a stock engine? just wondering because I have every single bolt on my car ,I want to add nitrous but I'm scared I'm going to blow up the engine.
Stock engine can hold 450-500 rwhp without a problem with a good tune. Tune has a lot to do with it.
Thanks bro I might do it then
what’s the cam specs
hey bro, did you upgrade your fuel pump or plugs? and if not is it still running good?
Yes I upgraded my plugs to a colder plugs because I'm running nitrous. Still have the stock fuel pump
Who does your tunes bro? I got my custom ones from Mpt and the freakin suck! I did my own custom one on there was better than there's im terrified to run the nitrous tune they sent me now that my kits hooked up lol.. It smokes a good bit and is a turd with no spray I mean not anywhere even close to stock hp torque wise can't be right Huh lol?
Lol I use Bama tunes. I haven't had any problems with them. I have free tunes for life with Bama. You see how my car performs with the Bama tune. It beats a lot of car with custome dyno tunes all the time. When Bama sends me a tune what I do is datalog it & send it back to them. The look at what the car is doing and make changes where it's needed. Most people just get a tune and never datalog it.
David Martin Yes I can help you bro
Did you have to change out your springs with the cams
No
I love this car sir... 👍😋
Dude was this with/without the M80's (when closed)? Those resonators killed the lope right?
no this wasn't it. I had pypes violators in this video
+nola504boy1 cool thanks man, m80s removed and the violators on. Gotcha. I appreciate the quick replies.
Damn man, hell of a nice sound!! Nicely done with the cutouts as well.
Bruh you have an ant 😂😂
wat springs are u using and wat drop I need this setup!
Eibach sportline springs
Ant taking a stroll at 2:23 lol
LOL I saw that
Those 20 inch rims
Wanna know exactly what size of tires and width of rims
Of all the videos you posted, this is the one that sounds the best. Your car looks an sounds great. Love the way it idles.
Roland Landry thanks, it was a fun car.
Oh my Goodness
Sounds incredible dude
nice
Love the way the car sound in looked bro what side rims are those in how many inches is its drop bc I have a mustang just like yours dude
Thanks, the wheels are 20x8 & 20x10 in the rear. I have the eibach sportlines springs for the drop.
+nola504boy1 ok thx bro :)
Torque thrust 20's?
Eric Hovermale American muscle 20's
Oh my gawwwwd I love it.
1/4 mile time?
I love the Borla S-Type and these, they are the deep sounds I prefer on a V8. Nice ride Bruh.
thanks
I don't think I could get any of those exhausts here in Germany tho... the cops would be all over me in no time. :'D
Badass 👍
Nice
Thanks
Yup I kinda jumped the gun lol they wanted me to get it and data log it lmao I didn't know I was just like what the hell did Yall do to my car bro lol
LOL yeah send it back to them so they can see what your car is doing. The tubes they send to people are generic tunes.
Yeah bama
I don't have any issues with mines. But like I said I usually datalog mines
yep
where is the electric cut out located?
Dyson Williams on the h pipe
nola504boy1 did you buy one or two
perfection!!!
what degree?
not sure
Nice car bro
Thanks
Beastly car and you seem like a cool dude so I subbed, I am graduating in april and with this car you're making my decision between getting a 09 and modding right away or a 13-14 and waiting it out so much harder lol
+Brandon Bradley Get a 13-14 bro. Their fast ass they are so you don't have to rush into modding it. I love my car but i had it before 5.0's came out. You can't beat the performance of a stock 5.0 I'm just being honest.
yeah thats what I hear thanks for the advice. The one thing I do love about the 3v is that lope the cams give, the ghost tunes just aren't the same ha.
+Brandon Bradley no they're not lol. If you put enough money into the 3v they can be quick, but the 5.0 are already fast stock LOL
Brandon Bradley flat top pistons on a 3V w/ properly degreed cams would rival or beat any 5.0 out right now. I love ford engines to death. But, a 3V is deadly when built right. You'd also be shocking the hell out of a lot of people.
did you just quiet the cams?? I didn't even know you can do that
Lol yes, I have electric cutouts so I can be loud or quiet by just pressing a button.
that's awesome bro, I wanna get cams soon
how much did that run you? the cams with the electric cut offs
outs*
+Bruce Soto cams were around $800 + $500 labor. Cutouts were around $300 + $250 labor
IS this just a tune?
He probably had it tuned but the sound 99% comes from the hot rod cams and the exhaust cutouts
Brian James you're right bro
This is a clean ride! Have you done anymore upgrades?
Thanks bro, no I added 4.10 gears since this video that's all.
@@nola504boy1 naaaahhhhh this cant just be cams and exhaust, this engine sound build up, no way its a stock a 4.6..........................
@@FASTU-mz3tmCam Swap.
fucking badass
thanks bro
+nola504boy1 yeah that is sick man. Gonna do the same on mine now! Love it!
+Gavin F thanks man.
+Gavin F the car is actually slower with the Cutouts open due to not having any back pressure. I only open them for car shows & car meets.
+nola504boy1 thanks for the info! Yeah i want it just for the sound when the occasion arises. Ill keep it closed for the the hard driving. Once again man, best sounding s197 i've heard so far!
sounds good!
Thanks
what's the idle set to in this video?
John Whitehead I'm not sure bro. I think it was at 740 in this video. It's at 690 now
nola504boy1 sweet because i just got the hot rod cams in yesterday and looking to get cut outs next and hows driving around with it at 690?
John Whitehead it's fine no issues. My video with me idling with my drag setup is at 690. Check that video out
oh I've seen them all haha very gorgeous car you've got , you're the one that made me pull the trigger on the hot rods
John Whitehead lol ok cool man. If you have any questions just ask brother. I'm doing a total different build now. No more nitrous I'm doing a turbo setup now
man I'm not a ford guy but got dang that thing sounds so good
Thanks brother
Deficit ride tube characteristic sudden actress orange pull deliver adjustment penalty.
sick cams bro will that do any type of damage to the vehicle? ?and what about a ghost tune do you know of that
No the cams won't hurt the car. If you on a 5.0 you can ghost cam it. But there's no ghost cams available for the 3V.