You are my best friend!! It's official you have saved my night!! I have a crazy amount of orders to get out before we move. The thought of moving my sublimation printer again has me anxious, on top of it printing lines. Girl you rock!!
Thank you for this tutorial!! Hi have this printer and I was having issues. Your tutorial helped me resolve my line problems and I honestly can’t thank you enough!!
Gurl, gurl, gurl!!! This video saved me so much frustration. I have been searching for a while for a way to fix my printer. This was the cure I needed. Thank you so much for sharing.
Do you know how to turn of fast printing on a Mac? I just got this printer and got it completely set up but I can’t figure out how to turn off fast printing.
Do your print escampo did NIT offend me. Hell I want to give you all the money in my piggy bank. !!! That’s AWSOME and yes. I’m a subscriber now cause if these dam lines. Haven’t tried printing yet. Going through your steps but had to stop to tell you I LOVE YOUR PRINTING EXAMPLE ❤❤😂
Hi, I have the WF 7210 printer & I have a question.... My printer is printing with lines of little dots in perfect lines, I'm not sure what's happening. I've cleaned the print head & all that. PLEASE HELP:( I have printed about 10-15 pages and still have the dotted lines, it even has dots that aren't printed like it's almost poking through the paper... Please help
Ooh girl I pray this works. I have the same printer. And I think I messed up when I set it up originally with the original printers. I have the same cartridges.as you and the ink. She. I changed the cartridges I had no issues, the printer does recognize them. It printed out two pics but EXTREMELY faded. Then Nothing.. it acts like it's printing but it don't 😂 I'ma order this cleaner and watch this again Pray for me
Oh my.... my smaller printer had that issue with the M cartridge... i ran back to back print head checks until i got That bad boy to work... it took almost 10 cleans 🤦🏽♀️ Good luck!
You mentioned in the beginning you set the printer to work with after market cartridges or ink... What are those settings? Could you do a video on that. Thanks in advance
@@nikkilong7377 i was lucky in the purchase of my cartridges. As an initial tip, look up “refillable ink cartridges” + your mode printer and be sure to find chipped cartridges. Chipless WILL NOT work with epson/iOS
I have a 7210 also, it is always trying to update firmware. Will that ruin it for sublimation? Should i replace the sub cartridges after over a year? It sometimes says the cartridge is not recognized as genuine. Thanks!
I’ve only replaced my cartridges 3 times in the last 6 years. It’s really just preference. They get warm so it just makes life easier not having to Finnic with them all the time. If it’s saying it doesn’t recognize, unplug the printer and take the cartridges out. Turn it back on without the cartridges and install them again. It will ask “ are you using non genuine ink?” Answer yes. It’s the only way it will work. (And I’ve little never updated the firmware. I’m scared it will deactivate the cartridges. 😂😂
I am having a different issue. I have searched it and can't find a video on it. I have checked all settings. My image prints beautifully but when I press it all I see is yellow. I have sublimation ink. Any advice.
Are you sure it's sublimation ink..I did the same thing and went back and checked my order and realized I ordered pigmented ink. That's why it's yellow
If cleaning hasn’t worked, it may be time to buy new cartridges. I’m sorry the solution didn’t work for you. You could also try the full instructions on the package, the way i did it was not the company’s recommended use. Just how I use it.
Thx!!! Subbed and liked. - do you use sublimation ink on heat transfer vinyl too? The reason I asked this is because sublimation ink doesn’t work on cotton or on dark garments. Thanks
De Mango you can sub onto white glitter vinyl for a dark garment. But that’s only if you desire the glittery look to the design. Also they do make a paper that is sublimation onto Cotton. I found a link on amazon for you below. It’s way pricier than just buying a polyester sub straight but it’s useful if cotton is all you have! Kate's Craft Store 50 Sheets 8.5"x11" Sublimation Paper for Cotton for Epson, Ricoh, and Sawgrass Printers with Sublimation Ink www.amazon.com/dp/B07MYBMMTS/ref=cm_sw_r_cp_api_i_TaUqFbS392Y74
Omg, thank you!! I've been searching everywhere to find a video explaining this problems like you have!! 💖
You’re most welcome
You are my best friend!! It's official you have saved my night!! I have a crazy amount of orders to get out before we move. The thought of moving my sublimation printer again has me anxious, on top of it printing lines. Girl you rock!!
Thank you for the love!
Thank you for this tutorial!! Hi have this printer and I was having issues. Your tutorial helped me resolve my line problems and I honestly can’t thank you enough!!
Happy to help!
You are truly a life saver. My printer was only printing black, once I followed your instructions it works great. Thank you once again.
Awesome 👏🏽 happy to help!
Gurl, gurl, gurl!!! This video saved me so much frustration. I have been searching for a while for a way to fix my printer. This was the cure I needed. Thank you so much for sharing.
Happy to help! I love this printer!! Tho it’s been quite the headache over the last 3 years!
Thank you. You got straight to it. It’s hard to tolerate a lot of extra talk. Perfect
Glad you enjoyed it! 😍
Yes, straight to the point, no BS!
This tip really works. Thanks so much for posting! Absolutely saved my Epson from the garbage. You are right use your printer often!
I'm going to subscribe because of your energy! It's the look for me
Lol it’s funny cause what I give on camera is only half of me! Every time I edit videos I be like… dang I didn’t even smile 😂🤣
And thank you!!!! 😍🥰😘
This video was SUPER helpful, but it was that final print that made me subscribe! haha! :) THANK YOU!!
Thank you… ❤️❤️
Do you know how to turn of fast printing on a Mac? I just got this printer and got it completely set up but I can’t figure out how to turn off fast printing.
I don't have my printer yet but Goddess you are funny!!! Don't Change and Keep Shinning!!!!
You are the first that I have seen with the same printer as I have. Thank you for the video. I will definitely try this fix!
thanks for sharing. i'm still learning my printer. you're the only person with the same exact one. i need to learn more.
A tip : you can watch movies at flixzone. Been using it for watching lots of of movies lately.
@Augustus Carter yea, I've been using Flixzone} for years myself :)
@Augustus Carter yea, been watching on flixzone} for since december myself =)
Thank you! Learned something and liked and subscribed!
Thank you!
Thank you so so much, I've been searching for a fix for the line issue in my Sub print design. Loved the video, very informative.
Happy to have helped! I’m definitely planning to be more sublimation videos
I sure hope it helps me. I’ve ordered my printers jack cleaning solution. Will send update. Thank u 🙏🏽
I hope it works out!
Loving that image
Thank you, This has been a huge help.
Omg I’m so happy I found your page I’ve been try to find videos on WF-7210 and one had this exact one.
I think I’ll do more videos featuring the printer 🖨 ☺️
Please do.🤗 I just changed my black ink now the printer is saying the ink is low after I refilled it. 😩
@@jonesdaily1881 if it’s the after market cartridges the ink levels will almost never be correct 🤷🏽♀️ 🤦🏽♀️
@@jonesdaily1881 it sucks! Big time!
Thank you so much it took care of my problem!!
What hole did she put her thumb in?.. is it the hole where insert ink or the air hole
My entire first column of color is missing do you think this will
That happens a lot when the cartridge needs to be bled.
Try bleeding the cartridge, than doing a print head check and it should fix the problem.
Also, if you’re using sublimation ink, be sure to run your machine at least 2 times a week to prevent that from happening in the future.
whats the cleaning kit called love? I couldn't find it!
Tonha Printhead Cleaning Kit, Printer Cleaning Kit Perfect for Inkjet Printers Canon/Brother/Epson/HP 8600 5520 4620 6520 6600 6700 6968 6978 8610 HP Printer 922 Pro100 MX922 Canon Printer (100ML) a.co/d/ixCHujL
Thanks keep up the good work 😎👍
Thank you
@@rjs6663 oh lord! 😳 please god don’t start this on my channel
Will this work for Epson WF 2850?
Thank you for this technique! I'm a new subscriber, and you are an awesome teacher!
Thank you!
Do your print escampo did NIT offend me. Hell I want to give you all the money in my piggy bank. !!! That’s AWSOME and yes. I’m a subscriber now cause if these dam lines. Haven’t tried printing yet. Going through your steps but had to stop to tell you I LOVE YOUR PRINTING EXAMPLE ❤❤😂
thank you for all you give sis
❤️❤️😍
Love your printed image LOL & thanks for the tips. Turing off high speed printing also helps.
I have the same problem with my printer Epson WF7210 I will try this and let you know how it went 😊👍🏾
Awesome! I hope it works! Or it might be time for new cartridges
Girl, THANK YOU! My printer was just about to get smashed against the wall 🤣
😂😂😂
let me tell you i just subscribed because of the image you printed!!!
Thank you! But, I have an epson 15000 lol and I can't clean it out. Lol
Thank you! Definitely helpful. So you know how to set the settings to print out very slow vs fast. Can you help!! Lol
Thank you so much I have liked and subscribed. helped me a lot.
Can I use alcohol? I don’t have what you have. I have an Epson that’s been converted over but the print outs are a mess
Hi, I have the WF 7210 printer & I have a question.... My printer is printing with lines of little dots in perfect lines, I'm not sure what's happening. I've cleaned the print head & all that. PLEASE HELP:( I have printed about 10-15 pages and still have the dotted lines, it even has dots that aren't printed like it's almost poking through the paper... Please help
Where did you get your cartridges. TIA
Got them on Amazon.
Thanks madam, I humbly request you to help me that idea on canon pixma G2411 please.
😂 🤣 I just subbed because of the ending graphic. You will probably be able to sell them again this year, just swap the year out.
Lmao I had that thought a few days ago!
OMG I have watched your video several times and I am still having issues with the grid lines. any other suggestions???? Please HELP
Thanks for this video.
What do you do if you accidentally pushed the tip of the syringe all the way into the cartridge? :( help pls
Get new cartridges
What do you do after head clean and you still have broken lines
If that were my case, I’d honestly just order new print heads
Loved your sign lol
Thank you so much. This great info helped me in so many ways. 👍🏼
Thank you
Do you know if this method will work on an Epson 4700?
I can’t say for sure. I’ve done this in my epson 7210 and 3730
Thank you ♥️
Thank you for sharing that video.
😁😆Love the print!! Thank you, imma give it a try.
Ooh girl I pray this works. I have the same printer. And I think I messed up when I set it up originally with the original printers. I have the same cartridges.as you and the ink. She. I changed the cartridges I had no issues, the printer does recognize them. It printed out two pics but EXTREMELY faded. Then Nothing.. it acts like it's printing but it don't 😂 I'ma order this cleaner and watch this again
Pray for me
Oh my.... my smaller printer had that issue with the M cartridge... i ran back to back print head checks until i got That bad boy to work... it took almost 10 cleans 🤦🏽♀️
Good luck!
You mentioned in the beginning you set the printer to work with after market cartridges or ink... What are those settings? Could you do a video on that. Thanks in advance
@@nikkilong7377 i was lucky in the purchase of my cartridges.
As an initial tip, look up “refillable ink cartridges” + your mode printer and be sure to find chipped cartridges. Chipless WILL NOT work with epson/iOS
Model*
I have a 7210 also, it is always trying to update firmware. Will that ruin it for sublimation? Should i replace the sub cartridges after over a year? It sometimes says the cartridge is not recognized as genuine. Thanks!
I’ve only replaced my cartridges 3 times in the last 6 years. It’s really just preference. They get warm so it just makes life easier not having to Finnic with them all the time.
If it’s saying it doesn’t recognize, unplug the printer and take the cartridges out. Turn it back on without the cartridges and install them again.
It will ask “ are you using non genuine ink?”
Answer yes. It’s the only way it will work.
(And I’ve little never updated the firmware. I’m scared it will deactivate the cartridges. 😂😂
@@nicciclutch me too! Thanks so much! Sista luv from GA!
HELP HELP, I have a Epson wf-7210 converted to sublimation but it won't print colors
Are you using Disposable or refillable tanks?
I am having a different issue. I have searched it and can't find a video on it. I have checked all settings. My image prints beautifully but when I press it all I see is yellow. I have sublimation ink. Any advice.
Are you sure it's sublimation ink..I did the same thing and went back and checked my order and realized I ordered pigmented ink. That's why it's yellow
@@jasminecornelius5227 yes it is. I have had several people check it for me.
TY very helpful !!
Thank you!!! Very helpful!
Trying this now. Hope it works 😭😭😭
Omg thank you for this info you have been so helpful but now idk why all my images are being printed out with the ink levels. Please help
Thanks for the video! P.S. I was definitely NOT offended by the trump sticker. LOL
I bought the cleaning solution you recommended and tried it but it hasn't worked. :(
If cleaning hasn’t worked, it may be time to buy new cartridges. I’m sorry the solution didn’t work for you.
You could also try the full instructions on the package, the way i did it was not the company’s recommended use. Just how I use it.
Thx!!! Subbed and liked. - do you use sublimation ink on heat transfer vinyl too? The reason I asked this is because sublimation ink doesn’t work on cotton or on dark garments. Thanks
De Mango you can sub onto white glitter vinyl for a dark garment. But that’s only if you desire the glittery look to the design. Also they do make a paper that is sublimation onto Cotton.
I found a link on amazon for you below. It’s way pricier than just buying a polyester sub straight but it’s useful if cotton is all you have!
Kate's Craft Store 50 Sheets 8.5"x11" Sublimation Paper for Cotton for Epson, Ricoh, and Sawgrass Printers with Sublimation Ink www.amazon.com/dp/B07MYBMMTS/ref=cm_sw_r_cp_api_i_TaUqFbS392Y74
You can also sublimate on white flock htv and glow in the dark ❤️
Hi I bought a used epson 7720 used one time can I still sub
Tiffany Zachery yes. You’ll just have to buy the cartridges and ink to convert it. Look on eBay, that’s where I bought mine.
www.ebay.com/itm/184230166886
Beast Mom DIY thank you so much
New subscriber
Happy to have you 🥰🥰
Great video! I am also a new subscriber!
Danyel Nicole Scott thank you! Happy to have you!
Thanks for the info
Thank you for this very informative video! New subscriber here! 👋🏽
Are you still sublimating
Yes i am! Just not as often
Yes, Anyone but Trump! Thank you for the video. It worked for me!
All we can do is cast our vote 🤷🏽♀️ The outcome is outside of my control.
I'm new to your channel.
Happy to have you! ❤️❤️
❤️ thanks for the info
Thank youi!!!!
You good boo. I will wear your shirt!
You should not have but the one tab in there. The one with the holde where you load.
This may be diff for 7710. But fixed lost of issues for me. Nonetheless, still issues with black after 4 mos. operation.
Girl!! Your facial expression had me on the floor. Lol.
😂🤣🤣😂
If I could upload a picture I would 😞 I’ve never had a problem after 2 1/2 years and now it’s all leveled off
When all else fails, try new cartridges. I’ve replaced mine once in 5 years of owning my 7210. But it’s a $30 drop in the bucket 🪣…
@@nicciclutch i was just telling my husband that exact thing. Thank you ☺️
👍
New subby here!! Thank you!!
Liked and subscribed to ya sis thanks for the help 💙🙌🏾🤎
haaaaaaaaa haaaaaaaaa IT WAS THE FACE FOR ME!!!!
Thank you for the video, and YES TRUMP 2020
You’re welcome....
#AnyonebutTrump2020 🥴
not offended but how's your biden working out for you hahahaha!!!!!
Not offended but… It says anyone but trump… who said I was for Biden? Thank you for your comment
How can I get that image 😂
AmysLIFELocsAndMakeup lol i found it on google...
Beast Mom DIY thanks.
alright already! get to the point!!!
Thanks for the video and I'm going to give this a try and hope it fixes my issue also!
#ANYONEBUTTRUMP2020
Happy to help
Thats not the print head thats just the ink cartridge and cleaning that dose absolutely nothing
It did absolutely something…. Make us a video how to clean it than! 😘
Exactly why i wouldn't subscribe....
🤷🏽♀️
Can't subscribe to anti-Trumper. Patriot and Military Vet here so Pro America.
🤗🤗🤗 Bye-Den
And you are Beautiful LOVE Always
Great video until you made it about politics .
🤷🏽♀️ I’m not responsible for hurt feelings as a result of this video... get over it... he lost 🤔
Dammm you made it till the end... you still feel that way about Trump?
And do 👌🏽
@@nicciclutch may i ask why?
Lol cause…. Trump 🤷🏽♀️ that’s why…
@@nicciclutch Ok.. great reason.
@@nicciclutch Just wanted to say thankyou.
yes you offended me
That’s too bad… I still don’t care 🤷🏽♀️ 😝😂😂
Thank you 🙏🏾. So helpful